Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Sliding & Patio Doors Across Coral Springs
Most sliding glass door problems in Coral Springs come down to three things: age, water, and wind code. The homes here were built fast and tight between 1965 and 1990, and the original aluminum sliders are now 35 to 55 years old, corroded at the frame, fogged at the glass, and not rated for the High-Velocity Hurricane Zone the city sits inside. We replace them with NOA-approved impact doors, and we do it the way the city and your HOA both require. Call (772) 577-2915 and a live person answers, day or night.
Why TruePane Windows & Doors Is Coral Springs’s Preferred Sliding & Patio Doors Company
Dale Kessler founded TruePane in 2008 on a rule he keeps on the whiteboard: if the pane is not true, the job is not done. That rule matters even more in Coral Springs, where a sliding door has to close square, seal tight, and stand up to Broward County’s HVHZ wind-load requirements. We are not a franchise crew working a territory. We are local glaziers who know what a 1978 concrete-block home in Cypress Run looks like behind the stucco, because we have opened those walls.
Coral Springs homeowners call us because the work holds up. Every job is covered by the Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves the driveway. If it is not done right, we make it right. No paperwork fights, no arguing. Our Sliding & Patio Doors team has replaced hundreds of original aluminum sliders in this city, and we schedule Coral Springs jobs with a crew that knows the neighborhood roads, the HOA offices, and the permit desk.
We quote side by side on paper, manufacturer lines next to each other, so you see exactly what you are buying. Background-checked, uniformed technicians measure every opening twice. And a live person answers the phone 24 hours a day, 7 days a week. Not a voicemail tree. Not a callback form.
Our Sliding & Patio Doors Services in Coral Springs
Patio Sliding Doors
A patio slider in Coral Springs is a working door, not a decorative one. It gets used daily and it gets hit by afternoon thunderstorms that dump hard on flat ground. We replace old aluminum sliders with impact-rated units from PGT, CGI, and ES Windows, set level and flashed properly so water drains away from the opening instead of into it. Most patio slider replacements in Coral Springs run $1,800 to $4,200 installed, depending on size, brand, and what we find inside the wall when we open it.
Heavy-Duty Sliding Doors
Some Coral Springs homes, especially the larger lots in neighborhoods like Eagle Trace and Heron Bay, call for a wide-span opening with a heavy panel. Heavy-duty sliding doors use reinforced frames and stainless rollers that do not sag under a 300-pound panel. We frame these openings with the extra steel and waterproofing the HVHZ code demands, and we register both warranty layers before we leave the driveway. Expect to budget $4,500 to $9,000 for a true heavy-duty system, installed to code.
Pocket & Barn Doors
Pocket doors disappear into the wall, which makes them a smart fit for Coral Springs homes where floor space matters. The catch is that a pocket door hides its own hardware, so a sloppy install means a door that binds inside the pocket and cannot be fixed without opening the drywall. We frame pocket openings true, set the track level, and test the slide before any finish work goes back. Barn door installs run simpler but we still hang them on solid backing, not drywall anchors.
Panoramic Sliding Systems
For homeowners opening a living room to a screened lanai or pool deck, a multi-panel panoramic system gives you a wall of glass that folds or slides away. These are big openings, and in Coral Springs they are structural work, not trim work. We engineer the header, flash the entire span, and install only NOA-approved impact glass. A four-panel panoramic system in this market typically starts around $8,000 and moves up with size and finish choices.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Coral Springs
We install and service sliders from PGT, CGI, and ES Windows, and we know those manufacturer lines the way a mechanic knows a specific engine. That matters when a Coral Springs homeowner needs a replacement roller, a new track seal, or a warranty claim on a fogged insulated unit. We keep common parts for these brands in stock locally, and we can turn around a service call in this city faster because we are not waiting on a warehouse in another state.
Common Sliding & Patio Doors Problems We See in Coral Springs Homes
- Water intrusion at the sill and track seals: Coral Springs sits on flat, low-drainage land, and the afternoon thunderstorms hit hard. Original sliders were often set with a bead of caulk and nothing else, so water works its way into the track and the wall cavity. We rebuild the sill pan, flash the opening, and set the new door so water drains outward before it ever touches the interior.
