ES Windows Shingle, Tile & Metal Roofing Nationwide | TruePane Windows & Doors

ES Windows Shingle, Tile & Metal Roofing in Plantation: What to Know First

TruePane Windows & Doors provides independent ES Windows shingle, tile & metal roofing service for homeowners throughout Plantation, FL. Most ES Windows roofing-related repairs and replacements are completed within three to five business days of the estimate, depending on what the job requires. Pricing runs honest and upfront: you’ll see the full cost on paper before any work begins, with no surprise line items added later. If you own ES Windows products and the shingle, tile, or metal roofing around them has started to fail, call (772) 577-2915 and we’ll schedule a free estimate at your home. This page explains what we see most often on ES Windows installs in Plantation, how we fix it, and what a square deal looks like.

Call (772) 577-2915

How ES Windows Products Fail - and How We Fix Them

ES Windows builds a solid product, but in Plantation’s heat and humidity, certain failure patterns show up across their lines. Here’s what we find on the shingle, tile, and metal roofing side:

• Flashing separation on ES Windows impact-rated units. The ES Windows Impact Series and ES Windows StormMax lines are common in Plantation homes built after 2005, when Broward County tightened its wind-load codes. What we see after ten or fifteen years of Florida sun is the metal flashing pulling away from the window frame where it meets the roof deck. The cause is usually thermal cycling: aluminum expands and contracts at a different rate than the concrete tile or metal panel above it. Over time the sealant bond fails, and water gets behind the flashing. The fix is pulling the old flashing, prepping the surface properly, and reinstalling with a commercial-grade sealant rated for the Broward County climate. Done right, it holds for another decade plus.
• Roof-to-window transition leaks on tile roofs. Barrel tile and flat tile roofs are everywhere in Plantation, and the transition where tile meets an ES Windows frame is a known weak point. We regularly see ES Windows ES Vista and ES Classic series units where the step flashing was never properly integrated with the tile underlayment. Water runs down the tile, hits a gap, and rides the window frame straight into the wall cavity. By the time a homeowner notices the drywall staining, the damage is already underway. Our fix involves removing the affected tile, checking the underlayment, and rebuilding the transition so water sheds away from the frame entirely.
• Metal roof panel movement stressing the window nailing flange. On standing-seam metal roofs, the panels move with temperature swings. If an ES Windows unit was set too tight against the panel edge, that movement works the fasteners loose over time. We see this on ES Windows Elite and ES Windows Targa series installs where the original roofer or window installer didn’t account for expansion. The symptom is a window that starts to bind or a roof edge that looks slightly lifted. The fix is re-shimming the window to restore proper clearance and re-securing the flange, then verifying the roof panel can move freely.
• Skylight-to-ES Windows frame intersections on additions. A lot of Plantation homes from the 1980s and 1990s were added onto over the years, and when a skylight was put in near an existing ES Windows unit, the original flashing job was often improvised. ES Windows ES Series Fixed units flanking a skylight are particularly prone to this. We find rusted old flashing, silicone smeared over failed butyl, or no saddle flashing at all behind the skylight curb. The repair means pulling the skylight flashing, rebuilding the curb, and re-flashing the window-to-roof junction correctly. This is not a caulk-it-and-hope situation; it’s a tear-out-and-do-it-right job.
• Wind-driven rain intrusion around operable units under wide overhangs. Plantation gets serious summer downbursts, and when an ES Windows operable unit is set under a deep overhang, the roof design can funnel water directly at the window head. The ES Windows Casement and ES Windows Single Hung lines have weep holes that are designed to drain intermittent water, but sustained wind-driven rain against a compromised roof edge overwhelms them. The real issue is usually the roof flashing above the window, not the window itself. We address it at the source: the roof-to-wall junction gets rebuilt, the window gets tested under simulated wind-load conditions, and then we verify the weep system is clear and functioning.

Our ES Windows Shingle, Tile & Metal Roofing Process

Here’s how a typical ES Windows roofing job goes when we’re called out to a Plantation home:

1. 1
   Call and assessment. A live person answers. We ask about the symptom, the window model if you know it, and the roof type. Most jobs get scheduled for an on-site estimate within a few days.
2. 2
   On-site diagnosis. We inspect the window-to-roof transition, check the flashing, the underlayment, the weep system, and the frame for movement. We measure everything twice, because a wrong measurement on a roof transition means the fix fails.
3. 3
   Written estimate and parts decision. We show you the options on paper. When OEM ES Windows parts are available and make sense, we use them. When a quality aftermarket flashing or sealant will perform better in the Plantation climate, we tell you why and price it honestly.
4. 4
   The repair or replacement. Our background-checked, uniformed technicians do the work. That means removing the affected roofing material, rebuilding the transition, setting the window properly if it’s moved, and installing the flashing exactly as it should have been from the start.
5. 5
   Testing and warranty registration. Before the truck leaves your driveway, we water-test the junction, check the operation of the window, and register both warranty layers in writing with the durations stated. That’s The Keystone Standard.
6. 6
   Cleanup and follow-through. The work area is left clean. If anything isn’t right within 90 days, we come back and make it right. No paperwork fights, no arguing. That’s the Done Right Promise.

What ES Windows Shingle, Tile & Metal Roofing Costs in Plantation

Most ES Windows roofing-related repairs in Plantation fall between $350 and $2,800, depending on what’s actually wrong. Here’s the honest breakdown:

• Flashing repair where one ES Windows unit meets the roof: typically $350 to $950, depending on access and whether roof tile or metal panels need to be removed and reset.
• Roof-to-window transition rebuild with step flashing and underlayment correction: typically $800 to $1,800, depending on how much tile or metal needs to come off and whether the underlayment itself is compromised.
• Whole-side flashing and re-integration of multiple ES Windows units: typically $1,500 to $2,800 for a full roof edge, with material choices affecting the final number.

What moves the price? Access matters. A second-story window on a steep tile roof costs more than a first-floor unit on a shallow-pitch shingle roof, because the labor is different. Underlayment condition matters too: if the original underlayment is failed, covering over it isn’t a repair, it’s a placeholder. We price the job as a fix that stays fixed. Call (772) 577-2915 for a free estimate, and we’ll put exact numbers on paper before anything starts.

Why Plantation Homeowners Call TruePane Windows & Doors for ES Windows Work

Dale Kessler grew up off Broward Boulevard, close enough to the old Plantation Fashion Mall to remember when that stretch of road was half strip plazas and half open lots. He learned glazing through the building trades program at McFatter Technical College in Davie, and the company he founded in 2008 has spent more than four decades serving local communities through craft and follow-through. When we work on an ES Windows product, we treat it the way we’d work on our own home. We’re not the cheapest bid on the board, and we don’t try to be. We’re the crew that shows up on time, measures twice, puts the quote on paper, and stands behind the work. If the pane is not true, the job is not done. If it is not square, level, and in writing, it is not done.

We also work on PGT, CGI, CWS, and ECO Window Systems products, which matters in Plantation because so many homes have a mix of brands across different remodel eras. When a roof transition involves multiple window brands, we handle all of them under one job, one estimate, and one guarantee. The Done Right Promise applies to every one.

FAQs