Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterES Windows Roof Repair in Plantation: What to Know First
We repair ES Windows skylight and roof-glazing installations throughout Plantation, and most jobs are completed in a single visit once parts are on hand. ES Windows builds a high-end aluminum and glass product line, but roof-mounted glass doesn’t fail because of the glass itself, it fails because of the flashing, the sealant, and the way the curb was originally set. If you own a home here and water is getting in around an ES Windows roof unit, call (772) 577-2915 and we’ll walk you through what we’re seeing before we ever quote a number.
This page is written for the Plantation homeowner who’s had the roof leak fixed twice and is starting to suspect the skylight was never the problem, it was the installation around it. We’re an independent ES Windows service provider, which means we can be honest about what we find without a manufacturer looking over our shoulder.
Key Takeaways
- ES Windows roof glazing leaks in Plantation are usually flashing or sealant failures, not glass failures.
- We match ES Windows framing tolerances exactly, using OEM gaskets and glazing when available, and we tell you in writing when we use quality aftermarket parts instead.
- Our Done Right Promise applies to every ES Windows roof repair we do, and both warranty layers are registered in writing before we leave.
- We serve all of Plantation, including Plantation Acres, Jacaranda, and neighborhoods off Broward Boulevard, with a live person answering the phone 24 hours a day.
How ES Windows Products Fail - and How We Fix Them
ES Windows manufactures some of the truest thin-line aluminum frames in the industry, and their roof glazing units are no exception. The weak point on a roof installation isn’t the frame, it’s the marriage between the frame and the roof deck. Here’s what we see on Plantation homes and what we do about it.
- ES Windows ES70 fixed roof glazing with elevated curb leaks. The ES70 series is common on flat-roof Plantation additions and patio overhangs. When the curb was framed even slightly out of level, the ES70’s weep system channels water into the frame corners instead of out through the weeps. We reset the curb, relevel the glazing, and replace the corner gaskets, since a gasket that’s been sitting in standing water in a Plantation summer has maybe three years of life left.
- ES Windows ES45 operable roof vents that bind before they seal. The ES45’s narrow stile profile means the operator arms carry more load than they look like they can. In humid Broward County air, the arms oxidize, the vent panels settle, and the seal compresses on one corner while lifting on the opposite. We replace the operator hardware, reset the panel in its frame, and adjust the strike points so the seal seats evenly before the mechanism is asked to do any work.
- ES Windows curtain-wall roof sections with failing perimeter sealant. These are the big fixed panels that run across a roofline. The original installer’s sealant choice matters more than the manufacturer’s glass. Poor-quality or mis-primed sealant pulls away from the aluminum after a few South Florida expansion cycles, and the leak appears miles from the opening. We remove the old bead, prep the aluminum properly with a two-part primer, and lay in a marine-grade sealant rated for aluminum-to-concrete and aluminum-to-tile transitions.
- ES Windows ES100 roof monitor sections with internal condensation between panes. The ES100 is a heavier thermal-glazed unit sometimes used in roof monitor runs. Plantation homeowners call us thinking the seal failed, and half the time they’re right, but the other half it’s a missing thermal break at the curb connection that’s letting interior moist air condense inside the cavity. We inspect the curb-to-frame connection before ordering glass, because replacing an ES100 insulated unit and leaving the uninsulated curb in place just postpones the same fogged seal by another eighteen months.
- ES Windows skylight glazing with cracked outer lites from falling fronds. In neighborhoods with mature royal palms and oaks, we replace outer lites on ES Windows roof glazing that have been hit by falling fronds. The outer lite on most ES Windows roof units is laminated safety glass, and when the impact is severe enough to crack it, the inner lite is rarely far behind. We inspect both panes, measure the exact sightline, and replace the impacted lite without disturbing the factory seal of the inner unit unless it has already failed.
Our ES Windows Roof Repair Process
Here’s how a typical ES Windows roof repair goes when you call us. This is the order of operations, and we don’t skip steps to save time on a roof opening.
- 1
Call and tell us what you’re seeing. A live person answers, in our office, day or night. We’ll ask what kind of ES Windows product it is, where the water appears, and when it started. Dale Kessler often gets on the phone for roof glazing calls because he grew up off Broward Boulevard and knows the roof decks on these houses.
