Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Energy-Efficient Windows in Plantation: What to Know First
TruePane Windows & Doors provides independent CGI energy-efficient window service and replacement in Plantation, FL. Most CGI repair jobs are completed in a single visit, and a full replacement typically runs five to ten business days from signed quote to finished install. Our pricing is not the lowest in Plantation, and we don’t pretend otherwise. What we offer is a written, line-item quote before any work starts, both warranty layers registered on paper, and a Done Right Promise that means exactly what it says.
This page is for Plantation homeowners who already own CGI windows, or who are pricing CGI for a home built in the last twenty years, and want straight answers about energy performance, known failure points, and what a proper repair or replacement actually costs in this market. If that’s you, call (772) 577-2915 and a live person will answer.
How CGI Products Fail - and How We Fix Them
CGI builds a solid window. But any product that sits in South Florida sun, salt air, and hurricane-season humidity for ten or fifteen years will eventually show its age. Here’s what we actually see in Plantation homes, and what we do about it:
- Insulated glass seal failure on older CGI Estate and CGI Classic series. The first sign is fog or condensation between the panes that won’t wipe off. The desiccant inside the spacer gets saturated after years of thermal cycling, and once moisture is trapped, the Low-E coating starts to degrade. We replace the insulated glass unit, not the whole window, whenever the frame is still square and sound.
- Low-E coating breakdown on west and south-facing windows. Plantation sun is direct and hard on coated glass. When the metallic Low-E layer begins to oxidize, the glass takes on a hazy, blue-gray cast you can’t clean off. We re-glaze with the correct matching Low-E or solar-control glass configured for the window’s exposure, not a one-size-fits-all replacement lite.
- Frame gasket compression on CGI vinyl lines. After a decade of heat, the weatherseals compress and lose memory. The symptom is warm air at the sill in August and slightly higher electric bills than your neighbor with the same floor plan. We replace the gaskets and re-tension the sash so it seats properly against the seal.
- Argon gas loss without visible seal failure. An energy audit sometimes shows a window that looks fine but underperforms. The argon has leaked through a pinhole in the seal, and the gap is now just dead air. We can test for gas fill during a site visit and tell you honestly whether replacement of the IGU is justified by the energy math.
- Nail flange and flashing failures at original install. A CGI window is only as good as its rough opening. We regularly find original installs where the flange was under-driven or the sill flashing was taped over but never lapped correctly. The window itself worked fine; the install let water run behind it. We pull the trim, correct the flashing, and reset the window properly.
Our CGI Energy-Efficient Windows Process
Every CGI job we run follows the same steps, whether it’s a single IGU on a second-floor bedroom or a full-house replacement:
- 1
The call. You reach a person, not a menu. We ask what you’re seeing, what year the windows went in, and what part of Plantation you’re in.
- 2
Measurement and diagnosis. A uniformed technician arrives on time, measures every opening twice, and tests the existing units for gas fill, seal integrity, and frame square. You’ll get a plain-language explanation of what’s actually wrong.
- 3
Written quote. We put the parts decision on paper: OEM CGI components where they matter, quality aftermarket glass when it’s the better value for the same spec. No verbal ballparks, no second visit surprises.
- 4
Parts and prep. We order and stage everything before we schedule the install day. You’ll know what we’re bringing and when we’re coming.
- 5
Install and test. We set the unit, shim for true, check plumb and level at every step, then test for air movement with a smoke pencil and confirm the sash cycles cleanly.
- 6
Cleanup and paperwork. We sweep and remove all debris, register both manufacturer warranty layers in writing before the truck leaves your driveway, and walk you through what was done and why.
What CGI Energy-Efficient Windows Costs in Plantation
Here’s what Plantation homeowners should expect to pay for common CGI energy-efficient window work:
- Insulated glass unit replacement (single window): $285-$520 depending on size and glass spec
- Low-E or solar-control re-glaze with argon fill: $340-$600 per lite
- Full CGI window replacement (standard size, energy package): $850-$1,400 per opening installed
- Window energy audit with gas-fill testing: $89 as a maintenance visit, credited back if we do the repair
What moves the price is glass spec, sash size, and whether the original flashing needs correction. Triple-pane adds cost and is rarely worth it at Plantation’s latitude; double-pane with Low-E and argon is the better value for most homes. Call (772) 577-2915 for a free written estimate on your specific windows.
Why Plantation Homeowners Call TruePane Windows & Doors for CGI Work
Dale Kessler grew up off Broward Boulevard, learned glazing at McFatter Technical College in Davie, and has spent over two decades setting windows across Broward County. We hire local, train apprentices into journeymen, and send background-checked techs who measure twice and leave the opening cleaner than they found it. If the pane is not true, the job is not done.
We’re an independent CGI service provider, not an authorized dealer. That matters because nobody is steering you toward a replacement when a repair is the square call. We carry more than a dozen manufacturer lines, including Andersen, Pella, and PGT, so if CGI isn’t the right answer for your house, we’ll tell you that in writing.
FAQs
As an independent CGI service provider, we follow warranty-safe practices that preserve any remaining coverage where it applies. We register both manufacturer warranty layers in writing and walk you through what’s covered before anyone touches the window. Call (772) 577-2915 to have us look up your specific series and warranty dates.
Fogged glass, hazy coatings, and drifting sashes usually point to repair. A racked frame, failed flashing, or windows that won’t meet current energy code point to replacement. We’ll test and tell you straight, with a written quote either way.
Yes. We match the original Low-E and solar-control configuration using the window’s NFRC label or series documentation, and we re-glaze to the same spec so the replacement lite doesn’t stand out from its neighbors.
Most insulated glass units are ready in a week to ten days. Stock parts are faster. We don’t schedule the install until every component is in hand, so you won’t have a window out of its opening waiting on a backorder.
Yes. When the job requires a permit, we pull it and schedule the inspection. We don’t skip the paperwork, and we don’t call the job done until it passes.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Plantation and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.