Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
ES Windows Windows & Doors in Plantation, FL | TruePane Windows & Doors
We provide independent ES Windows service across Plantation, from full-frame impact replacements to hardware and seal repairs on existing units. What sets our ES Windows work here apart is simple: we’ve spent over a decade retrofitting these exact aluminum and vinyl lines into Plantation’s pre-HVHZ ranch homes and converted screened porches, which means we know which ES product approvals actually pass Plantation’s wind-load inspections and which older ES frames develop the telltale salt-air oxidation and seal failures we see on Cleary Boulevard ranches. We’re not manufacturer-affiliated or authorized, and we’ll tell you that straight. Call (772) 577-2915 for a free estimate, and we’ll walk you through exactly what your ES Windows need.
Why Plantation Residents Choose Us for ES Windows Service
We’ve been full-frame retrofitting ES Windows aluminum and vinyl lines across Broward’s High Velocity Hurricane Zone for over a decade, so the quirks of these units aren’t surprises to us. Dale Kessler grew up off Broward Boulevard in Plantation and learned glazing through the building trades program at McFatter Technical College in Davie, then spent nearly two decades on Window Installation - Plantation and door projects ranging from 1960s ranch homes to newer impact-rated construction across Broward County. That means our crew doesn’t have to study up on your 1989 ES Windows 400 Series slider when we pull up to your driveway. We’ve already seen it, pulled it, and fixed it a hundred times. When we open up a Plantation wall and find the framing wasn’t done right the first time, we don’t pretend otherwise. We fix the opening before we set the glass. That’s the standard, and we put it in writing.
Common ES Windows Windows & Doors Problems We Solve in Plantation
- Seized rollers and jumped tracks on 400 Series sliding glass doors. Plantation’s sprinkler overspray and high water table leave bottom tracks pitted and corroded faster than inland Broward. The rollers bind, the panel jumps the rail, and the door won’t latch. We replace with Miami-Dade-approved stainless steel rollers and re-align the track in the same visit.
- Salt-air oxidation on 7000 and 8000 Series aluminum frames. Plantation sits close enough to the coast that ambient salt in the air accelerates aluminum pitting, especially on casement corners and single-hung jambs. We strip, treat, and reseal salvageable frames; when the oxidation has compromised the weatherstripping channel, full-frame replacement is the honest call.
- Fogged IGUs on 7700 Series picture windows. Year-round UV intensity and high humidity push seal failure faster here than in Central Florida. Once the argon’s gone and the glass fogs, the only fix that preserves the Florida Product Approval number is an OEM insulated glass unit. We order directly and swap it in one trip.
- Binding casement cranks on 7000 Series operators. The hardware on these cranks wears out with heavy daily use, and in Plantation’s humidity the gears collect corrosion. We rebuild the operator assembly with ES OEM parts when they’re in production, or a Miami-Dade-approved equivalent when they’re not.
- Pre-HVHZ single-pane aluminum sliders that don’t meet current impact codes. Most of the original ES Windows in Plantation date to before Broward’s HVHZ mandates. These units weren’t designed for the wind loads we build for now. We advise full-frame replacement rather than piecemeal repair, and we register both warranty layers before the truck leaves the driveway.
ES Windows Service in Plantation: What Local Conditions Mean for Your Equipment
Plantation’s building department has a specific trigger that catches a lot of homeowners off guard when they finally pull permits for impact window replacement. Those 1970s and 1980s screened-porch enclosures that got converted to air-conditioned living space, usually without permits, routinely lack proper structural headers above the window and door openings. The original aluminum roof beam was never framed to carry the load an impact-rated ES Windows unit requires. So when our crew opens up the drywall to set a new 7000 Series impact slider in an old Jacaranda-area porch, we frequently find there’s no header there at all. Inspectors require one. We frame in a pressure-treated king stud and an LVL header before a single ES Windows unit goes in. That’s a step you rarely encounter in neighboring Weston’s newer tract homes, where the openings were framed for impact glass from the start. If you’re planning ES Windows replacement on a converted porch, budget for the possibility of structural work. We’ll tell you before we start, not after.
