Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCWS Impact Windows in Plantation: What to Know First
CWS impact windows in Plantation are repaired and replaced by TruePane Windows & Doors on a straightforward schedule: most single-unit CWS repairs are completed in one visit, and full-home CWS replacement jobs are quoted in writing before any work begins. We are an independent CWS service provider, not a factory-authorized dealer, which means we make parts and replacement decisions based on what actually holds up in South Florida weather, not what a manufacturer’s program requires. If you own a CWS impact window or door that is fogged, binding, leaking, or failed an inspection, call (772) 577-2915 and a live person answers. This page is for Plantation homeowners who already know the difference between a real fix and a salesman’s promise.
How CWS Products Fail - and How We Fix Them
We work on CWS impact windows and doors across Plantation, from the older 3000 and 4000 series units still in service in Jacaranda and Plantation Acres to the newer 6000 and 8000 series installed after the 2007 code cycle. Each series has its own failure habits. Here is what we actually see in the field:
- CWS 3000/4000 series fogged glass packs. The laminated impact glass in early CWS units was sealed with a butyl-style edge seal that degrades faster in Plantation’s humidity and heat than in the manufacturer’s test conditions. The symptom is a milky haze between panes that never clears. The real cause is edge-seal failure at the spacer bar, usually at the bottom corners where moisture collects. We replace the glass pack with a current production dual-seal unit, reusing the original CWS frame when it is still square.
- CWS 6000 series hardware fatigue on outswing casements. The multi-point lock hardware on these casements runs through a narrow channel that accumulates salt grit and pollen. After five or six Atlantic seasons, the top lock pin stops seating, and the window will not close tight against the gasket. We see this most often in east-facing Plantation homes. The fix is a full hardware channel service and, where the pin is worn past tolerance, a new CWS-spec lock set. We never lubricate over corrosion and call it done.
- Binding slider panels on CWS 8000 series. The 8000 slider is a heavy panel. When the original installers skipped leveling the track or shimmed the frame off-plumb, the panel drifts and eventually binds at the meeting stile. This is an install defect more than a CWS defect, but the panel takes the blame. We correct the frame alignment, re-set the rollers to the proper height, and adjust the interlock. If the frame is too far gone, we tell you before we touch anything.
- Gasket compression set on CWS fixed and picture windows. The structural glazing gaskets on CWS fixed units lose their memory over time in direct sun. The window does not leak yet, but it will. The tell is a gasket that feels hard to the touch and pulls away from the glass at the corners. We re-glaze fixed CWS units with a silicone-compatible E-profile gasket that does not harden the same way in Broward County UV exposure.
- CWS 6000/8000 impact door threshold leaks. French and sliding impact doors built around the CWS 6000 and 8000 platform often fail at the threshold cap where the interlocking weather seal meets the sill. The original seal is a T-shaped vinyl extrusion that flattens permanently under ten years of foot traffic. We see standing water on the interior tile during the heaviest summer storms. The fix is a new threshold seal, re-bedded sill flashing, and a check of the door’s square before anything is reassembled.
Our CWS Impact Windows Process
- 1
Call and diagnosis. You call (772) 577-2915. We set a window of arrival and a technician shows up in uniform, background-checked, and carrying the tools to open a CWS unit without destroying the frame. We inspect the entire opening, not just the symptom.
- 2
The written finding. We give you a straight appraisal: what failed, why it failed, and what it costs to fix versus replace. If the frame is sound, we say so. If it is not, we say that too. No one gets a CWS frame rebuilt when it should be retired.
- 3
The parts decision. For glass packs and seals, we use current production CWS-spec materials where the original design holds up, and we recommend quality aftermarket alternatives only where the original was the problem. We tell you which is which and why. The quote lists the exact parts, not “materials.”
- 4
The repair. We remove, set, shim, seal, and close the unit the same way we would in our own homes: measuring every opening twice, setting the frame true, and cleaning the job site as we go. If the pane is not square, level, and true, the job is not done.
- 5
The test and the paperwork. We operate the window or door through its full range, check the water test on the sill with a controlled spray, and confirm the locks seat. Then we hand you the written workmanship guarantee and the closed-out job sheet.
What CWS Impact Windows Costs in Plantation
Here are the prices we quote most often for CWS impact window and door work in Plantation. These are ranges, not promises, and the written quote is always free.
- Single CWS impact glass pack replacement (fogged unit): $450-$900 depending on size and series
- CWS slider panel re-level and roller replacement: $250-$550
- CWS casement hardware service and lock set replacement: $300-$600
- CWS impact door threshold seal and sill re-bed: $350-$700
- Full CWS impact window replacement (per opening): $1,400-$3,200 depending on size, series, and code requirements
What moves the price: frame condition, access to the opening, whether the original install left the opening square, and whether Miami-Dade or Broward product approval paperwork is required for the replacement. Fixed pricing, no change orders, and every quote in writing before work starts. Call (772) 577-2915 for a free estimate on your CWS impact windows in Plantation.
Why Plantation Homeowners Call TruePane Windows & Doors for CWS Work
We have been serving Plantation and Broward County since 2008 through a craft tradition that started with Dale Kessler’s father on finish carpentry and continues today with the same rule on the whiteboard: if the pane is not true, the job is not done. Our technicians are background-checked and uniformed, and they show up when they say they will. Every job carries the Done Right Promise and The Keystone Standard: both warranty layers registered in writing, durations stated, before the truck leaves the driveway. We work on CWS, but we also service PGT, CGI, ES Windows, and ECO Window Systems products, which means our recommendations are based on what the window needs, not on what we happen to have in the warehouse. If you want a square deal on CWS impact windows in Plantation, call us.
FAQs
Most CWS impact window problems can be repaired: fogged glass packs are replaced while keeping the original frame, worn hardware is rebuilt, and failed seals are re-glazed. Full replacement is only the right call when the frame itself is out of square, water-damaged, or no longer meets current code. We tell you plainly which situation you are in before any money changes hands. Call (772) 577-2915 to have a tech look at your specific CWS unit in Plantation.
Independent repair work can affect manufacturer warranty coverage, and we tell you that truth before starting. In practice, many CWS owners in Plantation are already past their original coverage. Where warranty is still active, we point you back to CWS first. Where it is not, our written workmanship guarantee and The Keystone Standard cover what we do. The important thing is that you know the exact status before you decide. Call (772) 577-2915 and we will walk you through it over the phone.
A correctly installed CWS impact window in Plantation should give you a solid 20 to 25 years before the glass or hardware needs major work. The Florida heat and Atlantic moisture shorten the life of seals and gaskets faster than the manufacturer’s national averages, which is why we see edge-seal failures and hardening weather seals earlier here than in drier climates. We inspect for those early warning signs during our maintenance check. Call (772) 577-2915 to schedule one for your CWS windows.
In Plantation specifically, we replace more CWS glass packs for fogged seals and more threshold seals on impact doors than any other parts. The humidity in this part of Broward County accelerates edge-seal breakdown on older laminated units, and the daily heat cycles stress the vinyl weather seals on south-facing doors. Our techs stock the common CWS-spec parts on the truck, so most repairs happen in a single visit. Call (772) 577-2915 to describe what your window is doing, and we will tell you what it likely needs.
We schedule most CWS impact window repairs in Plantation within a few business days, and we do not leave the job until the window operates correctly and the paperwork is in your hand. We do not have a callback form or a voicemail tree: a live person answers the phone 24 hours a day, 7 days a week. Call (772) 577-2915 to schedule your free estimate.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Plantation and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.