Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCWS Sliding Glass & Patio Doors in Plantation: What to Know First
CWS sliding glass and patio doors in Plantation homes tend to fail in predictable ways: rollers wear flat, tracks collect grit from summer thunderstorms, and handles loosen until the door binds against the frame. We fix those problems as an independent CWS service provider, usually within a single visit for roller and track work, and we tell you plainly when a door has reached the point where replacement costs less than another repair. If you own a CWS door that no longer slides right, call (772) 577-2915 and we’ll schedule a real person to look at it.
This page is for Plantation homeowners who bought a house with CWS doors already in place, or who installed them years ago and have questions the original paperwork does not answer. We’re TruePane Windows & Doors, and Dale Kessler leads our shop. We have been working on South Florida sliding doors long enough to know which CWS problems are worth fixing and which ones are not.
How CWS Products Fail - and How We Fix Them
- CWS Series 6030 roller collapse. The single-wheel rollers in many 6030 sliders (common in Plantation homes built in the late 1990s and early 2000s) were never meant to carry a heavy impact-rated glass panel for twenty years. The nylon wheel flattens on one side, the door drops, and the panel starts grinding the track instead of riding it. We replace the roller assembly with a dual-wheel unit that spreads the load and gets the door back to a two-finger slide.
- Track pitting from Plantation’s wet season. CWS aluminum tracks hold up well in dry climates, but Plantation gets 60-plus inches of rain a year and the humidity never really leaves. Water sits in the track channel after storms, dirt collects, and the aluminum pits. A pitted track chews through new rollers in months. We can machine-smooth light pitting or install a stainless track cap over the worst sections without pulling the entire frame.
- Handle and latch misalignment on the CWS 8080 series. The 8080 patio door uses a two-point latch that ties into the frame jamb. Over time, as the slab settles and the header flexes (Plantation sits on a mix of muck and limestone that moves more than people think), the latch points drift out of line. Homeowners force the handle, the mechanism strips internally, and suddenly the door will not lock. The fix is a realignment of the frame screws and a new mortise lock assembly, not just a handle swap.
- Weep hole blockage causing frame rot and sill corrosion. CWS designs drainage weep holes into the bottom rail, but those holes clog with pollen, lawn clippings, and dust blown up by mowers. Water backs up inside the frame, and in a climate like ours that means accelerated corrosion on the interior screws and sill supports. On service calls we clear the weep holes, flush the bottom rail, and sometimes drill one additional weep at the low corner where water actually pools.
- Glass seal failure on early double-pane CWS units. CWS offered double-pane glass on several sliding door lines before impact ratings became standard in Broward County. Those older seals fail gradually, first as a haze you notice at sunrise, then as full fogging across the panel. No cleaning fixes that. We measure the glass pocket and replace the insulated unit, and we reglaze the panel so the door is square in the frame again. If the frame itself is still sound, a new glass unit is a third of the cost of a new door.
Our CWS Sliding Glass & Patio Doors Process
- 1
The call. You reach a live person at (772) 577-2915. You describe the door, the symptom, and we ask a few questions specific to CWS doors: which side binds, whether the handle is loose, if you see rust trails below the weep holes. That tells us what to bring.
- 2
The measure and diagnosis. A uniformed technician arrives and measures the opening twice. On a CWS door, we check frame plumb, track level, roller condition, and latch alignment before we touch a screwdriver. Dale Kessler grew up off Broward Boulevard in Plantation, and the lesson his father taught him about finish carpentry applies to every door we open: a frame out of plumb at the top will make your life difficult at the bottom.
- 3
The parts decision, on paper. We price OEM CWS parts and quality aftermarket alternatives side by side, with the difference explained in plain terms. Some CWS parts are worth the OEM price for the exact fit; some aftermarket rollers actually outlast the originals. You see the numbers before we order anything.
