Mr-Glass Door Installation Nationwide | TruePane Windows & Doors

Mr-Glass Door Installation: The Plantation Owner’s Guide

We stock and install Mr-Glass-compatible door hardware and components for Plantation homeowners, with most door part replacements running $180 to $650 installed depending on the specific component and your door’s size. Our trucks carry the most common Mr-Glass replacement parts, so a large share of these jobs get finished the same day we arrive. Most owners discover a problem the way you probably did: a door that suddenly drags against the header, a handle that turns without catching, or a roller that sounds like it’s grinding gravel every time the panel slides.

Call (772) 577-2915

Which Mr-Glass Models This Applies To

Mr-Glass produces sliding glass doors and framed glass door systems in a handful of series configurations, mostly built around 1-inch and 1-1/4-inch insulated glass units. The parts that fail on these doors – rollers, track assemblies, handle sets, latch hardware, and weatherstripping – are not universal. A roller assembly for an older Mr-Glass series with a bottom-mount adjustment screw will not swap into a newer top-adjust carrier without modifying the door panel, and that modification voids the warranty on the frame. We match parts by measuring the door stile thickness, the glass thickness, and the roller housing dimensions before ordering or pulling from stock. If your door has a label etched into the corner of the glass, that’s the quickest way to identify the series and date of manufacture. We’re an independent service provider, not affiliated with Mr-Glass directly, but we’ve worked on enough of their doors across Broward County to know which OEM parts are still worth buying and when a quality aftermarket equivalent performs better for Florida conditions. For Mr-Glass doors specifically, the OEM weatherstripping tends to be a softer vinyl compound that breaks down faster in our heat and humidity than a marine-grade aftermarket replacement.

Signs Your Mr-Glass Door Installation Is Failing

• The door drags or scrapes across the track. This is almost always a worn roller assembly. Once the nylon bearings inside the roller start to disintegrate, the door drops a fraction of an inch and the aluminum frame rides directly on the track. In Plantation, we see this most often on west-facing doors that bake in afternoon heat for years.
• The handle turns but the latch doesn’t engage. On Mr-Glass doors, the internal latch spring and pawl mechanism is a known weak point. When it fails, the door won’t lock securely even though the handle still moves through its full range. That’s a security issue, not just an annoyance.
• You hear a grinding or squealing sound when sliding. This means the roller bearings have lost their lubrication and are metal-on-metal. Replacing the rollers at this stage prevents track damage, which is a much more expensive repair.
• Condensation or fogging between the glass panes. The seal on the insulated glass unit has failed. On Mr-Glass doors with a 1-inch IGU, this usually means the entire glass pack gets replaced rather than repaired. Florida humidity accelerates seal failure once moisture gets in.
• The door is hard to lift or feels heavier than it used to. Sliding door panels are heavy, but they should move easily with one hand. Extra resistance usually means the rollers are bound up or the track has debris packed into the groove.

Replacement Cost & What’s Included

For Plantation homeowners, here’s what Mr-Glass door installation and parts replacement typically runs:

• Roller assembly replacement (2 rollers): $180 – $320 installed
• Track repair or replacement (per 6-foot section): $150 – $400 installed
• Handle and latch set (interior and exterior): $140 – $260 installed
• Complete weatherstripping kit: $120 – $220 installed
• Insulated glass unit replacement: $380 – $650 installed depending on glass size and tint

Every one of those prices includes the part, labor, and cleanup. We write the quote on paper before we start – you see the part cost, you see the labor, and there’s no surprise line item when the bill comes. The workmanship is covered by our Done Right Promise, and if you have a manufacturer warranty on the part, we register both layers in writing before the truck leaves your driveway. That’s the Keystone Standard on every job, including a Mr-Glass door repair in Plantation.

DIY or Call Us?

There are exactly two things you can safely do yourself: clean the lower track with a vacuum and a stiff brush, and check whether the adjustment screws on the roller housings are accessible without removing the door panel. Beyond that, this is not a weekend project. A sliding glass door panel weighs anywhere from 80 to 180 pounds depending on the glass package. Lifting one out of the track without proper blocking and a second pair of hands is how people end up with crushed fingers or a shattered tempered glass unit in the living room. Even with the panel out, the spring-loaded roller cartridge on some Mr-Glass series is under tension and will fire across the room if you remove it wrong. If you want to try the cleaning step first, go ahead – it sometimes fixes a dragging door. If the noise or binding persists, call us at (772) 577-2915 and we’ll send a technician who measures the opening twice and brings the right parts the first time.

FAQs