Mr-Glass Windows & Doors Service Nationwide | TruePane Windows & Doors

Why Plantation Homeowners Choose Mr-Glass Windows & Doors

We provide independent Mr-Glass windows and doors repair, service, and replacement across Plantation, FL, for homeowners who own these windows and need a crew that actually knows how they fail in this climate. We are not a Mr-Glass factory rep and we will not pretend to be one. What we are is a local Plantation glazing company that has serviced Mr-Glass 6000, 7000, 8000, and 9000 Series windows across Broward County for over a decade, with the parts knowledge and the climate experience to fix them right the first time. Call (772) 577-2915 and a live person answers, day or night.

Call (772) 577-2915

Why Trust TruePane Windows & Doors for Your Mr-Glass Windows & Doors?

Our technicians have spent years working on Mr-Glass product lines in Plantation homes, from original 1960s aluminum frames in Jacaranda to newer impact-rated packages in Plantation Acres. We know which hinge, roller, and balance systems fail in this humid, salt-air environment, and we stock or source the right parts without ever pretending to be factory reps. Dale Kessler founded TruePane in 2008 after years of measuring, setting, and finishing windows across Broward County, and he passed one rule down to every tech: if the pane is not true, the job is not done. That means we measure twice, we register both warranty layers in writing before the truck leaves your driveway, and we stand behind the work for 90 days with no paperwork fights. No arguing. We will be there when we say.

Common Mr-Glass Windows & Doors Problems We Fix in Plantation

Mr-Glass windows are solid products, but Plantation’s heat, humidity, and salt air put real stress on their moving parts. Here are the five issues we see most often in this city:

• Coil balance failures on 6000 Series single hung windows. The 6000 Series uses coil balances mounted in the jamb. After several years of daily use in Plantation’s humidity, those coils snap at the shoe, and the sash either drops or will not stay up. We replace the balances with factory-spec equivalents and re-seat the sash so it holds in any position.
• Fuzzy weatherstripping pulling out of 7000 Series horizontal roller channels. The 7000 Series relies on fuzzy weatherstripping in the header and sill tracks. Broward County heat breaks down the adhesive, and the strip peels out, letting in drafts and water. We replace it with high-quality aftermarket weatherstripping cut to the exact channel width.
• Plastic latch tabs snapping on 8000 Series casements. The 8000 Series uses a plastic tab on the lock mechanism. Repeated cranking, especially on west-facing Plantation windows that bake all afternoon, makes the tab brittle. It snaps, and the window will not lock. We replace the lock assembly with an OEM part when available, or a machined aftermarket equivalent when it is not.
• Condensation between panes on older Mr-Glass insulated glass units. When the seal on an older Mr-Glass IGU fails, you get fog between the panes that you cannot wipe off. This is not a cleaning problem. The seal is blown, and the glass unit needs replacement. We measure, order, and set a new IGU, then register the manufacturer warranty in writing.
• Corroded rollers on 7000 Series horizontal sliders. The 7000 Series runs on nylon rollers in an aluminum track. Years of Plantation’s humidity and salt air corrode the roller axles, and the window starts binding or jumping the track. We pull the sash, replace the rollers, and clean the track so the window slides the way it did when it was new.

Mr-Glass Parts & Our Repair-vs-Replace Approach

We prefer OEM Mr-Glass parts for balances, rollers, and lock mechanisms when lead time allows, because those parts were engineered for the specific window. But for seals, weatherstripping, and screens, we use high-quality aftermarket equivalents that meet or exceed factory specs. That keeps your cost down without cutting corners. Our rule is simple: we repair before replacing whenever the frame is sound. A $60 balance or roller swap is often all a Mr-Glass window needs. But if the frame is pitted, the glass seal is blown, or the sash is warped, we will say so plainly and quote a proper replacement. You will get the truth, not a sales pitch. Call (772) 577-2915 for an honest assessment.

Our Mr-Glass Service Process - Step by Step

Every Mr-Glass repair in Plantation follows the same four steps, whether it is a simple balance swap or a full-frame replacement:

1. 1
   Diagnosis. We inspect the window or door in place, checking the balances, rollers, weatherstripping, lock mechanism, and glass seal. We identify the exact failure point and explain it in plain language before any work begins.
2. 2
   Repair or install. We pull the sash or panel, replace the failed Mr-Glass part or set the new unit, and re-seat everything with proper shimming. If a header inspection is required on a Plantation porch conversion, we coordinate it before the glass ever arrives.
3. 3
   Test. We cycle the window or door several times in front of you. The Mr-Glass 6000 Series sash holds in any position. The 7000 Series roller glides without binding. The 8000 Series casement cranks smooth and locks clean.
4. 4
   Warranty registration. Before the truck leaves your driveway, both warranty layers are registered in writing, with durations stated. The Done Right Promise covers the workmanship. No fine print, no arguing.

