Mr-Glass Energy-Efficient Windows Nationwide | TruePane Windows & Doors

Mr-Glass Energy-Efficient Windows in Plantation: What to Know First

We service and replace Mr-Glass energy-efficient windows throughout Plantation, including the older insulated units that have lost their argon fill or developed seal failure over twenty-plus years of South Florida humidity. Most Mr-Glass window work is quoted within one business day, and we give you the number in writing before anyone picks up a tool. If you own a Mr-Glass window that fogs between the panes, drafts at the frame, or lets the afternoon sun turn your living room into a kiln, call (772) 577-2915 and we’ll take a look.

Call (772) 577-2915

This page is for Plantation homeowners who bought Mr-Glass windows years ago and want to know whether to repair, re-glaze, or replace them. We’re an independent Mr-Glass service provider, which means we tell you what the window actually needs, not what a manufacturer’s sales sheet says it needs.

How Mr-Glass Products Fail - and How We Fix Them

After four decades of working on Broward County glass, we’ve learned that every brand fails in its own particular way. Mr-Glass windows share a few recurring trouble spots, especially the insulated energy-efficient units that have been up since the 1990s and early 2000s. Here’s what we see in Plantation specifically:

• Seal failure in early Mr-Glass dual-pane units. The first generation of Mr-Glass insulated glass used a polysulfide edge seal that breaks down under constant UV and humidity cycling. The symptom is a milky haze between the panes that never wipes clean, and it means the argon gas is gone and the U-value has climbed. Replacement involves ordering an exact-size insulated glass unit from a Miami-area fabricator, not a patched reseal.
• Interior condensation on the Mr-Glass series installed with aluminum frames. Many older Mr-Glass energy-efficient windows in Plantation were set into non-thermal-broken aluminum frames, a design that condenses at the frame’s interior lip during winter cold snaps, even when the glass itself is still sound. We address this by adding a thermal break or replacing the sash with a properly insulated frame, depending on the model year.
• Argon depletion in Mr-Glass Low-E packages. The Low-E coated glazing on certain Mr-Glass windows was a good product for its time, but the gas fill was inserted at a modest pressure. After fifteen or twenty years, the spacing between the panes can shift, the gas escapes through micro-fissures in the sealant, and the window’s insulating performance falls off a cliff. We verify gas loss with a spark tester before quoting anything.
• Weep-channel clogging on Mr-Glass sliding windows installed on Plantation ranch homes. The weep holes on the lower track of certain Mr-Glass horizontal sliders were undersized. Combined with Plantation’s rainy season and wind-driven water, clogged weeps cause water to pool inside the track and wick into the wall cavity, often showing up as peeling paint below the sill. We clear the channels, test with a calibrated water spray, and re-level the track if it has settled.
• Hardware fatigue on tilt-pack Mr-Glass casement and awning windows. The tilt-latch mechanism on older Mr-Glass crank windows wears to a point where the sash will not seat tightly against the weatherstripping, leaving a constant draft. Sometimes the fix is a rebuilt hardware set; other times, when the frame has racked, the practical repair is a full sash replacement with new weatherstripping and a square, level re-set.

Our Mr-Glass Energy-Efficient Windows Process

Every Mr-Glass job follows the same sequence, whether it’s a single fogged sash in Plantation Acres or a full replacement of picture windows on a 70s ranch off Broward Boulevard. We do not skip steps, and we do not leave a job until the pane sits true.

1. 1
   We open with a real inspection, not a quote. A uniformed, background-checked technician measures every opening twice, checks the existing frame for rack, and uses a spark tester to confirm gas loss before recommending any repair. On a Mr-Glass window, the inspection is what tells us whether the glass unit is the only fault or the frame needs attention too.
2. 2
   We put the parts decision on paper next to the price. For Mr-Glass windows, OEM parts are not always available, and when they are not, we source quality aftermarket insulated glass units from a Florida-certified fabricator with the same Low-E and gas fill specifications. You see both options, the cost difference, and the warranty on each before you decide.
3. 3
   We remove the old sash carefully. Mr-Glass frames from the early 2000s can have hidden rot at the corners, especially on the lower track. We do not find out about it after we have already opened the wall up; we account for it in the initial measure, and if we uncover more serious damage, we stop and show you exactly what we found before proceeding.
4. 4
   We set the new glass and re-level everything. A high-quality insulated unit performs only as well as the frame it sits in. We re-shim, re-square, and re-seal the entire opening, not just the pane itself. If the frame sits out of level even by an eighth of an inch, the window will bind and the seal will fail early. That’s the shim step nobody sees and everybody feels when it’s skipped.
5. 5
   We register both warranty layers before we leave your driveway. Manufacturer warranty on the glass unit, written durations, and our Done Right Promise on the workmanship. No paperwork fights, no arguing. If something is not right, we are back.
6. 6
   We cleanup the old glass, the old caulk, the old weatherstripping, and we leave your yard the way we found it. That includes hauling away the old sash unless you ask us to leave it.

What Mr-Glass Energy-Efficient Windows Costs in Plantation

Most Mr-Glass energy-efficient window work in Plantation falls into a few predictable price bands. A single clogged weep track or a weatherstripping revisit typically runs $90 to $220. Replacing one failed insulated glass unit in an existing Mr-Glass frame, including the new Low-E argon-filled unit and our labor, usually lands between $340 and $680 depending on the sash size and whether the frame needs to be re-leveled. A full replacement of a Mr-Glass window with a new energy-efficient unit from one of the lines we install, Andersen, PGT, or CGI, often starts around $850 and runs up from there based on impact rating, frame material, and the condition of the existing rough opening.

What moves the price on a Mr-Glass job is the frame. If the frame is sound, the repair is straightforward. If the frame is racked, rotted, or out of square, the same glass quote doubles in labor. That’s the honest answer, and it’s the one we give you on the first visit, in writing. Call (772) 577-2915 for a free estimate on your Mr-Glass windows, and we’ll come measure.

Why Plantation Homeowners Call TruePane Windows & Doors for Mr-Glass Work

We’ve been serving local communities since 2008, and we plan to be here in thirty more. That matters when you’re deciding whether to repair a Mr-Glass window that has decades of service left in it. Our founder, Dale Kessler, grew up off Broward Boulevard in Plantation, learned the trade through McFatter Technical College in Davie, and spent twenty years setting and finishing windows across Broward County before he started TruePane Windows & Doors in 2008 with one rule on the whiteboard: If the pane is not true, the job is not done.

Our technicians know Mr-Glass window quirks, and they also know when a repair no longer makes sense and a replacement is the better spend. Because we’re an authorized installer for more than a dozen manufacturer lines, including PGT, CGI, CWS, and ES Windows, we can quote you a side-by-side comparison on paper rather than a single brand with no alternative. A live person answers the phone 24 hours a day, 7 days a week, not a voicemail tree. Every job is done on The Keystone Standard, both warranty layers registered in writing before the truck leaves your driveway, and our Done Right Promise covers the workmanship with no fine print.

FAQs