Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTherma-Tru Sliding Glass & Patio Doors in Plantation: What to Know First
Therma-Tru sliding glass and patio doors in Plantation are not sold through big-box lumberyards the way Therma-Tru entry doors are. They come through select building-supply channels, which is why so many Plantation homeowners end up with a door no local contractor recognizes on sight. As an independent Therma-Tru service provider, TruePane Windows & Doors troubleshoots, repairs, and replaces these doors without manufacturer authorization, and most sliding-door repairs take one visit. Call (772) 577-2915 for a straight answer and a written estimate before you spend a dollar.
This page is for the Plantation homeowner who already owns a Therma-Tru patio door, or is weighing one, and wants to know what actually breaks, what it costs here, and whether the door can be saved. You will not find a sales brochure below. You will find what we see on job sites across Plantation week after week.
How Therma-Tru Products Fail - and How We Fix Them
Therma-Tru builds a solid entry door. Their sliding and patio doors, though, live a different life in South Florida, and the failure patterns we see in Plantation are consistent enough to name. Here are the five we fix most:
- Roller failure on the Classic-Craft sliding patio door line. The original nylon rollers Therma-Tru specs are smooth when new but wear flat within a few years of daily use, especially on larger panels. A flat roller drags, then hops the track, then chews the rail. We replace the rollers with sealed stainless-bearing units and machine the track lip smooth before setting the panel. The door should slide with one hand when we leave. If it takes two, the job is not done.
- Lock stile misalignment on older Therma-Tru patio doors. Plantation sits on soil that shifts with the wet season, and a slab that moves a quarter inch over fifteen years is enough to pull the lock stile out of line. Homeowners force the handle, then the strike plate bends, then the door will not latch at all. We re-shim and re-square the panel rather than leaning on the handle, because a forced latch is how you crack the lock mechanism entirely.
- Weep-hole blockage causing sill rot. Therma-Tru sills have drainage channels that clog with dirt, pollen, and the fine sand that blows in from the Everglades. Water pools, the sill extrusion wicks it into the frame, and the threshold starts to soften from inside. On Therma-Tru doors in Plantation we clear those weep channels on nearly every service call, whether the customer called about drainage or not. It is a two-minute step that prevents a thousand-dollar sill replacement.
- Insulated-glass seal failure on Therma-Tru patio panels. The South Florida sun works the desiccant seals until the glass fogs between panes. A fogged Therma-Tru panel is not automatically a full door replacement. We measure the glass pack and order a replacement insulated unit matched to the original Low-E spec, then reset the panel and rebalance it. It is a fraction of the cost of a new door, and the fix is warrantied in writing.
- Interlock post separation on multi-panel sliders. When one panel drifts out of square, the interlocking stiles stop meeting flush, and then you feel the draft before you see the gap. We correct the panel alignment and replace the interlock weatherstripping with a tighter durometer seal that holds up to Plantation humidity. The door closes like it was set yesterday.
Our Therma-Tru Sliding Glass & Patio Doors Process
- 1
The call. A live person answers at (772) 577-2915, listens to what the door is doing, and sets a time. No voicemail tree, no callback form.
- 2
The measure and diagnosis. A uniformed technician shows up on time, takes measurements twice, and names the problem before touching a tool. You get the diagnosis in plain language, plus what happens if you wait.
- 3
The parts decision. Where Therma-Tru OEM parts are still available and priced reasonably, we quote them. Where the OEM part is backordered or overpriced for what it is, we quote a quality aftermarket equivalent side by side on paper. You see the difference and you choose.
- 4
The repair or replacement. Work proceeds on the written estimate you approved. No surprise line items, no change orders, no second appointment left hanging. Most jobs finish in one visit.
- 5
The test. The door gets worked: open, close, lock, unlock, on the track, off the track, under the afternoon heat. Dale Kessler’s rule applies: if it is not square, level, and in writing, it is not done.
- 6
The guarantee. Both warranty layers are registered in writing before the truck leaves your driveway, and the Done Right Promise stands behind everything we touched.