- 4
The repair or replacement. We work clean, we shim where shims belong, and we torque to specification. We do not reuse crushed rollers, we do not lubricate with spray that dries to a sticky film, and we do not leave a door that slides with a hitch at the end of the track.
- 5
The test and the warranty paperwork. The door gets opened and closed a dozen times under load, locked and unlocked, lifted for racking, and checked for daylight around the weatherstripping. Both manufacturer warranty layers are registered in writing before we leave the driveway, and our Done Right Promise covers the workmanship with no fine print that covers neither.
- 6
The cleanup. We sweep, vacuum, and take the old parts with us. You should not be able to tell we were there except that the door finally slides right.
What CWS Sliding Glass & Patio Doors Costs in Plantation
| CWS Repair Scenario | Typical Price Range |
|---|---|
| Roller replacement, single panel | $180 – $320 |
| Roller replacement, both panels | $320 – $520 |
| Track cleaning and cap installation | $140 – $260 |
| Latch and mortise lock replacement | $190 – $350 |
| Insulated glass unit replacement, per panel | $400 – $900 |
| Full CWS sliding door replacement | $1,800 – $4,500 installed |
What moves the price: panel size, whether the door is impact-rated, how far the frame has settled out of square, and the cost of CWS OEM parts versus aftermarket equivalents. We write the quote before work starts and we do not change the number once the door is apart. If the door is beyond a sensible repair, we will tell you that on the first visit. Call (772) 577-2915 and we will schedule a free estimate at your home in Plantation.
Why Plantation Homeowners Call TruePane Windows & Doors for CWS Work
We are a local company, not a franchise playbook. TruePane Windows & Doors has served South Florida communities since 2008 through Dale Kessler’s craft heritage and the shop he founded in 2008. When we work on a CWS door in Plantation, we treat it the same way we treat any door we did not install: honestly, carefully, and with a guarantee we actually stand behind. The Done Right Promise is simple. If the door is not done right, we make it right. No paperwork fights, no arguing. And because we are also authorized installers for PGT, CGI, ES Windows, and ECO Window Systems, we are never selling you a single brand for the sake of it. If your CWS door is done, we will show you replacement options side by side and register the warranties before the truck leaves your driveway.
FAQs
Most CWS residential slider warranties run 10 years on the frame and hardware, but the glass package often carries a separate, shorter coverage period. The real problem in Plantation is that warranties require the original purchase documentation and proof of proper installation, and many homeowners who bought a resale house have neither. We help customers pull the CWS serial stickers off the panel and contact the manufacturer with the right information. If the warranty is dead, we tell you exactly what that means before you spend a dollar on the estimate.
Yes, most common CWS parts (rollers, latches, handles, lock mechanisms) are available through our supply channels, either as OEM or as quality aftermarket equivalents that we have tested in the field. Some older CWS models have been discontinued, and in those cases we adapt compatible hardware rather than telling you to replace a perfectly good door over a $40 hinge. Call (772) 577-2915 and we will confirm availability for your specific series before scheduling the truck.
Repair is worth it when the frame is square, the glass is clear, and the problem is a wear item like a roller, handle, or track component. Replacement makes sense when the frame is corroded at the sill corners, the glass has failed on multiple panels, or the door no longer meets current Plantation code for hurricane protection. We will lay out both options with numbers and let you decide. The free estimate is exactly that.
If the panel has dropped off the rollers and is hanging on the frame, we treat that as a security and weather issue and typically get a technician to your Plantation home same-day or next morning, depending on when you call and where the truck already is. Most roller and latch repairs are done in one visit since our techs carry the common CWS parts on the truck. For glass or frame work, we schedule a follow-up once the parts arrive. A live person answers (772) 577-2915 at any hour and will tell you honestly what the timing looks like.
Yes. Both manufacturer warranty layers get registered in writing, durations stated, before we leave the driveway. That is The Keystone Standard, and it applies to every job, whether we are fixing a roller or replacing an entire door. If it is not square, level, and in writing, it is not done.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Plantation and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.