Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCWS Windows & Doors in Lauderdale Lakes, FL | TruePane Windows & Doors
We provide independent CWS windows & doors service across Lauderdale Lakes, from single-unit condo replacements to whole-building impact packages. The thing that separates our CWS work here from anywhere else? We know these 1960s CBS garden condos and their original jalousie openings better than anyone, and we know what CWS hardware fails first under Broward County humidity. TruePane Windows & Doors is an independent service provider, not a CWS affiliate or authorized dealer. Call (772) 577-2915 for a free estimate.
Why Lauderdale Lakes Residents Choose Us for CWS Service
Most window companies in Lauderdale Lakes know how to install a new unit. Fewer know what to do when a CWS 6200 slider fails five years in and the condo board wants paperwork before anything gets touched. We’ve been working these buildings since Dale Kessler founded TruePane in 2008, and before that, Dale spent two decades on our Window Installation in Lauderdale Lakes and across Broward County, from 1960s ranch homes to impact-rated new construction. He grew up off Broward Boulevard in Plantation and learned the trade at McFatter Technical College in Davie, which gives us a particular advantage when it comes to the tight-tolerance installs that CWS impact lines demand. Our technicians arrive background-checked and uniformed, measure every opening twice, and quote manufacturer lines side by side on paper. The Done Right Promise covers every CWS repair and replacement we do, and both warranty layers get registered in writing before our truck leaves your driveway.
Common CWS Windows & Doors Problems We Solve in Lauderdale Lakes
Here are the CWS failure modes we see most often in Lauderdale Lakes, tied to the conditions that cause them:
- Deteriorating jamb gaskets and weatherstripping on CWS single hung units. The high humidity and standing water around Lauderdale Lakes’s low-lying drainage areas accelerate gasket shrinkage. Water intrusion during afternoon downpours is almost always a gasket that’s turned brittle.
- Corrosion pitting at sill corners and screw bosses on CWS 6200 Series sliders. Salt-laden humidity meets uncoated aluminum edges, and the result is pitting that freezes screws and compromises the frame. Ground-floor units near the Everglades drainage corridor get hit worst.
- Water intrusion at the mullion junction on older CWS impact casements. The junction seal degrades in our climate, letting water behind the frame where it causes concealed stucco damage. You won’t see it until the stucco starts staining.
- Failed glazing beads or gasket extrusion on CWS picture windows. We regularly find previous contractor repairs where the wrong glazing bead was used. The result is visible fogging or moisture between panes, which under Broward’s HVHZ code often triggers a failed inspection.
- Binding and misalignment on CWS Estate Series impact doors in corrosive environments. CBS construction with masonry anchoring tends to shift slightly over decades. Frames that were installed without proper shimming bind in July humidity, and the door won’t close square.
Every one of these is repairable when caught early. Some require full replacement when corrosion has eaten too far into the frame. We’ll tell you straight which is which.
CWS Service in Lauderdale Lakes: What Local Conditions Mean for Your Equipment
If you own a CWS window or our Door Installation in Lauderdale Lakes product, you likely bought it because your insurance company told you to. Lauderdale Lakes is dominated by CBS garden condos and single-family homes built between 1960 and 1980, many still carrying original jalousie louvered openings or early single-pane aluminum sliders. Those products are disqualifying under Broward County’s High Velocity Hurricane Zone code and under the underwriting guidelines of insurers actively non-renewing Florida policies. Every replacement window and exterior door here must carry a Miami-Dade Notice of Acceptance or Florida Product Approval. The primary driver isn’t aesthetics; it’s retaining coverage. That pressure changes how we approach CWS service. In the quiet Oakland Estates section of Lauderdale Lakes, our crew pulled a badly corroded CWS 6200 slider from a ground-floor CBS unit. The original jamb gaskets had shrunk into brittle shards and the sill screws were frozen in salt-pitted aluminum. We replaced the entire frame with a new HVHZ-rated CWS impact slider, repaired the stucco reveals, and left the owner with paperwork ready for their wind mitigation inspection. That’s the standard we bring to every CWS job here.
