Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCWS Custom & Geometric Windows in Plantation: What to Know First
CWS custom and geometric windows in Plantation can be repaired, re-glazed, or replaced by an independent service provider without voiding the manufacturer warranty, so long as the work is done to Florida Product Approval standards and documented in writing. Typical turnaround for a custom CWS unit, including fabrication of a non-standard arch or radius top, runs three to six weeks depending on glass availability and the complexity of the shape. Most repairs we quote fall between $275 and $900, while full custom replacements generally start around $1,400 per opening and climb from there based on geometry and impact rating. This page is written for Plantation homeowners who own CWS windows and want straight answers on what fails, what it costs, and who can fix it. Call (772) 577-2915 and a live person answers, day or night.
We are TruePane Windows & Doors. Our team has been setting windows in Broward County homes since 2008, and we work on CWS units regularly, including custom impact windows, geometric and shaped windows, arched and curved windows, and oversized openings. We are an independent CWS service provider, which means we have no quota to sell you a specific product line. Our job is to get your window right.
How CWS Products Fail - and How We Fix Them
CWS builds a solid window, but every manufacturer has patterns. After years of working on their units in Plantation, here are the failure modes we see most often on custom and geometric CWS windows:
- Radius-top seal failure on CWS arched windows. Arched and half-round units put constant stress on the seal at the apex of the curve. In Plantation’s wet season, a failed seal draws moisture into the insulated glass unit and leaves fog between the panes. We order a replacement IGU cut to the exact radius of the existing sash, install it with fresh setting blocks, and the fog does not come back.
- Warped or bowed frames on oversized CWS picture windows. CWS makes large fixed units that look clean on a wall, but Plantation’s summer heat can cause aluminum frames on south-facing elevations to bow if the original installer skipped the shim step or set the frame against an out-of-plumb rough opening. We pull the trim, re-shim the frame square, and reset the unit. If the frame itself is compromised, we quote a replacement that carries the same geometric profile.
- Failing corner welds on CWS geometric shapes, especially trapezoids and pentagons. Non-rectangular windows concentrate stress at their narrowest points. CWS welds the corners on their custom shapes, but over decades those welds can micro-crack from thermal cycling. The symptom is a draft you cannot pinpoint and a sash that sits slightly off in the frame. Dale Kessler has rebuilt more of these than he can count since his days at McFatter Technical College, and the fix is a re-weld plus refinish, or a new custom sash if the alloy has fatigued past safe service.
- CWS roller and track wear on large sliding geometric units. Oversized custom sliders, especially those CWS built in the 1990s and early 2000s, use rollers with nylon wheels that flatten over time in Plantation’s sandy air. The door or window gets harder to slide, then starts grinding. We replace the rollers with OEM or better-quality aftermarket units, clean and re-align the track, and the panel slides the way it did when it was new.
- Blown impact glass on CWS impact-rated custom windows after a storm or impact. An impact-rated unit can absorb a hit without shattering, but the inner laminate may delaminate or the IGU seal may blow. You will see a starburst crack or persistent fog. We order CWS-compatible impact glass with matching Florida Product Approval documentation and set it correctly so the opening stays protected.
None of these are “replace the whole wall” situations unless the frame is structurally done. Most CWS custom window problems are repairable by a technician who actually knows the brand, not a general handyman who has never touched a radius IGU.
Our CWS Custom & Geometric Windows Process
We keep the process simple, because a homeowner should always know what happens next:
- 1
You call, a person answers. A live person picks up the phone at (772) 577-2915, day or night. No voicemail tree, no call center. We ask what the window is doing, when it started, and whether it is a CWS unit.
- 2
We measure twice. A background-checked, uniformed TruePane technician comes to your Plantation home and measures every opening twice, by hand and with digital verification. For geometric shapes, we trace the exact profile instead of guessing from a standard cut sheet.
