VLX 80 Casement Window

VLX 80 Casement Window in Plantation, FL | TruePane Windows & Doors

The VLX 80 Casement Window is a side-hinged aluminum window built around two ideas that matter in South Florida: you want to see outside without a heavy frame in the way, and you want a window that actually ventilates when the breeze picks up. This model uses ultra-narrow sightlines and a full-height opening sash to bring in more glass and more air than most sliders or fixed windows can. TruePane Windows & Doors is an authorized ViewLux installation partner in Plantation, FL, which means you get the product warranty intact, installed to manufacturer spec, and backed by a local team that knows Broward County wind and moisture conditions. Call (772) 577-2915 to talk through pricing for your home.

Call (772) 577-2915

Product Overview - VLX 80 Casement Window

Casement windows hinge at the side and open outward, which gives them one big advantage over sliders and double-hungs: when fully open, the entire glass area becomes a ventilation opening. The VLX 80 takes that idea seriously. Its profile width is just 1.97 inches, thin enough that the frame practically disappears into the wall, leaving you with glass where other windows show thick borders. That slim frame combined with a 0.079-inch wall thickness produces a window that feels light visually but is still engineered aluminum through and through.

The people buying this window in Plantation tend to fall into a few groups. Some are replacing old corroded single-pane windows in 1970s and 80s ranch homes near Plantation Acres or Jacaranda and want something that looks current without sacrificing storm performance. Others are building modern additions or renovating mid-century houses where wide glass and clean lines matter. The VLX 80 works in both worlds. It’s minimal enough for contemporary architecture, but because ViewLux offers six finish colors, it can also settle into a more traditional Florida home without looking out of place.

What makes the difference long-term is the aluminum itself. Aluminum doesn’t warp like wood in Plantation’s humidity, and it doesn’t rot. It doesn’t soften in the heat the way vinyl can. A properly installed aluminum casement will still be operating smoothly ten or fifteen years from now, which is exactly what we want for a window that sees daily use. TruePane Windows & Doors installs this product because we can stand behind it, not because it’s the cheapest option on the market. It isn’t. It’s the option for homeowners who plan to stay in the house and want the windows to last as long as they do.

Technical Specifications

Here’s what the VLX 80 Casement Window actually is, in plain numbers and options.

• Frame profile width: 1.97 inches - among the narrowest aluminum casement profiles available for residential use.
• Aluminum wall thickness: 0.079 inches - heavier than standard residential extrusions, which adds torsional rigidity and helps the sash stay square over years of use.
• Glass options: Clear, Frosted, Low-E, Tempered, and Laminated (including impact-rated laminated glass for windborne-debris regions).
• Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, and Teak Wood.
• Screen options: Fixed Screen or Retractable Screen, depending on whether you want the screen visible all the time or tucked away when the window is closed.
• Sill options: Standard Sill or Low-Profile Sill. The low-profile option sits flatter against the interior floor or window seat, which matters in modern builds where the transition from floor to glass should be minimal.
• Performance: NFRC-rated thermal break construction, AAMA 2400/2410 installation compliance, AAMA 812 foam perimeter sealing, and wind-load ratings appropriate for Broward County.

Bright colors with dark frames are selling heavily in South Florida right now, but the muted Bronze and Champagne finishes still hold their own on older Plantation homes that lean warmer in palette. If you’re not sure, we’ll bring finish samples to your house so you can see them against your exterior paint, not just on a showroom shelf.

Performance Features

Thermal Efficiency - The VLX 80 uses a thermal break that separates the interior and exterior aluminum faces. This interrupts heat transfer through the metal, which is the old knock against aluminum windows. With NFRC-rated performance and Low-E glass, you’ll feel the difference on a Plantation afternoon in August when the direct sun is on your west-facing glass.

Acoustic Performance - Aluminum with a thermal break and laminated glass reduces exterior noise more than most people expect. We have customers near University Drive, Stirling Road, and the Turnpike who specifically buy this window to cut road noise in bedrooms. Laminated glass is the single biggest upgrade for sound control.

