Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCWS Door Installation: The Plantation Owner’s Guide
CWS door installation in Plantation typically runs $450-$1,200 installed for a standard hinge, roller, or threshold replacement, and we keep common CWS-compatible hardware on the truck so most jobs are done in a single visit. You usually discover the problem the same way every Plantation homeowner does: the door starts dragging across the track in June, or the handle stops retracting the latch in January, or you notice daylight through the weatherstripping that wasn’t there last hurricane season. Call us at (772) 577-2915 and we’ll match the part to your door before we ever ring the bell.
Which CWS Models This Applies To
Most of the CWS doors we service in Plantation are sliding glass door systems and hinged impact-rated entry doors from the company’s coastal and hurricane-rated lines. CWS hardware is not universal; some series use a recessed roller assembly that sits in a narrow channel, while others take a surface-mount roller that bolts to the stile. If you can still read the sticker on the top edge of the door panel, the series number is usually printed there. If the sticker is long gone, we measure the roller housing mouth, the overall stile width, and the track profile in three places before we reach for a part. TruePane Windows & Doors is an independent service provider, not affiliated with CWS, but we match their OEM hardware and carry quality aftermarket equivalents where the original part has a known weak point. One compatibility gotcha we see regularly in Plantation: CWS stainless steel rollers made after roughly 2012 use a different axle barrel diameter than the pre-2012 brass versions, and the two do not interchange without drilling out the housing. We carry both on the truck.
Signs Your CWS Door Installation Is Failing
- The door gets stiff in summer and loosens in winter. Aluminum expands in Florida heat, and a CWS door with a roller installed too tight to the track binds in July. You might only notice it now because Plantation’s summer humidity makes the frame swell just enough to shave the clearance.
- You hear a grinding or metal-on-metal rattle when the panel moves. That’s a roller bearing that has lost its seal. South Florida grit works into the race, the ball bearings chew themselves up, and the door starts riding on the axle instead of the wheel.
- The latch no longer fully retracts into the door slab. The internal spring in a CWS mortise handle is the first thing to fail after fifteen or twenty years of daily use. When it goes, the latch drags across the strike plate and carves a groove into it.
- Water pools at the threshold after a heavy rain. The rubber cap on CWS threshold kits dries out and splits under UV exposure. Once that cap cracks, water wicks under the aluminum track and into the subfloor. In Plantation, where afternoon thunderstorms are a daily summer occurrence, this is the most common complaint we hear.
- The door panel sits visibly off-level in the frame. If the gap at the top of the panel is wider at the strike side than the hinge side, the problem is almost always a pair of rollers with uneven wear, not a settling frame. Swapping one side instead of both just moves the problem to the other roller.
Replacement Cost & What’s Included
Here’s what we quote for CWS work in Plantation, installed, including the part:
- Roller replacement (pair), sliding door: $180-$340 installed
- Mortise handle and latch assembly: $220-$410 installed
- Threshold cap and weatherstripping: $150-$290 installed
- Full door re-hang and square (labor-heavy): $450-$1,200 depending on frame condition and hardware reuse
The range exists because some CWS doors open up clean and level, and some have been fighting a racked frame for eight years. We price the part separately, we price the labor separately, and we put both numbers on paper before we touch the door. You won’t find a surprise line item for “miscellaneous hardware” on a TruePane invoice. And the work is covered by our Done Right Promise: if it is not done right, we make it right, with no paperwork fight.
DIY or Call Us?
A homeowner can safely check three things before picking up the phone: read the series sticker on the door edge, note where the panel binds or scrapes, and take a straight-edge to the track to see if it’s bowed. What a homeowner should not attempt is pulling a CWS sliding panel out of the frame alone. Those panels run 150 to 300 pounds, and once the panel tips past the track lip, it folds onto whoever is underneath. We’ve also walked into more than one Plantation home where the owner tried to “adjust” the roller with a pair of pliers and stripped the adjustment screw square. That turns a $240 roller swap into a $600 hardware extraction. Call (772) 577-2915 and let one of our background-checked, uniformed technicians do the lifting and the leveling. The estimate is free.
FAQs
Plan on 8 to 12 years for OEM CWS stainless rollers in Plantation, less if the door faces west and takes full afternoon sun, less still if the track has never been vacuumed. Salt air near the coast and humidity cycle fatigue both shorten that window. We also stock parts for Andersen, and Pella doors where the wear pattern is similar but the roller specs differ.
No. Once the bearing seal fails, the water and grit are inside the race. Cleaning and regreasing buys a few quiet weeks, not a fix. Replacement is the only repair that holds. Call (772) 577-2915 and we’ll tell you honestly if we can save the housing or need to swap the full roller assembly.
A roller replacement takes about 45 minutes. A handle and latch swap runs 30. A full re-hang with frame correction can take two to three hours. We do most CWS parts jobs in a single visit because we carry the common hardware on the truck and measure everything twice before we start, the same way Dale Kessler was trained to do at McFatter Technical College in Davie.
We stock the common CWS rollers, mortise handles, threshold caps, and weatherstripping for the door series most often installed in Broward County. Oddball parts or discontinued series take a few days to source, and we’ll tell you that before we schedule. If it is not square, level, and in writing, it is not done.
Call TruePane for CWS Door Installation in Plantation
We’ve been doing this work in Plantation and across Broward County for more than years, and we stand behind every part we install. Call (772) 577-2915 for a free estimate, and we’ll match the hardware to your CWS door, put the price in writing, and register the warranty before the truck leaves your driveway.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Plantation and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.