- 2
We inspect the roof opening from above and inside. One visit, not three. We look at the curb, the flashing, the weep system, the sealant lines, and the interior water path. We won’t quote a repair until we know where the water is actually entering.
- 3
We decide OEM vs. aftermarket and put it in writing. For gaskets, wedges, and setting blocks on ES Windows roof units, we use ES Windows factory parts when they’re available. When lead times are long, we’ll source a quality aftermarket equivalent and tell you in writing what we used and why before we install it.
- 4
We get on the roof and do the repair. The roof deck gets covered, the old sealant and hardware come out, the curb gets corrected if it needs it, and the frame goes back in true.
- 5
We water-test the glazing and the surrounding roof connection. We don’t call a roof repair done until we’ve soaked the seam and checked for water on the interior, which is the test that matters.
- 6
We register the warranty on paper and hand you the receipt. The Done Right Promise and any manufacturer warranty layers are written, signed, and left with you before the truck pulls out.
What ES Windows Roof Repair Costs in Plantation
Most ES Windows roof repairs in Plantation fall between $450 and $1,900 depending on what’s failed. Resealing perimeter glazing on a single roof monitor usually runs $450 to $850. Replacing operator hardware on an ES45 roof vent runs $350 to $650. Replacing a cracked outer lite on a fixed roof panel runs $700 to $1,400 depending on size and lamination. If the curb under the glazing has rotted or shifted, expect to add $500 to $1,500 for curb correction, which is the work most homeowners don’t see coming.
What moves the price is roof access, whether it’s a two-story exterior, tile-to-metal flashing transitions, and how long the original installer’s sealant has been failing. We quote a fixed price in writing and we don’t change it once we start. Call (772) 577-2915 for a free estimate, and we’ll tell you honestly whether the fix is reseal, rebuild, or replace.
Why Plantation Homeowners Call TruePane Windows & Doors for ES Windows Work
We’ve been doing this long enough to know that once a roof glazing leak appears, the homeowner has usually already paid somebody once to “fix” it. We’re the company they call after the second leak, the one they want done right the first time. Our technicians know ES Windows tight tolerances, and we also service PGT, CGI, CWS, and ECO Window Systems roof glazing, so when we tell you the ES Windows sealant was the problem, it’s because we ruled everything else out. Every repair is backed by the Done Right Promise, both manufacturer warranty layers are registered in writing before we leave, and a live person answers the phone day and night. If the pane is not true, the job is not done – and neither is the flashing around it.
FAQs
Most single-unit ES Windows roof repairs are completed in one visit of about three to six hours once parts are on hand. If the curb needs to be rebuilt, you’re looking at an additional day for framing and concrete work to cure. We’ll tell you the realistic schedule in writing before you commit, and we’ll be there when we say.
That depends on what’s wrong and how old the installation is. We’re an independent service provider, not an ES Windows authorized facility, and we’ll be straight with you about whether the original manufacturer warranty still applies to your unit. Where it does apply, we’ll walk you through the paperwork and make sure repair records are kept in a way that won’t burn a legitimate future claim. Where it doesn’t, our Done Right Promise steps in and we’ll stand behind the work in writing.
If the frame is still square and the curb is sound, repair usually makes more sense than replacement. If the curb has rotted or the aluminum has corroded through at the corner welds, you’re throwing good money after a bad repair, and we’ll tell you that on the first visit. Call (772) 577-2915 and we’ll give you an honest read before quoting anything.
Yes. Most of the ES Windows roof repairs we do in Plantation are on installations we didn’t do originally. The original installer is often gone, retired, or not interested in coming back for a leak. We don’t care who set it first, we care whether it’s square, level, and watertight when we’re done. If it is not square, level, and in writing, it is not done.
We use ES Windows factory gaskets, wedges, and setting blocks whenever they’re available for your model line. When lead times stretch, we use quality aftermarket equivalents and disclose it in writing before the job starts. The sealant and flashing materials we use are selected for South Florida’s heat and rain cycles, not for the manufacturer’s convenience.
If you’re dealing with a leaking ES Windows roof unit in Plantation, don’t wait until the drywall stains spread. Call (772) 577-2915 and we’ll give you a straight answer, a written quote, and a repair that stays repaired.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Plantation and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.