PGT Impact Windows Nationwide | TruePane Windows & Doors

PGT Impact Windows in Plantation: What to Know First

We install, repair, and replace PGT impact windows in Plantation as an independent service provider, and most repairs are completed in a single visit. A true PGT window is a Florida-specific product built around laminated glass and heavy extruded aluminum frames, so the work is precise and the parts are not interchangeable with standard windows. Pricing is straightforward: we quote the job line by line before we start, and you will know whether we are replacing glass, hardware, or the entire unit before the first screw comes out. If you own a PGT window in Plantation and it is not closing right, fogging, or showing signs of seal failure, call us at (772) 577-2915 and we will tell you honestly whether it is a repair or a replacement.

Call (772) 577-2915

How PGT Products Fail - and How We Fix Them

• Fogged glass on PGT WinGuard and SpectraGuard units. This is the most common call we get from Plantation homeowners. The laminated glass in a PGT impact window has an interlayer that holds the pane together, but when the edge seal fails, moisture creeps in and fogs the inside of the glass where you cannot wipe it clean. On a WinGuard unit, the interlayer itself is usually still intact, so we replace the insulated glass unit rather than the whole window. That keeps the original frame and the Florida Product Approval intact.
• Roller failure on PGT sliding glass doors. In Plantation, driveway and patio drainage is often flat, so fine grit works its way into the bottom track of a PGT sliding door. The rollers wear down and the door starts to bind on the lock side. On PGT Series 550 and 770 doors, the rollers are replaceable, but they are press-fit and require the door panel to be lifted and set back on the track level. We replace the roller assemblies with the door weighed and the reveal rechecked, so the panel slides without dragging.
• Sticky or stiff casement operators on older PGT casement windows. On early-2000s PGT casement and awning windows, the crank operator gear is the weak point. After ten or fifteen years of South Florida humidity, the lubricant dries out, the gear teeth wear, and the sash will not seal tight against the weather stripping. We replace the operator with an OEM-spec part when available, and the window closes square again. On units where the sash hinge is worn too, we replace both so the pane seats evenly.
• Weep hole blockage on PGT single-hung and horizontal roller windows. Plantation gets heavy afternoon rain in summer, and a PGT frame is designed to drain water through weep holes at the sill. When those holes clog with pollen, dirt, or insect debris, water pools in the track and wicks into the interior. This is not a glass failure, it is a drainage problem. We clear the weep system, check the sill slope, and in some cases enlarge the lowest weep notch slightly, which is a manufacturer-approved adjustment on aluminum PGT frames.
• Warped or bent screen frames on PGT impact windows. The screens on PGT products are aluminum, and in a yard with active kids, dogs, or a stray golf ball, they get bent. A bent screen does not affect the impact rating, but it does let insects in and it looks worn. We rebuild screens with new frame and mesh and set them back in the channel square, so they do not rattle in the wind that comes through Plantation in the spring.

Our PGT Impact Windows Process

1. 1
   You call, a person answers. We take the details of the issue over the phone and ask the questions that tell us whether this is a glass problem, a hardware problem, or a frame problem before we schedule the visit.
2. 2
   We measure and diagnose on site. A technician arrives in a company uniform, measures the opening twice, and checks the square, level, and reveal. On a PGT unit, we also look for the etched product approval number to match the work to the right series.
3. 3
   We give you a line-item quote on paper. You will see the cost of parts, the cost of labor, and the specific PGT part or compatible aftermarket part we recommend. If an aftermarket part is the right choice, we tell you why; if OEM is the better call, we tell you that too.
4. 4
   We do the work in one visit when possible. The replacement glass, rollers, operators, or screens go in the same day. We set, shim, and secure everything before we call it done, and we verify the drain path is working before we leave.
5. 5
   We test the completed work with you. The window or door opens, closes, and locks in front of you. If you see something that is not right, we fix it on the spot.
6. 6
   We register both warranty layers in writing before the truck leaves the driveway. That is The Keystone Standard. You get the manufacturer coverage documentation and the Done Right Promise on the installation. If the pane is not true, the job is not done.

What PGT Impact Windows Costs in Plantation

Here is what we typically see on PGT work in Plantation, as a general range:

What moves the price is the size of the glass, the series of the PGT unit, and whether the sash or panel needs to be removed to do the work safely. Older PGT windows, especially pre-2005 models, sometimes have discontinued frame extrusions that change the parts path. We will tell you on the front end if that is the case and what your options are. Call (772) 577-2915 for a free estimate with a written line-item quote.

Why Plantation Homeowners Call TruePane Windows & Doors for PGT Work

We have been serving South Florida since 2008 through a craft commitment that goes back to Dale Kessler’s time learning glazing and fenestration at McFatter Technical College in Davie. Dale grew up off Broward Boulevard in Plantation, and the installs we do here are not jobs on a spreadsheet, they are work in the neighborhoods we know. We stand behind every PGT repair with the Done Right Promise: if it is not done right, we make it right, no paperwork and no arguing. And because we are an independent PGT service provider, we are not married to a single parts network. If a PGT part is discontinued or delayed, we can source a comparable replacement from CGI, CWS, ES Windows, or ECO Window Systems to keep your home protected on schedule. We measure twice, quote honestly, and a live person answers the phone 24 hours a day at (772) 577-2915.

FAQs