Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterJeld-Wen Custom Windows & Doors in Plantation: What to Know First
We handle Jeld-Wen custom windows and doors in Plantation as an independent Jeld-Wen service provider, and most custom glass or door work is quoted within one business day and finished in a single visit. A typical custom Jeld-Wen repair or replacement runs $290 to $1,800 depending on the series, glass package, and whether it’s a glass-only fix or a full frame reset. If you own a Jeld-Wen window or door in Plantation and it’s binding, fogging, or failing to seal against the humidity, call us at (772) 577-2915 and we’ll tell you what it will take, in writing, before any work begins.
This page is for homeowners in Plantation who already own Jeld-Wen products and need someone who knows how those specific units fail in South Florida’s climate, not a salesperson trying to sell them a full-house replacement they may not need.
How Jeld-Wen Products Fail - and How We Fix Them
- Jeld-Wen Siteline wood casement sashes warp and bind by year eight. The Siteline series used finger-jointed wood that does not love Plantation’s six-month humidity soak. We see the lower sash corner pull away from the weatherstripping, letting conditioned air seep out and salt air creep in. Our fix is a realignment and bedding of the sash with stainless shims, not foam that collapses in a year.
- Builder’s-grade Jeld-Wen vinyl sliders (the old Builders Atlantic line) develop channel sag. The roller assemblies were light for the glass weight, and the bottom track wears unevenly. The door gets heavy, then the handle starts eating the frame. We replace the rollers with a heavier aftermarket carriage rated for the panel weight and re-true the track, instead of telling you to buy a new door.
- Jeld-Wen Premium Atlantic vinyl windows lose argon and fog at the lower corners. This is the most common Jeld-Wen failure we run into in Plantation. It is not a housekeeping issue and it does not mean the window is dead. It is a seal-break at the desiccant strip, usually from a combination of solar heat on the west-facing wall and a seal that was never thick enough at the corner radius. We replace the insulated glass unit and set it with a low-modulus sealant rated for Florida UV.
- Custom shape Jeld-Wen windows (arch tops, radius units, trapezoids) leak at the frame joints after the caulk line fails. The problem is not always the glass. On Jeld-Wen custom shapes the frame corners were joined at the factory, and South Florida’s thermal cycle works those seams. We pull the trim, re-seal the joinery from the outside with a polyurethane sealant, and re-flash the opening so water stays outside where it belongs.
- Jeld-Wen wood patio doors in Plantation homes lock up in August and leave a gap in January. The wood swells with humidity and the panel outgrows the frame. Forcing the lock bows the stile. We ease the panel edge by removing stock from the hinge side, not the strike side, then re-shim the frame so the reveal stays even from top to bottom.
Our Jeld-Wen Custom Windows & Doors Process
- 1
Call and describe the problem. A live person answers at (772) 577-2915, day or night. We ask what the unit is doing, when it started, and which side of the house it is on. That last part tells us more than most people expect.
- 2
We measure and diagnose on site. A uniformed tech comes out, measures every opening twice, and checks the reveal, the plumb, and the seal line. For Jeld-Wen units, we document the series, glass package, and any Florida Product Approval labels still legible on the frame.
- 3
We present parts options in writing. For glass units and hardware we price OEM Jeld-Wen parts against proven aftermarket equivalents, side by side, so you see exactly what you’re buying and what it costs. No verbal assurances, no “trust me” pricing.
- 4
We do the work in one visit, most of the time. The repair or replacement is completed on the scheduled day with the truck stocked for Jeld-Wen work. If we open the wall and find something the previous installer left behind, we stop, document it, and quote the fix before proceeding.
- 5
We test before we leave. The unit is operated full-cycle, the reveal is checked top to bottom, and the seal line is inspected with a feeler gauge. Dale Kessler’s rule is in effect on every job: if it is not square, level, and in writing, it is not done.
- 6
Both warranty layers get registered. That means the manufacturer’s warranty on parts and our Done Right Promise on labor, stated in writing, before the truck pulls out of your driveway.