Airtightness & Weather Seal - A casement window seals by pressing the sash against the frame when closed and locked. Unlike a slider, which rides in a track, the VLX 80 closes under compression. That gives it inherently better air-sealing than a sliding window of the same size. TruePane Windows & Doors also foams every perimeter joint with AAMA 812 low-expansion sealant to stop air leaks at the rough opening, which is where most window failures actually start.

Waterproofing - South Florida gets sideways rain. The VLX 80’s multi-point closure and the installation method we use are both built around keeping water on the outside. We follow AAMA 2400/2410 installation standards, which govern exactly how the window should be flashed, shimmed, and sealed as a complete system, not just a product dropped into a hole.

Wind Resistance - Plantation sits in a High Velocity Hurricane Zone for building code purposes. The VLX 80 Casement Window is available with impact-rated laminated glass that meets local wind-load requirements. A casement’s hardware also helps here: the multi-point locking system holds the sash tight to the frame from top to bottom, which resists deflection far better than a center latch on a slider.

Security & Hardware - The multi-point lock engages at several positions along the jamb, not one. That makes the window much harder to pry from outside. Tempered glass, where code requires it near doors or low sills, adds another layer of protection. Good hardware on a well-installed frame makes this a window that will frustrate an intruder long enough for them to move along.

Color & Glass Options

ViewLux finishes the VLX 80 in six stock colors. Premium Black is the current favorite in Plantation for modern and transitional homes; it frames the view aggressively and hides window screen shadows. Pure White is the safe pick for traditional stucco homes and will match white soffits and fascia without effort. Anodized Silver reads commercial and crisp, which works on contemporary builds and some mid-century houses. Bronze and Champagne are warmer, lower-contrast choices that blend well with beige and terracotta exteriors common in older Plantation neighborhoods. Teak Wood is a wood-grain finish for people who want the look of wood without the maintenance of it.

Glass is not one-size-fits-all. Clear is fine for areas where the view matters more than anything else. Frosted works in bathrooms and side yards where privacy counts. Low-E is our default recommendation for any Plantation home; the coating cuts heat gain in summer and protects furniture from UV fading. Tempered is required by code in certain locations and adds safety. Laminated glass is the big one for South Florida: it holds together when struck, and the impact-rated version is what you need if your home is in a windborne-debris zone. Ask us which combination makes sense for the specific room and elevation, because the answer is usually different for a west-facing bedroom than for a shaded front porch window.

Installation by TruePane Windows & Doors in Plantation

Here’s the thing about aluminum casement windows: a great product installed badly will still leak, stick, and eventually fail. And when we say fail, we don’t just mean it’s annoying. A poorly flashed window in Plantation will let water into your wall cavity, and you won’t see it until the stucco starts staining or the drywall swells. That’s why we’d rather lose a bid than cut a corner on the install.

We start every VLX 80 Casement Window job with a pre-install inspection of the opening. We’re checking the rough opening dimensions, the condition of the existing framing, and whether there’s any hidden rot or termite damage behind the old window. Broward County’s humidity means older wood framing sometimes looks fine from the outside and isn’t. We find that before we order glass, not after.

On install day, the window is set level, plumb, and square. We don’t rely on shims to force a window into a bad opening; we fix the opening first if it’s out of tolerance. The sash is adjusted to the frame so it closes square and seals evenly across all four sides. Then the perimeter gets AAMA 812 low-expansion foam sealant. After that, the exterior flashing and caulk work goes in, and we run water tests on the lower corners before the interior trim is finished. Every install follows AAMA 2400/2410 standards, which keeps your ViewLux manufacturer warranty intact.

An installation done this way takes a little longer. Most homeowners in Plantation never know the difference, because you can’t see it from the curb. But in three years, when hurricane season rolls through again and the windows are still dry, you’ll know.

Frequently Asked Questions - VLX 80 Casement Window

Get a Quote - VLX 80 Casement Window in Plantation

Replacing windows in Plantation is a real investment, and you should know exactly what it costs before you commit. TruePane Windows & Doors gives you a free, on-site measurement and a written line-item quote for the VLX 80 Casement Window, including glass, finish, screens, and installation. No change orders down the line. Call (772) 577-2915 to schedule your estimate and talk to a real person in Plantation, FL who knows this product cold.

Written by Clint Anderson, Owner at TruePane Windows & Doors, serving Plantation, FL since 2013.