Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterES Windows Roof Replacement & Installation in Plantation: What to Know First
We handle roof replacement and installation work on homes with ES Windows products in Plantation, and most jobs wrap up within five to seven business days once materials land. As an independent ES Windows service provider, we’re not affiliated with the manufacturer, which means we quote honestly and fix what’s actually broken. If you own ES Windows and need roof work done around them, call us at (772) 577-2915 for a free estimate.
This page is for Plantation homeowners who have ES Windows units in place and need to know what happens when a roof project intersects with those frames, flashing, and glass. Whether you’re replacing the roof itself or installing new sections, the window-to-roof connection is where most failures start.
How ES Windows Products Fail - and How We Fix Them
ES Windows are well-built, but like every window line, they have specific weak points that show up in South Florida’s climate. Here’s what we see on service calls across Plantation:
- Flashing separation at the head jamb on the ES Elite series. Plantation’s afternoon downpours push water sideways, and the flashing detail on older Elite installs tends to lift after a few seasons of thermal cycling. We pull the head flashing, reset it with proper shingling, and reseal with a UV-stable sealant rated for our humidity.
- Weep hole clogging on ES Tilt & Turn units. These European-style windows have small weep channels at the sill that collect pollen and fine roof grit, especially during reroofing. Water backs up, finds the frame corner, and rots the rough opening. We clear the weeps, flush the sill track, and where the opening shows damage, we’ll sister in new framing before resetting the window.
- Roller wear on ES sliding door panels near recent roof work. Roof tear-offs drop grit and shingle granules onto the track. That grit chews up the rollers and the track itself. We’re replacing rollers on ES 100 and 800 series sliders throughout Plantation, then re-leveling the panel so the lock stile meets square.
- Laminated glass delamination at the edges on ES impact units. In homes where the roof was replaced and attic ventilation changed, the added heat load can accelerate edge delamination on older impact glass. It starts as a cloudy band along the frame. We measure the sash, confirm whether the IGU is in or out of the manufacturer’s seal warranty, and give you a plain-language replacement quote before any work starts.
- Frame racking after framing repairs tied to roof replacement. If a roofer’s crew re-trusses a section of roof and the wall plate shifts, the ES window frames pick up that movement. You’ll see a diagonal bind at the operator or a sash that won’t close cleanly. We check for square on every opening, shim to correct, and only button up the trim once the operator works without drag.
Our ES Windows Roof Replacement & Installation Process
When you call about ES Windows roof replacement or installation in Plantation, here’s the order of work:
- 1
We schedule the diagnostic visit. A technician comes out, measures the existing openings, and checks the window-to-roof interface for water intrusion, framing movement, or seal failure.
- 2
We put the findings on paper. You get a written line-item quote showing the repair or replacement options, with OEM and quality aftermarket parts listed side by side. No verbal estimates, no “we’ll figure it out later.”
- 3
We confirm parts before we cut anything. For ES Windows, we source through our distributor network and verify lead times before scheduling the job. You won’t be left with a tarped opening.
- 4
We do the roof-to-window work. Flashing, sealing, shimming, and any needed framing correction happen in one visit, with the repair tested for drainage and operation before we pack up.
- 5
We clean up and explain what we did. You walk the job with the technician before the truck leaves. If something isn’t right, it gets fixed then.
- 6
We register the warranty paperwork. Both manufacturer warranty layers go in writing before we leave your driveway. That’s The Keystone Standard, and it applies to every ES Windows job we take.
What ES Windows Roof Replacement & Installation Costs in Plantation
Pricing depends on whether we’re repairing the interface between an existing ES window and the roof, resetting a window after framing work, or installing a new ES unit as part of a larger project. Here are the ranges we quote in Plantation:
- Weep hole clearing, sill reseal, and flashing touch-up on one ES window: $185-$365
- Full flashing replacement and water-testing on a single ES window after reroofing: $425-$750
- Reset an ES window with new shims, insulation, and trim after framing correction: $600-$1,100 per opening
- New ES impact window supplied and installed, tied into existing roof flashing: $1,800-$3,400 per unit
- ES sliding door panel roller replacement and track re-leveling: $320-$580
What moves the price is the condition of the rough opening, whether the window needs to come out fully, and whether the flashing ties into a flat tile roof or a shingle roof. We quote flat, no change orders, and the number on the paper is the number you pay. Call (772) 577-2915 for a free estimate on your specific job.
Why Plantation Homeowners Call TruePane Windows & Doors for ES Windows Work
We’ve been serving Plantation and the surrounding neighborhoods since 2008, and we plan to be here another thirty. Dale Kessler, our owner, grew up off Broward Boulevard and learned the trade the slow way: through McFatter Technical College, then nearly twenty years of hands-on window and door work across Broward County. That local history matters when you’re checking a roofline against a window frame that’s been holding since before the Fashion Mall was torn down.
Our technicians are background-checked and uniformed, and a live person answers the phone 24/7. That’s not a call center. When we work on ES Windows, we also carry service knowledge on PGT, CGI, CWS, and ECO Window Systems, so if we spot a mixed-brand opening or a homeowner wants to upgrade an adjacent window, we can quote that honestly without bringing in a second company. We stand behind the work. If it’s not done right, we make it right under the Done Right Promise. No paperwork fights, no fine print.
FAQs
We service ES Windows products as an independent provider, which means we can diagnose, repair, and replace components, but we don’t act as a warranty agent for the manufacturer. If your ES window is under warranty, we’ll tell you what’s covered by the manufacturer and what falls to you, then quote the un-covered portion in writing before work begins. Call (772) 577-2915 and we’ll walk through it.
Where ES Windows OEM parts are available and make sense, we order them. Where a quality aftermarket part meets or exceeds the original spec, we’ll quote both options on paper so you see the cost difference. We never install a part we wouldn’t put in our own home, and we register all warranty layers in writing before leaving the driveway.
Most roofers aren’t window mechanics, and the damage we find after reroofing, especially in Plantation’s humidity, is usually in the flashing and the seal plane, not something visible from the roof. We check the head flashing, the weep system, and the frame for square. If it’s square, level, and watertight, we’ll tell you that, and you won’t pay for work you don’t need.
A single window reset or flashing repair is almost always done in one visit, same day for most Plantation jobs. Full replacement of multiple ES windows takes five to seven business days from material arrival, depending on the number of openings. We confirm your timeline in writing before we start, and we show up when we say.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Plantation and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.