Mr-Glass Products We Service & Install in Plantation

We service and install the full Mr-Glass residential line in Plantation, including the 6000 Series Single Hung, 7000 Series Horizontal Roller, 8000 Series Casement, and 9000 Series Awning. We stock common coil balances, rollers, lock assemblies, and weatherstripping locally for fast turnaround on most repairs. For less common parts, we source directly through our supplier network and usually have them in hand within a few days. We also handle complete Mr-Glass window and door replacements when a repair no longer makes sense, including full-frame impact-rated installs that meet Broward County HVHZ requirements.

We Also Service These Brands

Mr-Glass is a big part of our Plantation work, but it is not the only line we know. We are authorized installers for PGT, CGI, CWS, and ES Windows, among others, and we quote side by side on paper so you can see exactly what you are buying. If you have a mixed house, we can service every window and door on the property in one visit.

FAQs - Mr-Glass Windows & Doors Service in Plantation

Why does my Mr-Glass single hung window fall shut when I try to open it?

That is a coil balance failure, and it is the most common Mr-Glass 6000 Series issue we see in Plantation. The coil balances inside the jamb snap at the shoe after years of daily use in this humidity. We replace both balances on the sash, not just the broken one, so the window holds in any position without a fight. Call (772) 577-2915 for a quote, estimates are free.

Can you replace just the glass in my older Mr-Glass window, or do I need a whole new sash?

In most cases, you can replace just the insulated glass unit without pulling the whole sash. We measure the existing IGU, order a matching unit, and set it in the original Mr-Glass frame. This works as long as the frame is sound and not pitted or warped. If the glass seal is blown or the frame is compromised, we will tell you straight and quote a full replacement. Call (772) 577-2915 for an exact assessment.

What causes Mr-Glass casement windows to get so hard to crank, and can you fix it?

Two things cause hard cranking on the Mr-Glass 8000 Series casement. The operator gears wear down from repeated use, and the hinge arms bind from corrosion in Plantation’s salt air. In most cases we replace the operator assembly and lubricate or replace the hinges, and the window cranks smooth again. If the plastic latch tab has also snapped off, we replace the lock assembly at the same time. Call (772) 577-2915 for a free estimate.

Do Mr-Glass horizontal roller windows have replaceable rollers, or do I need a new window?

Yes, the Mr-Glass 7000 Series has replaceable rollers mounted on the bottom of the sash. You do not need a new window just because it is binding or jumping the track. We pull the sash, replace both rollers with OEM or factory-spec aftermarket parts, and clean the track. The window slides the way it should. Call (772) 577-2915 to schedule the repair.

My Mr-Glass awning window leaks at the top when it rains hard - is that a seal or a hinge problem?

In Plantation, a top leak on the Mr-Glass 9000 Series awning is usually a weatherstripping failure at the header, not a hinge problem. The fuzzy weatherstripping wears down or pulls out, and heavy rain gets driven into the gap by wind. We replace the weatherstripping and reseat the sash. If the hinges are also loose, we tighten or replace them while we are in there. Call (772) 577-2915 and we will diagnose it on site.

How much does Mr-Glass windows and doors service cost in Plantation?

Most Mr-Glass repairs in Plantation fall between $60 and $400 depending on the part and the labor involved. A coil balance swap on a 6000 Series single hung typically runs $60 to $120 per sash. A roller replacement on a 7000 Series horizontal slider runs $80 to $150. A full IGU replacement on an older Mr-Glass window runs $200 to $400 depending on size and glass type. Full window replacements start higher and depend entirely on the product line and the opening. Call (772) 577-2915 for a written, line-item quote. Estimates are free, and the price we quote is the price you pay.

Book Your Mr-Glass Service in Plantation, FL

If your Mr-Glass window or door is giving you trouble, call us at (772) 577-2915. A live person answers 24 hours a day, 7 days a week. We will schedule a visit, diagnose the problem, and give you a written quote before any work begins. If the pane is not true, the job is not done.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Plantation since 2008.