Mr-Glass Custom & Geometric Windows Nationwide | TruePane Windows & Doors

Mr-Glass Custom & Geometric Windows in Plantation: What to Know First

We install, repair, and replace Mr-Glass custom and geometric windows throughout Plantation as an independent Mr-Glass service provider we carry no factory affiliation, which means we quote the work honestly and use whatever parts actually solve the problem. Most geometric window repair jobs in Plantation are completed in a single visit, and every quote is free with a written line-item breakdown before anyone touches a frame. If you have an arched transom, a radius picture window, or an oversized opening that’s been leaking or fogging, call us at (772) 577-2915.

Call (772) 577-2915

This page is written for homeowners in Plantation who bought Mr-Glass windows years ago and are now dealing with the specific ways those products age in South Florida humidity. If you’re trying to figure out whether to repair or replace a custom shape, you’ll find straight answers below.

How Mr-Glass Products Fail - and How We Fix Them

Mr-Glass has produced several window lines over the years, and the ones we see most often in Plantation homes are their builder-grade aluminum frames and mid-range vinyl series. Geometric shapes add stress to every component, and the failure patterns are consistent:

• Arched and radius frame corner leaks. On older Mr-Glass aluminum radius units, the gussets and corner keys that hold the curved top rail to the straight jambs were the first point of failure. In Plantation, where afternoon thunderstorms drive rain sideways, a slight gap at that top corner shows up as a water stain on the drywall directly beneath the curved section. We disassemble the corner, reseat the key, replace the gasket, and reseal with a marine-grade polyurethane before reinstalling.
• Fogged insulated glass in trapezoids and pentagons. Mr-Glass geometric panes used a heat-seal spacer on certain production runs, and in South Florida the constant expansion and contraction from sun exposure breaks that seal faster than on rectangular glass. The symptom is exactly what you’d expect: condensation inside the glass that never dries. Since custom shapes can’t be re-sealed in the field, we order a matching IGU (insulated glass unit) cut to the original template, verify the glass meets Florida building code for your opening, and set it with fresh setting blocks.
• Operator hardware on casement-style geometrics. Some Mr-Glass geometric casements used a compact folding crank mechanism that corrodes in Plantation’s salt-air-adjacent climate, especially within two or three miles of the coast. Owners tell us the crank gets harder to turn every season and then locks up entirely. We replace the hardware with a heavier aftermarket operator, or when the customer prefers, an OEM-style match. The aftermarket unit we use is service-rated for more cycles than the original.
• Oversized opening sag. Mr-Glass sliders and fixed units designed for wide openings sometimes came with frames that were under-gauged for the span. In Plantation, homes built in the 1970s through the 1990s often have those extra-wide living room openings, and we see the classic signs: a door that binds at the top track in July, or a fixed pane that has pulled slightly out of square. We re-shim, re-square, and secure the frame at the correct intervals before resetting the glass.
• Flange and sealant failure on exterior cladding. Mr-Glass flanged geometrics installed during the 2005-2010 construction boom in Plantation neighborhoods like Plantation Isles and Jacaranda were often set with a single bead of commodity sealant. That sealant hardens, cracks, and pulls away from the stucco within fifteen years. The window itself may be fine, but the installation perimeter is not. We remove the old sealant, clean the substrate, and apply a sealant rated for the substrate and exposure, then verify the drainage plane before finishing.

Every fix starts with identifying whether the problem is the product, the installation, or the weather. In Plantation, it is usually all three taking turns.

Our Mr-Glass Custom & Geometric Windows Process

1. 1
   You call (772) 577-2915. A live person answers. We ask what you’re seeing, where the window is, and whether it’s leaking, fogged, binding, or cracked. Then we schedule a time that works, and we show up when we say we will.
2. 2
   We measure and diagnose in person. Our technician removes trim as needed, checks the frame for square and plumb, inspects the glass seal, tests operators, and photographs everything. Every opening gets measured twice. That’s not a slogan. It’s the process.
3. 3
   You get a written line-item quote. We spell out OEM versus quality aftermarket options where both exist, with prices side by side. If the job calls for a replacement geometric unit, we discuss manufacturer options and warranty implications before anyone signs anything. For Florida Product Approval questions, Dale walks you through the paperwork before you commit.
4. 4
   We order the exact glass or hardware. For custom shapes, we template the opening and order a unit cut to that template. We never guess on a radius.
5. 5
   We install, seal, square, and test. The frame gets shimmed and secured properly. The glass gets set with correct setting blocks and shims. Every gap gets sealed with the right sealant for the material. Then we operate the window, run water where appropriate, and confirm the opening is true.
6. 6
   We register the warranty layers in writing. Before the truck leaves your driveway, any manufacturer warranty is registered, and our Done Right Promise is on paper. If something is not right, we come back. No paperwork fights.

What Mr-Glass Custom & Geometric Windows Costs in Plantation

The honest answer is that a geometric window job in Plantation costs more than a standard rectangle of the same glass area. The shape drives the price, because every radius, angle, and trapezoid requires custom fabrication and slower, more careful installation. Here are the ranges we typically quote in this market:

• Insulated glass replacement for a small-to-medium geometric pane (one IGU): $320 to $680, depending on the angle count and whether low-E or impact glazing is required.
• Full frame repair and re-seal on a radius or arch window, including new gaskets and sealant: $480 to $950, depending on access, height, and perimeter condition.
• Operator and hardware replacement on a geometric casement: $210 to $410, including parts and labor.
• Oversized geometric window replacement (custom trapezoid, pentagon, or large radius): $1,800 to $4,200, driven by square footage, glass type, and whether the existing frame is salvageable.
• Full opening replacement for a corner window or curved glass assembly: $3,500 to $7,500, depending on engineering and impact requirements.

What moves the price in Plantation is the existing frame’s condition, whether the window carries a Florida Product Approval requirement, and how high the window sits. Second-story arched glass costs more because the access is harder, not because the labor is faster. Call (772) 577-2915 and we’ll give you an exact number in writing. Estimates are free.

Why Plantation Homeowners Call TruePane Windows & Doors for Mr-Glass Work

We have served local communities since 2008 through a heritage of craft, and the difference on a Mr-Glass job comes down to this: our technicians know what these windows do in this climate. We have seen the corner seal failures on the radius units, the sag on the wide sliders, and the corrosion on the cranks that Mr-Glass owners in Plantation deal with every year. When a part is discontinued or a frame is beyond saving, we can quote replacement options across manufacturer lines we know well, including PGT, CGI, CWS, and ES Windows, so you are never cornered into one answer.

Every job carries the Done Right Promise, backed by The Keystone Standard: both warranty layers registered in writing, durations stated, before the truck leaves the driveway. Uniformed, background-checked technicians measure every opening twice and quote side by side on paper. And when you call, a live person answers, 24 hours a day. That matters when you’ve got a fogged geometric pane and you want a real answer, not a callback form.

FAQs