- Fogged glass and failed insulated units: Fog between the panes is not condensation you can wipe off. It means the sealed argon fill has leaked out and the unit has lost its insulating value. We replace the glass unit and re-register the manufacturer warranty in writing.
- Corroded aluminum frames: The original aluminum sliders in this city are 35 to 55 years old. The frames corrode from salt air, humidity, and years of storm water, and the rollers seize. We see entire subdivisions where every home on the street has the same failing door, because they were all built the same year.
- Non-impact doors triggering HVHZ code upgrades: When you pull an old non-rated slider and open the wall, the permit often requires the entire opening be brought up to current HVHZ wind-load standards. That means new framing anchors, a proper header, and full waterproofing. We price that upgrade honestly before the job starts, not as a surprise after the wall is open.
Pricing for Sliding & Patio Doors in Coral Springs, FL
A standard patio slider replacement in Coral Springs runs $1,800 to $4,200 installed. Heavy-duty sliders run $4,500 to $9,000. Pocket door retrofits run $2,200 to $5,000, and barn door installations run $1,200 to $2,800. Panoramic systems start around $8,000 and climb with panel count and finish. The two things that move a quote in this city more than anything are the HOA frame-color restriction and what we find behind the old door when the wall is open. We write allowances into every contract for framing, waterproofing, and stucco repair, and any change is priced and approved in writing before we touch it. Call (772) 577-2915 for a free estimate with line-item pricing on paper.
We Also Serve Cities Near Coral Springs
Our crews serve Coral Springs and the surrounding Broward County communities, including Margate, Pompano Beach, Plantation, and Fort Lauderdale. Dispatch and scheduling are coordinated from our Miami office, but the teams working your home are local to this area and know the HOA boards and permit requirements on every street.
Serving Coral Springs, FL - Our Local Coverage Area
We’re based in the Coral Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Coral Springs
Yes, in most Coral Springs communities you need HOA architectural approval before ordering a new sliding door, especially if the frame color is changing. Many neighborhoods here restrict frame finishes to bronze or white. We handle the HOA paperwork as part of the job, and we order only after the approval is in hand. Call (772) 577-2915 and we can tell you what your specific HOA requires.
Coral Springs sits fully inside Broward County’s High-Velocity Hurricane Zone, so any replacement must use NOA-approved impact products. The city also has an unusually high density of active HOAs, a legacy of its master-planned origin, which means architectural approval and frame-color restrictions are part of nearly every job. Margate and Coconut Creek have similar code requirements but fewer HOA hurdles on average. We handle both the code and the HOA so you do not have to navigate either alone.
When the wall is opened and the city requires the opening to be brought to current HVHZ standards, that scope belongs to you as the homeowner. That is why we write allowances into every Coral Springs contract for framing, waterproofing, and stucco repair, and why we price any surprise in writing before we touch it. You approve the change order before the work starts. Call (772) 577-2915 for a quote that includes those contingencies up front.
Fog between the panes means the sealed argon fill has escaped and moisture has entered the glass unit. You cannot wipe it off and your energy efficiency is gone. On most Coral Springs homes the original insulated units are 20 to 30 years old, so we typically replace the glass unit and re-register the manufacturer warranty in writing. Call (772) 577-2915 to schedule a look at the door.
Yes. On a 1978 concrete-block home in the Cypress Run neighborhood, our techs pulled a corroded aluminum sliding door and found the original frame-to-block penetration had never been flashed, just dried caulk over untreated wood shims. We cut back the failed stucco, wrapped the jamb in flashing tape, and set a ViewLux impact-rated slider with an NOA-approved bronze frame. The HOA approval added three days to the job, but the opening now drains before water reaches the interior. We know which communities here demand bronze and which demand white, and we order after approval, never before.
Call (772) 577-2915 to schedule your free estimate for sliding or patio door work in Coral Springs. A live person answers 24/7. We quote on paper, register both warranty layers in writing, and stand behind the work with the Done Right Promise.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Coral Springs with honest craftsmanship and a square deal.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.