ES Windows Models & Products We Service in Plantation
We service the full ES Windows residential line, including the 7000 Series Impact Aluminum Casement, 8000 Series Impact Single Hung, 400 Series Aluminum Sliding Glass Door, and 7700 Series Picture Window. For newer 7000 and 8000 Series units, we use OEM ES Windows hardware and insulated glass units whenever they’re available. That keeps your Florida Product Approval number intact, which matters when Plantation’s inspector asks for the paperwork. For out-of-production 400 Series sliders, we install Miami-Dade-approved equivalent rollers and weatherstripping. Our local parts shelf in Broward keeps common ES hardware and seal kits in stock, so most Plantation service calls wrap up in one visit. See our ES Windows sales & service page for the full brand overview.
ES Windows Service Pricing in Plantation
ES Windows service pricing in Plantation depends on the unit, the failure, and whether it’s a repair or a full-frame replacement. Hardware and seal repairs typically run $180 to $390. IGU replacement on a 7700 Series picture window lands between $350 and $850 depending on glass size and coating. Full-frame replacement of a 400 Series slider with a modern 7000 Series impact unit starts around $1,800 and climbs based on opening size, header work, and finish matching. What drives cost here more than anything: whether the opening was framed correctly in the first place. If we have to add an LVL header, that’s a line item we quote upfront. Your free estimate includes a written line-item breakdown, no change orders mid-job, and both warranty layers registered in writing before we’re done. Call (772) 577-2915 for an exact quote on your ES Windows.
Serving Plantation, FL - Our Local Coverage Area
We’re based in the Plantation area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - ES Windows Windows & Doors in Plantation
No. Jalousie windows do not carry HVHZ Florida Product Approval numbers, and replacing the glass panes won’t change that. Plantation inspectors don’t negotiate on this. The fix is full-frame replacement with an impact-rated ES Windows unit, and if the porch was converted without permits we’ll likely need to add a structural header first. Call (772) 577-2915 and we’ll give you a straight answer based on your specific opening.
Plantation’s humidity and salt-air exposure are heavier on casement hardware than inland Coral Springs, which accelerates gear corrosion and hinge pitting on the 7000 Series operator. We rebuild the assembly and re-seal the frame. If the crank’s already stripped, repair is quick. Call (772) 577-2915 and we’ll get it turning again.
Yes. The 8000 Series bronze finish is still in production, and we order exact-match OEM frames through the same distribution channels ES Windows uses in South Florida. We’ll walk you through finish samples before you sign anything.
That Florida Product Approval number covers the product as originally manufactured, not the way it was installed in your Plantation home. If the opening lacks a structural header, or the Door Installation - Plantation was done without HVHZ-compliant anchoring, the inspector will fail it regardless of the approval sticker. We fix the opening, re-set the door, and the inspection passes. Call (772) 577-2915 for a free on-site assessment.
You generally can’t. Fixed picture windows don’t provide opening protection, so they don’t earn wind mitigation credits unless they’re impact-rated with documented Florida Product Approval numbers. Most pre-HVHZ ES picture windows in Plantation don’t qualify. Full-frame replacement with impact-rated ES Windows is the path to credits. Call (772) 577-2915 and we’ll quote both options in writing.
Service Areas Near Plantation
Our ES Windows crew serves Plantation and the surrounding Broward communities, including Plantation service area, Lauderhill, Lauderdale Lakes, Sunrise, Davie, and Tamarac. If you’re in ES Windows service in Lauderhill or ES Windows service in Lauderdale Lakes, we’ll bring the same full-frame expertise to your door.
Book Your ES Windows Service in Plantation Today
We’ll be there when we say, and we’ll tell you the truth about your ES Windows whether it’s a $200 roller rebuild or a $4,000 full-frame impact replacement. Call (772) 577-2915 for your free estimate. If the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Plantation since 2008. If it is not square, level, and in writing, it is not done.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After