What Jeld-Wen Custom Windows & Doors Costs in Plantation
Here is what we charge for common Jeld-Wen work in Plantation. Prices are fixed before we start, with no change orders unless you approve one in writing.
- Insulated glass unit replacement on a Jeld-Wen Premium Atlantic or Siteline window: $290-$580 per sash, depending on glass size and whether it’s argon-filled or a standard clear unit.
- Roller and track rebuild on a Jeld-Wen sliding patio door: $220-$410, parts and labor.
- Custom shape window re-seal and re-flash (arch top, radius, trapezoid): $480-$950, including trim work and exterior sealant.
- Full Jeld-Wen door panel replacement with hardware transfer and frame reset: $800-$1,800, depending on panel type, glass options, and whether the frame needs re-shimming or a new sill.
- Complete custom window replacement with a Jeld-Wen unit built to spec: quoted per opening, typically $850-$2,400 installed, based on size, shape, glass package, and structural requirements.
What moves the price: size of the glass, whether the unit is a custom shape versus stock rectangle, if the opening needs new framing or flashing, and whether you need impact-rated glass to meet Broward County code. Call (772) 577-2915 for an exact quote. The estimate is free, and it comes in writing.
Why Plantation Homeowners Call TruePane Windows & Doors for Jeld-Wen Work
We have been serving Plantation and Broward County since 2008, and Dale Kessler started TruePane in 2008 because he watched too many good windows get ruined by careless installs. Every Jeld-Wen job we take is backed by the Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated for the record, and a workmanship guarantee that does not require a paperwork fight to enforce. Our techs are background-checked and uniformed, and they know Jeld-Wen’s quirks because they have seen hundreds of these units in Plantation homes. If a Jeld-Wen part is discontinued or backordered, we can also pull from our work with Andersen, Pella, and PGT to find an equivalent that fits. We answer the phone 24 hours a day. We show up when we say. And we stand behind the work.
FAQs
Most Jeld-Wen product warranties cover the parts, not the labor, and they stay valid as long as the work is done correctly and the manufacturer’s installation guidelines are followed. As an independent Jeld-Wen service provider we do not void the manufacturer’s warranty by working on the unit. We register both warranty layers on our end, in writing, so you know exactly what the manufacturer covers and what our Done Right Promise covers. Call (772) 577-2915 and we will tell you whether calling Jeld-Wen first is even worth your time.
It depends on the series. Jeld-Wen has carried forward many hardware and glass specs across product generations, but some old custom shape frames are no longer in production. Wheels, balances, weatherstripping, and insulated glass units are usually available either from Jeld-Wen or from proven aftermarket suppliers. We quote both options on paper before we start. If a part is truly gone, we will tell you that too, and show you what a compatible replacement costs.
If the frame is sound and square, repair is usually the better money. A fogged glass unit, worn rollers, or failed weatherstripping does not mean the window is done. Replacement makes sense when the frame has rotted, the joinery has separated, or you want to upgrade to impact glass and the existing frame cannot carry the additional weight. We will show you both numbers and let you decide, which is more than most window companies will do.
Most custom Jeld-Wen repairs are done in a single scheduled visit, and we quote within one business day of seeing the unit. If you have water coming in or a door that will not close, call us at (772) 577-2915 and we will get someone out to look at it.
When the job requires a permit under Broward County or City of Plantation code, we pull it and the inspection gets passed before we consider the job finished. We also walk you through the Florida Product Approval paperwork for any impact-rated unit, before anyone signs anything. It is part of the job, not an extra charge, not an afterthought.
No. The price we quote is the price you pay, unless we find something hidden and you approve a change order in writing first. No surprise line items on the bill, ever. That is the square deal, and it is how we have done business in Plantation since 2008.
If your Jeld-Wen windows or doors are giving you trouble, call (772) 577-2915 and talk to a live person. We will tell you straight what it costs and what it takes to fix it right.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Plantation and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.