- 3
We put your options on paper, side by side. If a replacement is needed, we quote OEM CWS parts where available, along with quality aftermarket options from lines we trust, and we write down the difference on paper so you see exactly what you are buying. We do not register warranties on windows we have not installed, but on every TruePane job, both manufacturer warranty layers are registered in writing before our truck leaves your driveway.
- 4
The repair or replacement. For repairs, most jobs are done in a single visit. For full custom replacement units, we coordinate the fabrication, handle the Florida Product Approval paperwork, and set the window when it arrives.
- 5
We test and we finish. We open and close every operable unit, check the seal line, run a water test on exterior perimeters, and clean the glass and frame. If it is not square, level, and in writing, it is not done.
- 6
The Done Right Promise. Every TruePane job, CWS or otherwise, carries our Done Right Promise. If something is not right, we come back and make it right. No paperwork fights, no arguing.
What CWS Custom & Geometric Windows Costs in Plantation
We are not the cheapest bid in Plantation, and we do not try to be. What we charge is a square deal, which means the price we quote is the price you pay. Here is what CWS work typically runs in this market:
- IGU replacement for a standard CWS rectangular unit: $275-$600, depending on size and whether it is impact-rated.
- IGU replacement for a CWS arched or radius-top unit: $450-$900, driven by the custom radius and glass type.
- Roller and track rebuild on a CWS oversized slider: $200-$450 per panel, including parts and alignment.
- Corner re-weld and refinish on a CWS geometric sash: $350-$800, depending on the alloy condition and shape complexity.
- Full custom CWS replacement window, geometric or arched: $1,400-$4,800 per opening, depending on size, shape, glass package, and impact requirements.
What moves the price most is the geometry of the glass, the impact rating, and whether the original rough opening needs correction. A pentagon or trapezoid always costs more than a rectangle of comparable size because the glass is cut and tempered to a non-standard shape. Call (772) 577-2915 for a free estimate. We will give you a written line-item quote before any work is scheduled.
Why Plantation Homeowners Call TruePane Windows & Doors for CWS Work
The homeowners who call us have usually already been through one bad install or one unregistered warranty. They are not looking for a franchise truck that rolls in and rolls out. We have been setting windows in Broward County since 2008, and our founder Dale Kessler grew up off Broward Boulevard in Plantation, so when customers ask whether we will still be around in ten years, the answer is not a guess. It is the plan. Our techs are background-checked and uniformed, and they treat a customer’s home the way they would treat their own mother’s. We also carry the multi-brand backup: if a CWS unit is beyond repair and a different manufacturer’s line fits the home better, we are authorized installers for PGT, CGI, ES Windows, and ECO Window Systems, among more than a dozen others, and we will put the comparison on paper without a sales pitch. The Keystone Standard means both warranty layers are registered in writing, durations stated, before the truck leaves the driveway. If the pane is not true, the job is not done.
FAQs
No. Repairs performed by an independent provider do not void your CWS warranty, provided the work does not alter the original frame or void the installation integrity the warranty assumes. We document every job and use CWS-compatible parts, so you keep your coverage and get the repair done right. Call (772) 577-2915 if you want us to walk through what your specific warranty says before we start.
Most can be repaired. Fogged glass, worn rollers, failing corner welds, and minor frame alignment issues on CWS geometric windows are all repairable by a technician who knows the brand. Replacement only becomes necessary when the frame itself is structurally compromised. We will tell you which one you have after we measure and inspect.
Most repairs we complete in a single visit, usually two to four hours on site. If glass needs to be fabricated to a custom radius or non-standard shape, that adds lead time from the glass supplier, typically one to three weeks. We set expectations in writing before we schedule anything.
Yes. We install, repair, and replace CWS impact-rated custom windows, including arched and geometric units. We handle the Florida Product Approval documentation and make sure the glass package matches the original impact specs. Call (772) 577-2915 for a free estimate.
No. We quote fixed pricing on every job, no surprise line items, no change orders unless we find something behind the wall that changes the scope and you approve it in writing first. A square deal means the number we give you is the number you pay.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Plantation and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.