Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterPella Door Installation in Plantation: What to Know First
Pella door installation in Plantation typically runs $850 to $2,900 for a standard entry or French door replacement, with most jobs completed in a single visit once materials are on hand. We’re an independent Pella service provider, which means we install, repair, and replace Pella doors without being beholden to a manufacturer’s script. Parts availability and the condition of your existing frame are the two biggest factors that move the price. If you’re a Plantation homeowner with a Pella door that binds, sags, or leaks air after twenty years in the Florida humidity, call (772) 577-2915 and we’ll give you a straight answer before we ever schedule a truck.
This page is written for the homeowner who already owns a Pella door and needs it set right, not for someone comparison-shopping brands from scratch. Dale Kessler and the TruePane crew know Pella’s product lines well enough to tell you which problems are worth fixing and which doors have earned their retirement.
How Pella Products Fail - and How We Fix Them
Pella builds a solid door. But every product line has its weak points, and south Florida’s heat, humidity, and rain expose them faster than a Minnesota winter ever could. Here’s what we see on Pella doors in Plantation, and what we do about it.
- Pella Architect Series wood doors - swollen panels and stuck sashes. The Architect Series uses genuine wood frames, and wood moves. In Plantation, where summer humidity hovers near 90%, the bottom rail of an entry door can swell enough to bind against the threshold. Most homeowners assume the hinges are failing. They’re not. We pull the door, plane the rail to the correct clearance with a moisture meter on hand, and reseal the bottom edge so it doesn’t happen again next July. Pella’s own site won’t tell you the real cause is moisture wicking through an unsealed end grain.
- Pella 450 Series and Lifestyle Series - roller sag on sliding doors. Pella’s mid-range sliding patio doors use steel rollers that wear down over time, and after a decade of Plantation humidity plus salt air drifting in from the coast, those rollers pit and the door starts scraping. The fix isn’t always a new door. We replace the rollers with quality aftermarket stainless assemblies, clean the track, and adjust the reveal so the door glides like it did when the house was new. The OEM rollers fail the same way again; stainless doesn’t.
- Pella Impervia fiberglass doors - hinge screws loosening in the jamb. Fiberglass doors are tough, but the hinges are screwed into the fiberglass jamb without the same bite you’d get in wood. After years of use in a humid climate, the screws start to walk out, and the door hangs crooked. A lazy fix is longer screws. The right fix is to pull the door, fill the old holes with epoxy, redrill, and reset the hinges so the door sits square in the opening. This is the kind of repair that separates a tradesperson from a handyman.
- Pella entry doors with broken glass inserts - mismatched aftermarket glass. Pella’s decorative glass panels are made to an exact size, and generic replacement glass is often too thick, too thin, or the wrong spacer pattern. We source OEM-compatible glass that matches the original specs, including the low-E coating and argon fill, so the door looks and performs the way Pella intended. If the door is a Pella 750 Series with between-the-glass blinds, we handle the whole sash replacement carefully, because one cracked corner on that internal mechanism means a full reorder.
- Failed weatherstripping and threshold gaskets across most Pella lines. Pella’s Q-Lon weatherstripping is good stuff, but it’s a wear item. In Plantation, where afternoon thunderstorms are a daily summer event, a worn threshold gasket means water wicking under the door and into the subfloor. We replace the gasket and weatherstripping with exact-profile materials and test the door with a hose before we call the job done. If water gets past the threshold, the door isn’t done.
Our Pella Door Installation Process
A Pella door job at TruePane starts with a phone call to (772) 577-2915 and doesn’t end until the door is square, sealed, and the warranty paperwork is in your hand. Here’s the order of operations.
- 1
Measure and photograph. We don’t quote a door job over the phone. A uniformed tech comes out, measures the rough opening twice, checks the jamb for rot and out-of-plumb conditions, and photographs everything. This is a Pella door, not an off-the-shelf slab, so the numbers have to be exact.
- 2
Paper quote, side by side. We put the numbers in writing before any work starts. If the repair involves parts, we show you the OEM option and the quality aftermarket option on paper, with prices, so you’re making an informed call, not hoping we made the right one.
- 3
Parts decision and ordering. For Pella repairs, we use OEM-compatible parts where they matter most: glass, weatherstripping, threshold gaskets, and hardware. If the OEM part has a known weak point (like the steel rollers above), we’ll tell you and give you the upgrade option. But we never substitute a cheap part without telling you.
