Andersen Door Installation Nationwide | TruePane Windows & Doors

Andersen Door Installation in Plantation: What to Know First

Andersen door installation in Plantation typically runs $350 to $1,800 for labor on an entry or French door, with full replacement projects landing between $2,500 and $9,000 depending on the door line, size, and whether impact glass is part of the equation. Most Andersen door work in Plantation homes is completed in one visit, which means we measure, set, shim, and seal without a second appointment hanging over your head. We are an independent Andersen service provider, not a factory branch, which means our interest is in the door working right in your house, not in moving boxes for a quota.

Call (772) 577-2915

This page is written for Plantation homeowners who already own an Andersen door, or are about to, and want the installation done by people who know how Andersen frames, hinges, and weatherstripping behave in South Florida humidity. If your Andersen door is binding, sagging, letting water in at the threshold, or simply overdue for a straight, plumb, warrantied install, call (772) 577-2915 and we will talk you through it.

How Andersen Products Fail - and How We Fix Them

Andersen builds a solid door. But every product line has its habits, and after more than four decades of setting doors in Broward County, we know exactly where Andersen doors show their age. Here is what we see on the service side in Plantation, and what we do about it.

• Sagging panels on the 400 Series Frenchwood hinged patio door. The 400 Series Frenchwood is a common sight in Plantation homes built in the 1980s and 1990s. The active panel is heavy, and over years of South Florida heat and settling on slab foundations, the hinge-side frame drifts just enough that the door starts dragging on the sill. The door did not shrink; the frame shifted. We pull the interior casing, re-square the rough opening with shims, re-hang the slab, and reset the reveal so the panel swings clean.
• Warped sills on the A-Series hinged door in full-sun exposures. The A-Series line uses a wood core with an exterior cladding, and on west-facing Plantation doors that take direct afternoon sun ten months of the year, the sill can cup or degrade if the original installer skipped a proper pan flashing. Water gets underneath, the wood core drinks it, and the sill begins to rot from the inside out. We pull the unit, set a proper sloped pan, install new sill flashing with end dams, and reset the door so water sheds away from the house, not into it.
• Worn astragals and weatherstripping on 200 Series Narroline French units. The Narroline French door has a center meeting stile where the two panels close. That center seam is where air and water get in when the astragal wears down or the weatherstripping compresses. Homeowners feel a draft in December and a damp spot in August. We replace the OEM astragal and gasket, realign the panels, and adjust the interlock so the two doors meet flush and stay weathertight.
• Threshold leaks on older gliding patio doors where the frame was never squared to the slab. Plantation sits on land that moves, especially in neighborhoods built over former swamp and fill. When an Andersen gliding door is set on a slab that has settled a quarter-inch over twenty years, the threshold pitch reverses and water runs toward the house instead of away. We re-pitch the threshold, level the track, and re-seal the rough opening from the outside in. This is not a caulk fix; this is a set-the-door-where-the-slab-is fix.
• Stripped hinge screws on heavy inswing entry doors with wood frames. Andersen entry slabs, especially solid wood A-Series and older Eagle line doors, are heavy. When the factory hinge screws strip out of the jamb due to repeated stress or a previous installer who used the wrong fasteners, the door drops. We drill, fill with hardwood dowel, re-bore pilot holes, and set longer screws that bite into the rough framing behind the jamb, not just the 3/4-inch jamb stock.

Our Andersen Door Installation Process

We do this the same way on every Andersen door in Plantation, whether it is a single entry slab or a four-panel custom unit. No shortcuts, no skipped steps, no surprises at the end.

1. 1
   Call and measurement. A live person answers at (772) 577-2915, takes the details of your Andersen door and the problem you are seeing, and schedules a time. Our tech arrives in uniform, with a background check already on file.
2. 2
   Site inspection and rough-opening check. We open the interior casing points enough to measure the rough opening, check for plumb and level on the existing frame, and identify whether the slab or the framing is the reason the door is not sitting right. We measure every opening twice.
3. 3
   Parts decision: OEM versus quality aftermarket. For Andersen doors, we use Andersen factory parts where they matter most: weatherstripping, hinges, locksets, and glazing beads. For non-structural hardware like shims, flashing, and sealants, we specify materials that exceed the builder-grade stuff most original installs used. We put the choice in writing before we touch the door.
4. 4
   Removal, prep, and set. Out comes the old unit or the old door slab. The rough opening gets cleaned, squared, and flashed. The new Andersen door goes in level, plumb, and square. Dale Kessler’s rule from his framing-carpenter father applies: if it is not square, level, and in writing, it is not done.
5. 5
   Seal, test, and register warranties. We seal the exterior perimeter, install trim and weatherstripping, then run the door through open, close, lock, and seal tests. We check the reveal around all four edges, adjust the threshold pitch, and confirm the door swings or slides without binding. Before the truck leaves your driveway, both warranty layers are registered in writing with their durations stated. That is The Keystone Standard, and it is not optional.

What Andersen Door Installation Costs in Plantation

We quote Andersen door work honestly, because a homeowner who has been burned once is not going to tolerate a bill that grows after the first day. Here is what you should expect in the Plantation market.

• Entry door slab replacement (Andersen 200 Series or 400 Series): $650-$1,800 installed, depending on slab weight, frame condition, and hardware changes.
• Frenchwood hinged patio door (two-panel, standard size): $3,200-$6,500 installed, including threshold and flashing replacement.
• A-Series hinged or gliding door (larger openings, custom sizes): $4,500-$9,000+ installed, with wood frame and full perimeter flashing work.
• Storm door installation (Andersen 3000 Series or comparable): $400-$900 installed, including hinge and closer adjustment.
• Threshold, weatherstripping, or hinge repair only: $180-$450, which covers the fix without replacing a functioning door.

What moves the price is usually the condition of the rough opening, the size of the unit, and whether impact-rated glazing is required. Every Andersen estimate is free, line-item, and fixed before we begin. Call (772) 577-2915 for an exact number on your door.

Why Plantation Homeowners Call TruePane Windows & Doors for Andersen Work

We are not the cheapest bid you will get on an Andersen door in Plantation, and we are not trying to be. Dale Kessler founded TruePane Windows & Doors in 2008 after years of seeing out-of-true installs and voided warranties, and he built the company around one promise: every job is covered by the Done Right Promise. If it is not done right, we make it right. No paperwork fight, no arguing, no fine print that covers neither.

Every TruePane tech is background-checked, uniformed, and trained on Andersen’s door geometry and hardware. And because we are an authorized installer for over a dozen manufacturer lines, including, PGT, and CGI, we can show you side-by-side quotes on paper if you are weighing replacement options. A live person answers the phone 24 hours a day, seven days a week. When you call, you get a person. Not a voicemail tree, not a callback form, and not a regional call center in another state.

FAQs