Therma-Tru Roof Replacement & Installation Nationwide | TruePane Windows & Doors

Therma-Tru Roof Replacement & Installation in Plantation: What to Know First

Therma-Tru roof replacement and installation in Plantation typically runs between $1,800 and $4,600 depending on the door line, framing condition, and whether you’re dealing with a standard entry door or a larger door-with-sidelight configuration. Most Therma-Tru installations we handle are completed in a single day, though jobs with rotted sub-sills or water-damaged rough openings can stretch to two. We’re an independent Therma-Tru service provider in Plantation, not a manufacturer-authorized shop, which means we fix problems the way a glazier should: square, level, and in writing. If you own a Therma-Tru door that’s binding, leaking, or showing its age, call (772) 577-2915 and we’ll give you a straight answer and a free estimate.

Call (772) 577-2915

This page is for Plantation homeowners who bought a Therma-Tru door years ago, live with it every day, and want the replacement done right the first time. No brand fluff. No vague reassurances. Just what we see in the field, what it costs, and how we work.

How Therma-Tru Products Fail - and How We Fix Them

Therma-Tru builds a solid door, but every product line has its weak points. Here’s what we actually see on Plantation doorways, and what we do about it.

• Fiber-Classic and Smooth-Star skin delamination. These are Therma-Tru’s bread-and-butter fiberglass lines, and in South Florida humidity we see the outer skin start to separate from the foam core at the bottom corners, usually after ten to fifteen years of afternoon sun on a west-facing entry. The fix is a full slab replacement or a new pre-hung unit. We don’t patch delaminated fiberglass. It never holds. The repair looks fine for six months, then the Florida sun finds the seam and you’re back where you started.
• Tru-Defense door bottom sweeps failing early. Therma-Tru’s Tru-Defense system is a multi-point weather seal, and the bottom sweep on older Fiber-Classic units wears out faster than the rest of the assembly. Homeowners in Plantation notice it during the wet season, when water starts pooling inside the threshold after a hard afternoon storm. We replace the sweep with an OEM-equivalent part and re-shim the threshold so the door compresses the seal evenly. A door that seals at the latch but gaps at the hinge side is a threshold that was never set right.
• Slim-Line and Classic-Craft frames wicking moisture at the bottom corners. This is the failure we see most often on Therma-Tru installations done by other companies. The frame sits directly on the slab with no sill pan flashing underneath, and after a few hurricane seasons the bottom corners start to soften. By the time the door binds, the rough opening is already compromised. We cut out the rot, sister in new framing where needed, and set the new unit on a proper aluminum sill pan. That’s the step that gets skipped on the cheap installs.
• Benchmark by Therma-Tru (the builder-grade line) hinge screws stripping out of the jamb. We see this on Plantation homes built in the early 2000s. The original installer drove short hinge screws into the fiberglass jamb, and two decades of daily use have wallowed out the holes. The door sags, the latch misses the strike plate, and the homeowner thinks the whole unit is shot. Often it’s a fifteen-minute fix with longer screws into the stud behind the jamb. We’ll tell you if we can save the door instead of selling you a new one.
• Classic-Craft and Estate Collection doors developing stress cracks at the panel corners. These are the premium Therma-Tru lines with the authentic wood-grain look, and they’re beautiful doors. But the decorative raised panels can develop hairline cracks at the corners after years of thermal cycling in the Plantation climate. It’s cosmetic, not structural, but once water gets into the crack, the panel starts to swell and the crack widens. We recommend replacement before the damage spreads into the frame.

Our Therma-Tru Roof Replacement & Installation Process

Here’s how a Therma-Tru job goes at TruePane Windows & Doors, from the first phone call to the final walkthrough.

1. 1
   We answer the phone. A live person, 24 hours a day, seven days a week. Not a voicemail tree, not a callback form. You tell us what the door is doing. We ask the right questions.
2. 2
   We measure everything twice. Before we quote anything, we come out and measure the rough opening, check the existing frame with a level and a plumb bob, and look at the condition of the sub-sill and the surrounding trim. We don’t quote over the phone on a door we’ve never seen.
3. 3
   We put the options on paper, side by side. OEM Therma-Tru parts where they make sense, quality aftermarket where the warranty math works out better. We show you the difference in writing so you know exactly what you’re buying and why.
4. 4
   We pull the old unit and repair the opening. Any rot, any out-of-square framing, any water damage gets corrected before the new door goes in. You don’t hide a problem behind a new door. You fix it, then you hang the door.
5. 5
   We set the new unit, shim it true, and test it. Door swings smooth, latches without pushing or pulling, seals evenly all the way around. We operate it five or six times with you standing there. If something’s not right, we fix it before we leave.
6. 6
   We register the warranty layers in writing before the truck leaves the driveway. Both manufacturer warranties, with durations stated, plus our Done Right Promise. If it’s not square, level, and in writing, it’s not done.

What Therma-Tru Roof Replacement & Installation Costs in Plantation

Every job is different, but here’s what Plantation homeowners can expect to pay for common Therma-Tru scenarios.

• Therma-Tru slab replacement (standard entry door, no sidelights): $1,800 to $3,200. Uses your existing frame, replaces the fiberglass slab, hinges, and weather stripping.
• Full pre-hung Therma-Tru entry door replacement: $2,200 to $4,600. New slab, new frame, new threshold, new casing, and proper sill pan flashing. This is the fix that lasts.
• Therma-Tru door with one sidelight, full replacement: $3,400 to $5,800. More materials, more trim work, and the sidelight glass has to be matched or replaced to keep the assembly square.
• Frame repair and re-installation of an existing Therma-Tru door: $600 to $1,200. If the slab is still good but the frame has shifted, we can often pull the door, repair the opening, and re-set everything plumb.

What moves the price: water damage in the rough opening, whether you have storm-rated hardware, and whether the existing door is a standard size or something the builder special-ordered. We give free estimates with fixed pricing in writing. No surprises on the bill. Call (772) 577-2915 and we’ll come measure your door and give you a number you can plan around.

Why Plantation Homeowners Call TruePane Windows & Doors for Therma-Tru Work

Dale Kessler grew up off Broward Boulevard in Plantation, learned glazing and fenestration at McFatter Technical College in Davie, and spent nearly two decades setting doors on everything from 1960s ranch homes to new impact-rated construction across Broward County. He’s seen what a bad Therma-Tru install looks like five years in, and he built TruePane Windows & Doors to make sure that’s not how we leave a job. We’ve been serving Plantation and the surrounding communities since 2008 through the Kessler family’s craft tradition, and we plan to be here answering the phone in thirty more.

Every Therma-Tru job is covered by our Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before our truck leaves your driveway. If something isn’t right, we make it right. No paperwork fights, no arguing. We also install PGT, CGI, CWS, and ES Windows, which means if your Therma-Tru door needs a coordinated replacement with impact windows or a sidelight that matches a new window line, we can quote the whole job side by side and keep the work under one roof. A square deal, in writing, from a company that stands behind it. Call (772) 577-2915 for a free estimate.

FAQs