Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTrusted Window Installation for Plantation Homeowners
Plantation Window Installation typically runs $450 to $1,400 per window for full-frame replacement, depending on size, material, and whether you’re doing a pocket install or opening up the wall. Most standard installs are completed in a single day with a crew of two to three. We’ve done this work across Plantation since 2008, and the calls we get still follow the same pattern: a homeowner notices a draft, a fogged seal, or a frame that’s pulling away, and they want to know what it’ll cost and whether the company will still be around to honor the work. We will. Call (772) 577-2915 and a live person answers.
Dale Kessler founded TruePane Windows & Doors because he kept seeing the same two failures in this trade: out-of-true installs that voided manufacturer warranties, and vague paperwork that left homeowners holding nothing. The Keystone Standard was his answer. Both warranty layers get registered in writing before our truck leaves your driveway. If the pane is not true, the job is not done.
Every installer who walks through your door is background-checked, uniformed, and trained to measure every opening twice before ordering a single unit. No subcontractor roulette. No surprise line items at the end of the bill. Just a square deal and a Done Right Promise that means what it says.
What Our Window Installation Service Includes
We install every type of residential window used in Broward County, including impact-rated units for hurricane season and high-efficiency glass for the Florida sun, offering Best Window Installation in Plantation, FL. Each opening gets measured twice, the surrounding frame gets inspected for rot or settling, and the finished unit gets flashed, leveled, squared, and sealed to keep water and air where they belong. Here’s what we handle under one roof:
Casement Windows
Casements hinge at the side and crank outward, which makes them the tightest-sealing operable window made. In Plantation’s humidity and afternoon storms, that seal is what keeps AC bills predictable and wall sills dry. TruePane installs casements from Andersen, Pella, and Marvin, sets each hinge and locking point to manufacturer spec, and registers the hardware warranty the same day.
Awning Windows
Awning windows hinge at the top and push out from the bottom, so they can stay open during light rain without soaking the inside sill. They’re common over kitchen sinks and in bathrooms where ventilation matters and wall space is tight. We install them with proper flashing and through-the-frame fastening so the South Florida wind load doesn’t flex the frame over time.
Fixed & Picture Windows
Fixed windows don’t open, but they deliver the most glass area and the best thermal performance for the price. Picture windows in Plantation living rooms usually face west or east, which means they take direct sun for hours. We specify low-E glass with the right solar heat gain coefficient for each exposure, rather than putting the same glass in every opening.
Single & Double Hung
Double hung windows tilt in for cleaning and ventilate from both the top and bottom sash. They’re the closest match to the original windows in older Plantation neighborhoods like Plantation Isles and Jacaranda, which makes them a common choice for whole-home replacements. We set the balances and weatherstripping so both sashes hold position without stickiness or drift.
Sliding Windows
Sliders work exactly how they sound: one sash slides past another on a track. In Florida, the failure point with slider windows is almost always the track and rollers, which collect dust and lose smooth travel over years. We install sliders with upgraded heavy-duty rollers and ensure the drainage channels are cut correctly so water exits the frame instead of pooling inside it.
Bay & Bow Windows
Bay and bow windows project outward from the wall, which means the structural load path matters as much as the glass. A poorly supported bay window will sag and pull the frame out of square, and every manufacturer we work with has a documented support requirement for cantilevered projections. We build and brace the projection to those requirements, then finish the exterior so the scupper and cap flashing shed water properly.
We also install garden and basement windows, glass block, fully custom openings, and trim packages to match the home’s existing exterior. Any opening in your Plantation home that holds glass, we can set it true.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Window Installation
We’re an authorized installer for, which means our installers train on each line’s current frame design and hardware before they ever touch a job. It also means we register both warranty layers with the manufacturer directly, in writing, before we leave your property. That registration is the difference between a warranty that pays out and a warranty that gets denied for paperwork gaps.
Andersen’s wood-clad frames are common in Plantation’s higher-end homes and need careful flashing at the sill and head to prevent water intrusion behind the cladding. Pella’s vinyl and wood lines each have different shim and anchor specs, and we quote them side by side on paper so you see the actual difference in materials and price. Marvin and Milgard units are built for coastal climate conditions, which suits Plantation’s exposure to afternoon storms and high humidity. Whether you have one of those names or any other make, we can install it and stand behind the work.
Signs You Need Window Installation Right Now
- Fogged glass between the panes. This means the sealed insulating glass unit has failed. The inert gas has leaked out and moisture has entered the cavity, so the window no longer insulates. The fix is a new IGU or a new window, not a wiping-down.
- Drafts you can feel without touching the glass. Run your hand along the frame edges on a breezy day. If you feel air movement, the weatherstripping is compressed, the frame is out of square, or the caulk has pulled away. All three get worse through Plantation’s summer thunderstorm cycle.
- Sashes that stick or bind. When a window binds in July, it’s usually a sign the frame has moved or the sash is no longer square in the track. Forcing it open and shut accelerates wear on the hardware and can crack the glass at the corners.
- Condensation between the frame and the wall. Moisture on the interior wall around the window, peeling paint at the sill, or soft drywall below the opening all point to water getting behind the frame. That water is already working on the framing. Put off the install and you’ll be budgeting for carpentry alongside the glass.
- Windows older than 20 years without impact rating. Plantation sits in a high-velocity hurricane zone, and windows that predate impact standards offer little resistance to flying debris. Even if the frames look fine, the age means failed seals, lost gas fill, and no protection when a storm pushes through Broward County.