CWS Models & Products We Service in Lauderdale Lakes
We work on the full CWS impact-rated lineup: the 6200/7200 Series Aluminum Impact Windows, the 900 Series Single Hung and Sliding Windows, the Genesis Awning/Casement Lines, and the Estate Series Aluminum Impact Doors. We also handle hurricane shutters, wind mitigation documentation, and code compliance work for existing CWS installations. For critical weather seals, balance systems, and impact-rated glass lites, we use genuine CWS factory parts, because those components must maintain NOA compliance. For non-structural hardware, we’ll use aftermarket only when it matches or exceeds the original spec and doesn’t compromise function. If a CWS frame is too corroded to repair safely, we’ll recommend full replacement before any patch job, because a patch that fails during a storm is a warranty claim nobody wants. CWS sales & service is what we do, and we stock the most common parts locally to keep turnaround fast for Lauderdale Lakes customers.
CWS Service Pricing in Lauderdale Lakes
Service call and diagnostic visits in Lauderdale Lakes typically run $85 to $150 depending on access and the complexity of the CWS unit. Replacing deteriorated jamb gaskets and weatherstripping on a CWS single hung usually falls between $120 and $280 per window. A failed glazing bead or gasket extrusion repair on a CWS picture window averages $180 to $350. Full replacement of a corroded CWS 6200 slider frame with a new HVHZ-rated impact unit starts around $1,800 to $3,200 installed, depending on size, stucco repair, and masonry anchoring. What drives cost here is the CBS construction method and any building-wide approval requirements from your condo board. We offer a free written repair estimate and a maintenance check, plus a permanent 5% discount for seniors and veterans. A free estimate includes a written, line-item quote and a straight answer about whether repair or replacement makes more sense. Call (772) 577-2915 for an exact quote, because no two CWS frames in this city age quite the same way.
Serving Lauderdale Lakes, FL - Our Local Coverage Area
We’re based in the Lauderdale Lakes area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CWS Windows & Doors in Lauderdale Lakes
Only if the specific CWS product carries a Miami-Dade Notice of Acceptance or Florida Product Approval and the installation follows the approved anchoring and fastening schedule. We verify the NOA paperwork before any replacement work begins in Lauderdale Lakes, because your insurer will ask for it during a wind mitigation inspection. Call (772) 577-2915 and we’ll walk you through the approval for your specific CWS product.
Yes, in many cases the failed glazing bead or gasket extrusion can be replaced and the insulated glass unit reset, so long as the frame itself is sound. If the previous contractor used the wrong bead and the seal has broken down, we replace the bead with a CWS factory part and reintroduce a proper seal. If the frame is corroded beyond safe repair, we’ll tell you that replacing the full unit is the only honest option.
Yes, and this is one of the most frustrating realities of CWS work in Lauderdale Lakes. Many of the 1960s and 1970s garden condo associations require uniform product approvals across the entire building before any single unit can modify exterior windows or doors. That means a one-window job can stall until the board negotiates a building-wide CWS impact package. We’ve been through this process enough times to help owners and boards get to a contract that satisfies Broward’s HVHZ code without stalling individual units indefinitely.
The standing water and high humidity near Lauderdale Lakes’s drainage corridor accelerate gasket shrinkage, corrosion pitting at sill corners, and water intrusion at mullion junctions on CWS impact casements. Ground-floor units are hit hardest because moisture wicks up from the slab and sits against the frame bottoms. We see pitted screw bosses on CWS 6200 sliders here faster than in inland communities like Coral Springs, which is why regular inspection matters. Call (772) 577-2915 if you’re noticing staining or drafts near your CWS frame.
In many cases, yes, CWS hurricane shutters can be installed over existing non-impact windows and still satisfy the wind protection requirements for insurance purposes, provided the shutter system carries the proper Miami-Dade NOA or Florida Product Approval. However, if your windows are original jalousie or single-pane aluminum from the 1960s or 1970s, shutters will not solve the water intrusion, corrosion, and seal failure problems those windows have. We’ll quote you both options side by side so you can see the real cost difference before deciding.
Service Areas Near Lauderdale Lakes
TruePane Windows & Doors provides CWS service throughout Lauderdale Lakes service area and the surrounding Broward communities. We regularly work in Plantation, Lauderhill, Sunrise, Davie, and Tamarac. If you’re in a neighboring city and need CWS work done, CWS service in Plantation and CWS service in Lauderhill are both within our regular coverage area, and we’ll be there on the day we say.
Book Your CWS Service in Lauderdale Lakes Today
If your CWS window is leaking, binding, or fogging between the panes, call us at (772) 577-2915 to schedule a free estimate. We’ll measure twice, quote CWS lines side by side on paper, and register every warranty layer in writing before we leave the driveway. If it is not square, level, and in writing, it is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Lauderdale Lakes since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.