CWS Sliding & Patio Doors Nationwide | TruePane Windows & Doors

CWS Sliding & Patio Doors in Plantation: What to Know First

CWS sliding and patio doors in Plantation are good doors when they’re set right and maintained, but most of the CWS doors we open up in this city have the same two problems: rollers worn past their service life and weatherstripping that hardens faster in our heat than anyone expects. We’re an independent CWS service provider, not a factory arm, and we repair or replace CWS sliding and patio doors across Plantation — typically in one visit, always with a written quote before work starts. If you own a CWS door in Plantation and it drags, sticks, leaks, or won’t lock, this page tells you what’s actually going on and what it costs to make it right. Call (772) 577-2915 for an exact price on your door.

Call (772) 577-2915

How CWS Products Fail — and How We Fix Them

• Roller fatigue on CWS 800 Series sliders. Most CWS doors in Plantation ride on twin steel rollers that were never designed for twenty years of daily use in salt-adjacent air. We see the same progression over and over: the door gets heavy in the track, then it starts grating, then the homeowner yanks harder and bends the frame. We replace CWS rollers with stainless or sealed-bearing aftermarket rollers and reset the door so it carries true on the rail — not riding on the glass.
• Track channel erosion from South Florida humidity. Plantation sits on old canal soil; the ground holds moisture, and CWS tracks made of extruded aluminum will pit and catch debris at the weep holes after enough wet seasons. A pitted track will eventually lock the rollers in place. We clean and re-dress the channel, or install a track overlay when the channel is too far gone to restore.
• Weatherstripping compression set on CWS patio door panels. The vinyl and rubber CWS uses around the meeting stiles and along the bottom sweep is a known weak point in this climate — it takes a compression set from constant heat and then the seal lets air, water, and bugs through. We replace CWS factory stripping with a denser, heat-rated profile that’s cut to length on site and tested with a dollar-bill pull before we leave.
• Locking rod misalignment on multi-point CWS patio hardware. Most CWS patio doors in Plantation have a two- or three-point lock system. When the panel settles or the house moves (and on our soil, it does), the rods no longer seat squarely into the keepers. The fix is not forcing the hardware — that bends the rods to the point of no return. We adjust the keepers and re-shim the panel so the lock engages with one hand.
• Fogged glass and failed seals on older CWS sliding units. If your CWS door has moisture between the panes, the seal has failed — you cannot dry that out, and no cleaner will fix it. We measure the opening, order a replacement insulated glass unit to the original CWS dimensions, and set it with new setting blocks. On CWS doors built before the 1990s, we also check the frame for hogging before ordering glass, because a door that has sagged will crack a new IG unit within a season or two.

Our CWS Sliding & Patio Doors Process

1. 1
   You call (772) 577-2915. A person answers — not a phone tree, not a callback. We ask what the door is doing and schedule a visit.
2. 2
   We measure and diagnose on site. We check the door slab, the track, both rollers, the lock rods, and the glass condition. We measure a second time. Every opening gets measured twice.
3. 3
   You get a written line-item quote. We walk you through OEM vs. aftermarket part options and their prices, side by side, on paper. You choose. We don’t bid one thing and deliver another.
4. 4
   We do the work with the right parts and the right shims. For a repair, that usually means one visit. For a full replacement, we order the CWS-compatible size and set the new panel when it arrives.
5. 5
   We test and show you the test. We slide, lock, seal-check, and level-check the door while you watch. If something’s off, we fix it before we run the truck.
6. 6
   You get the Done Right Promise in writing. If it’s not right, we come back and make it right. No argument, no fine print, no warranty shuffle.

What CWS Sliding & Patio Doors Cost in Plantation

Here are honest ranges for the CWS sliding and patio door work we do in Plantation — your exact price depends on door width, glass type, and how far the hardware has gone:

• Roller replacement (both rollers, standard CWS 800 Series): $140–$260
• Roller + track dress + weatherstripping refresh: $220–$430
• Multi-point lock rod alignment with shims: $110–$240
• Fogged glass replacement (single CWS sliding panel, standard low-E): $380–$780
• Full CWS sliding door replacement (standard 2-panel, 72" x 80"): $1,800–$3,600, depending on impact rating, glass package, and frame work needed

What moves the price most on a CWS door in Plantation is the glass and the condition of the frame. If the frame is square and sound, a repair usually makes more sense than a replacement. If the frame has settled or the rollers have chewed the track, pouring money into a door that’s already past its geometry is a bad deal. We’ll tell you which situation you’re in — and why — before you spend a dollar. Call (772) 577-2915 and we’ll give you a free, written estimate for your CWS door.

Why Plantation Homeowners Call TruePane Windows & Doors for CWS Work

We’ve been serving Plantation and the surrounding county since 2008 under the TruePane name and through Dale Kessler’s family before that. Dale grew up off Broward Boulevard and learned glazing at McFatter Technical College in Davie, so he knows exactly what CWS doors do in a 1970s Plantation ranch versus a newer east Plantation home — and he runs his crews to that standard. Our technicians are background-checked and uniformed. They measure every opening twice. They register both warranty layers in writing before the truck leaves the driveway — that’s the Keystone Standard, and it applies to CWS work, no exceptions. If something is not right, we come back under the Done Right Promise — no paperwork fight. And because we’re an authorized installer for more than a dozen manufacturers —, PGT included — if your CWS door is beyond saving, we can put a better door in the same opening and show you side-by-side quotes so you’re not guessing. Call (772) 577-2915 and talk to a person who knows CWS doors in Plantation.

FAQs