CGI Roof Repair Nationwide | TruePane Windows & Doors

CGI Roof Repair in Plantation: What to Know First

CGI roof repair in Plantation typically runs $350 to $1,800 depending on the damage and where the skylight, roof window, or roof-mounted glass sits. Most repairs take a single visit, and we quote the job on paper before any work begins so the price you approve is the price you pay. If you own a CGI product and it is leaking, fogged, or not closing square, call us at (772) 577-2915 and a live person will answer.

Call (772) 577-2915

This page is for Plantation homeowners who installed CGI roof windows, skylights, or glass roofing systems and now need someone who actually knows the product line. We are an independent CGI service provider, not a manufacturer warranty center, and that matters when the repair needs a judgment call. CGI builds a solid product. But every roof opening fails eventually in South Florida, and how it gets fixed determines whether you are back up on the roof in eighteen months or done with it for good.

Key Takeaways:

• We repair CGI roof windows, skylights, roof glass, and curb-mounted units in Plantation
• Free estimates, line-item written quotes, fixed pricing
• Most CGI roof repairs completed in one visit
• Both warranty layers registered in writing on any replacement part or unit
• Live person answers the phone 24/7 at (772) 577-2915

How CGI Products Fail - and How We Fix Them

CGI makes impact-rated roof products that hold up well against wind and debris. But Plantation’s combination of heavy afternoon thunderstorms, high humidity, and relentless UV exposure creates failure patterns we see repeatedly across the city. Here is what we find on CGI jobs in Plantation, and what we do about it.

• CGI Sentinel skylight glazing-gasket breakdown. The Sentinel series uses a structural glazing gasket between the glass and the aluminum frame. After eight to twelve years in Plantation sun, the gasket loses elasticity and hairline cracks form. Water does not pour in; it seeps, and by the time a homeowner sees a stain on the ceiling, the sheathing around the curb is already soft. We replace the gasket with an OEM-equivalent compound rated for South Florida UV, re-bed the glass, and torque the frame to spec. If the curb is rotted, we rebuild it before the unit goes back on.
• CGI Estate Collection roof-window operator gear wear. The Estate Collection outfitted many 1990s and early 2000s Plantation ranch homes with operable roof windows. The bronze operator gears wear smooth, and the window stops holding position mid-stroke. Homeowners sometimes force the crank, which bends the linkage arm. We replace the gear set and the linkage as a matched pair rather than fighting a bent arm back into tolerance. That is the difference between a repair that lasts and one that binds again next summer.
• CGI impact unit condensation between panes. Fogged glass on a CGI roof unit usually means the insulated-glass seal failed. On a vertical window you can live with fog for a while. On a roof unit, trapped moisture plus direct sun magnifies thermal stress, and cracks can follow. We replace the IGU with a new sealed unit, not a desiccant plug or a drill-and-fill hack that fails again in a year. The new unit gets registered under both warranty layers before we leave the driveway.
• CGI curb-mounted skylight flashing separation. Around Plantation, we see curb-flashing lifts most often on homes where the original roof was replaced without re-flashing the skylight. The new shingles or membrane go tight against the old flashing, and the first time a summer storm drives water sideways, it gets underneath. We remove the old flashing, inspect the curb, and install new flashing lapped correctly under the roofing material. This is the fix that should have been done at the last re-roof.
• CGI roof glass stress cracks from thermal movement. Large CGI roof lites on Plantation sunrooms or covered patios sometimes develop edge cracks that trace back to inadequate perimeter clearance at install. The aluminum frame expands and contracts, and if the glass was set too tight, the edge loads up until it cracks. We pull the lite, restore proper clearance, reset on fresh setting blocks, and re-glaze. If the opening was framed slightly off, we correct the frame before the glass goes back, because resetting glass in an out-of-square opening just invites the next crack.

Our CGI Roof Repair Process

Every CGI roof repair follows the same sequence, whether it is a skylight on a 1970s Plantation ranch or a roof lite on a newer custom build.

1. 1
   We inspect the whole opening, not just the symptom. Leaks travel. A stain on the bedroom ceiling might trace to a flashing gap four feet away. We look at the glass, the frame, the curb, the flashing, and the surrounding roof deck before we quote anything.
2. 2
   We put the diagnosis and the repair plan on paper. You get a written line-item quote with parts, labor, and any roofing work itemized separately. No allowances, no vague language.
3. 3
   We decide OEM versus aftermarket together. For structural components, gaskets, and impact glass, we recommend OEM or manufacturer-specified equivalent. For trim, sealant, and non-structural hardware where an aftermarket part matches or exceeds original quality, we tell you the cost difference and let you choose. We do not quietly install whatever is cheapest on the shelf.
4. 4
   We do the repair with the roof protected. Tarps down, proper ladder tie-offs, and no shortcuts on any penetration. Plantation afternoon storms arrive fast and we work like one is always thirty minutes out.
5. 5
   We test before we clean up. Water test where practical, torque check on fasteners, and a dry-cycle inspection of the seal. If it is not square, level, and in writing, it is not done.
6. 6
   We register the warranty and hand you the paper. Both layers, registered in writing, before the truck leaves the driveway. That is The Keystone Standard, and it is not optional on any job we do.

What CGI Roof Repair Costs in Plantation

CGI roof repair in Plantation prices by the failure, not by the hour. Here is what we typically see.

• Gasket or seal replacement on a sentinel skylight: $350-$650
• Operator gear set and linkage replacement: $400-$800
• Condensation or fogged IGU replacement: $500-$1,200 depending on glass size and coating
• Flashing repair or replacement around a curb-mounted unit: $450-$900, more if the curb itself needs rebuilding
• Full unit replacement with new CGI impact-rated glass: $1,200-$3,500 depending on size and model.

What moves the price: whether the curb or surrounding deck is rotted, whether the opening is out of square and needs correction, and whether glass is impact-rated or standard. We give you the number on paper before we start, and the number does not change once work begins unless you approve it in writing first. Call (772) 577-2915 and we will come measure and quote it for free.

Why Plantation Homeowners Call TruePane Windows & Doors for CGI Work

Dale Kessler grew up off Broward Boulevard in Plantation, when that stretch was half strip plazas and half open lots. He learned fenestration through the trades program at McFatter Technical College in Davie and spent two decades measuring and setting windows and doors across Broward County before founding TruePane in 2008. We are not a franchise playbook, and we do not treat your roof repair as a transaction. We treat it as a craft commitment.

Every CGI repair is covered by the Done Right Promise. If it is not done right, we make it right, no paperwork fight and no arguing about who caused what. Our techs are background-checked and uniformed, and they work in your house the way they would work in their own mother’s. We also install and service PGT, CWS, ES Windows, and ECO Window Systems, so if your CGI product is past repair and a replacement makes more sense, we can quote you line by line across brands and let you see exactly what you are buying. A live person answers the phone at (772) 577-2915, 24 hours a day.

FAQs