What Therma-Tru Sliding Glass & Patio Doors Costs in Plantation
Straight numbers, based on what we bill across Plantation and the surrounding Broward County neighborhoods:
- Roller replacement on a Therma-Tru slider: $180-$340 depending on panel count and rail condition.
- Lock and latch repair or replacement: $120-$260.
- Weep-channel clearing and sill re-seal: $90-$180, often added to a larger service call.
- Insulated glass pack replacement for a fogged panel: $450-$900 depending on size and Low-E spec.
- Full Therma-Tru sliding door replacement, standard 6-foot opening: $2,200-$4,800 installed, with the spread driven by glass package (standard vs. impact-rated) and finish.
- Multi-panel Therma-Tru patio door replacement: $4,500-$9,500 depending on panel count, configuration, and impact requirements.
What moves the price in Plantation: whether the opening was built before or after the 1990s Florida Building Code changes, whether you need impact-rated glass, and whether the existing frame is salvageable or the rough opening needs re-shimming to square. We quote the real number in writing before work starts, not after. Call (772) 577-2915 for a free estimate on your specific door. Seniors and veterans get a permanent 5% discount across every job.
Why Plantation Homeowners Call TruePane Windows & Doors for Therma-Tru Work
TruePane Windows & Doors has served South Florida since 2008, and Dale Kessler grew up off Broward Boulevard in Plantation, close enough to the old Fashion Mall to remember when that stretch was half strip plazas. He learned glazing through the building trades program at McFatter Technical College in Davie, then spent two decades setting and finishing windows and doors across Broward County, with a particular reputation for tight-tolerance sliding-door installs and for walking customers through Florida Product Approval paperwork before anyone signs. That is who answers for the work.
Every job carries the Done Right Promise and The Keystone Standard: both warranty layers registered in writing, durations stated, before we leave. If it is not right, we make it right, no paperwork fight. We also install and service PGT, CGI, CWS, and ES Windows, so when a Therma-Tru door is beyond saving, we can show you side-by-side alternatives on paper rather than steering you toward whatever we happen to sell. The work is done by background-checked, uniformed technicians who treat your home the way they would treat their own mother’s.
Therma-Tru Sliding Glass & Patio Doors FAQs
No. Therma-Tru’s warranty covers manufacturing defects in the door and components. A repair performed by a qualified independent contractor like TruePane Windows & Doors does not void the warranty, provided the repair does not modify the door in a way the manufacturer prohibits. Our practice is to keep repairs within the original design spec precisely so your remaining warranty stays intact. Call (772) 577-2915 and we will tell you whether your specific issue falls under warranty or is a wear item before you commit to anything.
Yes, with a caveat. Certain Therma-Tru patio door rollers, tracks, and lock sets are still available through building-supply channels in Broward County. Other components, particularly for doors made before roughly 2010, have been discontinued. When OEM parts are backordered or gone, we source quality aftermarket equivalents and quote both options side by side on paper so you know exactly what you are buying. The estimate is free, and so is the honesty.
Repair if the frame is square, the glass is clear, and the failure is a roller, lock, or weatherstrip. Replace if the sill is rotted through, the frame has twisted out of square from slab movement, or the glass package no longer meets current Florida impact requirements for your home. In Plantation, a 20-year-old Therma-Tru door on a house built before the mid-1990s often costs more to bring fully current than to swap for a modern impact-rated unit, and we will show you the arithmetic before you decide.
We schedule most sliding-door repairs for the same week, and most jobs finish in a single visit. A live person answers at (772) 577-2915 and can tell you exactly what slots are open. You will not get a voicemail tree or a three-day callback.
Yes. Therma-Tru impact-rated patio doors carry heavier glass packs, which changes the roller load, the panel weight, and the way the door wears at the track. We set those panels with the extra weight accounted for from the first measurement, because an impact door on standard rollers is a door that will sag within two years. The fix is straightforward, and we do it the same day on most calls.
Ready to Get Your Therma-Tru Door Working Again?
Call (772) 577-2915 and you will talk to a person who knows Therma-Tru sliding glass and patio doors, knows Plantation, and will give you a straight quote in writing. Estimates are free. The work is done right, and we stand behind it.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Plantation and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.