Our Window Installation Process - Step by Step
- 1
Measurement and opening inspection. Every opening gets measured in three places: top, center, and bottom. We check the rough opening for square, look for rot at the sill and jamb, and document what we find. If the framing is compromised, we tell you before quoting so the estimate matches the actual job.
- 2
Side-by-side quote on paper. We show you the final cost per opening, the line item for materials, the line item for labor, and the warranty terms for each manufacturer we’re quoting. You see exactly what you’re buying and what it’ll cost, and the number we quote is the number on the bill.
- 3
Order and double-check. We order the units with the correct glass package, frame finish, and hardware. Before installation day, we verify the order against the measurements. If a manufacturer ships wrong, we catch it before the truck pulls up and you waste a day.
- 4
Installation. The old window comes out, the opening gets mechanically fastened to the surrounding frame, the new unit goes in level and square, and we flash, seal, and cap it. Every unit is set to the manufacturer’s published installation method. Sloppy corners and missing backer rod are the cause of most callbacks, and we don’t allow them.
- 5
Cleanup and warranty registration. We dispose of the old windows, vacuum the work area, and register both warranty layers in writing while still on site. You get a copy, we keep a copy, and the manufacturer has a record. The Done Right Promise covers everything else, no fine print.
How Much Does Window Installation Cost in Plantation?
A standard single-hung replacement in Plantation runs $450 to $800 installed for Affordable Window Installation in Plantation, FL, depending on size and frame material. Sliding windows run $600 to $1,100. Casements and awnings cost a bit more per window, typically $700 to $1,300, because of the hardware and tighter tolerances. Bay and bow windows are a different animal altogether, usually starting around $2,500 and climbing based on projection depth and what’s happening with the framing below.
The price moves with a few things: whether the opening needs carpentry repair, whether you’re replacing one window or doing a whole-home job, the glass package (impact-rated, low-E, gas-filled), and the manufacturer. Don’t overpay by skipping the details. A bid that doesn’t specify the glass package, the warranty registration, or the flashing method is a bid that’s hiding cost in the corners. Our free estimate includes a written line-item quote so you know precisely what you’re paying for before we ever pick up a tool. Call (772) 577-2915 and we’ll schedule it.
Window Installation Near Plantation - Our Service Area
TruePane installs windows throughout Broward County, with regular work in Plantation, Lauderhill, Lauderdale Lakes, Sunrise, Davie, Tamarac, and Fort Lauderdale. Homeowners in North Lauderdale, Oakland Park, Wilton Manors, Cooper City, and Dania Beach call us too, and we’re typically on site within a day or two of the estimate. We also provide Window Installation in Lauderhill and Window Installation in Lauderdale Lakes, with the same Keystone Standard on every job. If you’re not sure whether we cover your address, call and ask.
Serving Plantation, FL - Our Local Coverage Area
We’re based in the Plantation area and know this community well, and we also provide Window Installation in Fort Lauderdale. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Window Installation in Plantation
Window installation is the process of removing an old window and installing a new one into the framed opening in your home’s wall. It includes measurement, flashing, sealing, fastening, and interior/exterior trim work. The quality of the installation determines whether the window performs to its rated energy and water-resistance specifications or fails within a few years. That’s why we register the manufacturer’s warranty and our Done Right Promise on every job in Plantation.
A standard single-window replacement takes about two to three hours on site. A full home of ten to fifteen windows is typically completed in one to two working days, depending on what we find once the old windows come out. Bay or bow windows and openings that need carpentry repair add time. We’ll give you a firm schedule before the work starts and we’ll be there when we say. Call (772) 577-2915 for a timeline on your specific job.
Most windows in Plantation cost between $450 and $1,400 to install, with bay and bow units and custom sizes running higher. The final price depends on the window size, frame material, glass package, and whether the rough opening needs repair. We quote the entire job up front in a written line-item estimate, so the price doesn’t change once the work starts. Estimates are free.
Yes, we’re an authorized installer for and many other lines, including. Our installers are trained on each manufacturer’s current frame and hardware design, and we register both warranty layers with the manufacturer on the day of the install. If you have an existing Andersen window or want to switch to Andersen, we can quote it side by side against comparable options so you can compare the real cost.
We keep a live person on the phone 24 hours a day, seven days a week, so if you have a broken pane or a window that can’t be secured, you’re talking to a human, not a phone tree. While we don’t promise fast, scheduled installation, we move quickly for homeowners with an opening that’s open to the weather or unsecured. Call us and we’ll give you an honest answer about when we can get there.
We stand behind the work two ways. The manufacturer’s warranty covers materials and glass, and we register both layers in writing before we leave the property. Our own Done Right Promise covers the workmanship: if something isn’t right, we make it right, no paperwork fight and no argument. Both are stated plainly in writing because that’s the only kind of warranty worth having.
Clear the area around each window, inside and outside, about four feet back. Move furniture away from the openings, take down window treatments, and clear a path from the entry door to each work area. Our crew handles all floor protection, debris removal, and cleanup, so the home is left clean at the end of each day. If you have exterior landscaping or screens in the way, we’ll work around them or carefully move what needs to move.
Schedule Your Window Installation Service in Plantation Today
If you’re tired of drafts, fogged glass, or windows that fight you every time you open them, call TruePane Windows & Doors at (772) 577-2915. We’ll set up a free estimate with a written line-item quote, and you’ll get our Done Right Promise on every window we install. A live person answers 24/7, and we’ll be there when we say. Done right.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Plantation and Broward County since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.