- 4
Installation and shimming. This is where Dale’s training at McFatter Technical College and two decades of Broward County installs show up. We shim the door in the frame until it’s square, level, and plumb in every plane. A door that’s out of true at the top will bind at the bottom. We don’t leave it that way.
- 5
Water test, air test, and documentation. Before we put the tools in the truck, we test the door with water, check the air seal with a smoke pencil, and cycle it a dozen times. Then we register both warranty layers in writing, with durations stated, as part of The Keystone Standard.
- 6
Cleanup and a walkthrough. We leave the job site cleaner than we found it, and we walk you through what we did, what we saw, and what to watch for. If something isn’t right within 90 days, the Done Right Promise covers it. No arguing.
What Pella Door Installation Costs in Plantation
Honest numbers matter, so here’s what we see in Plantation for Pella door work as of the 2026 season.
- Entry door slab replacement (Pella 450 or Lifestyle): $850-$1,500, depending on glass, hardware, and frame condition.
- Full frame entry door replacement (Pella Architect or Impervia): $1,800-$2,900, including new threshold, brickmould, and weatherproofing.
- Sliding glass door roller replacement (Pella Lifestyle or 450): $350-$650 per panel, including stainless rollers, track cleaning, and adjustment.
- French door hinge reset and realignment (Pella Architect or Impervia): $275-$500, depending on whether the JAMB needs epoxy work or just new screws.
- Weatherstripping and threshold gasket replacement: $225-$400 for a standard single door.
What moves the price: the condition of the rough opening, whether we’re replacing a slab or a full frame, the cost of OEM glass, and whether the existing jamb is rotted from years of Plantation rain. We’ll quote it in writing before we start, and the number on the quote is the number on the bill. Call (772) 577-2915 for a free estimate, and you’ll get a real number, not a range with a shrug.
Why Plantation Homeowners Call TruePane Windows & Doors for Pella Work
We’re not a franchise and not a call center. TruePane Windows & Doors has been serving Plantation and Broward County since 2008 through a craft tradition that started before Dale Kessler even opened the company in 2008. We hire local, train apprentices into journeymen, and sponsor county fairs and church roof funds because we plan to be here in thirty years. A live person answers the phone 24 hours a day, 7 days a week. Background-checked, uniformed techs show up when we say they will. And every job is covered by the Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves the driveway. If you’ve got a Pella door that needs work and you don’t want to fight with a warranty department, call us. We also service Andersen, PGT, and CGI doors, so if Pella turns out to be the wrong fit for a full replacement, we’ll show you the alternatives on paper, side by side.
FAQs
Yes, we install and repair Pella doors using OEM-compatible parts and manufacturer-approved methods where the warranty is concerned. As an independent Pella service provider, we’re not authorized by the manufacturer, but our work is done to the standard that keeps warranty coverage valid. We also register both warranty layers in writing under The Keystone Standard, so you have a paper trail from day one. Call (772) 577-2915 and we’ll talk through the specifics of your door’s warranty.
Most Pella door installations and repairs in Plantation are completed in a single visit once the door or parts are on hand. Full frame replacements on an Architect Series or Impervia can take six to eight hours. A roller replacement on a Lifestyle sliding door is usually a two to three hour job. When you call for an estimate, we’ll give you a realistic timeline for your specific door.
If the frame is still sound and the issue is hardware, weatherstripping, or glass, repair is almost always the better value. If the jamb is rotted or the door has shifted out of square due to foundation movement, replacement is usually the honest answer. We’ll inspect your door and tell you which direction makes sense. We don’t sell replacements that aren’t needed. Call (772) 577-2915 for an assessment.
We have access to OEM-compatible parts for Pella doors going back decades, including Architect Series, 450 Series, Lifestyle Series, and entry door hardware. Some older decorative glass patterns are no longer in production, but we can often source period-correct replacements or a quality match. If we can’t get the right part, we’ll tell you before any money changes hands.
We serve Plantation, Davie, Sunrise, Weston, Cooper City, and the surrounding Broward County communities. Dale grew up off Broward Boulevard in Plantation and learned the trade at McFatter Technical College in Davie, so this is home territory. If you’re within reasonable driving distance, we’ll be there when we say. Call (772) 577-2915 to schedule a free estimate.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Plantation and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.