Simonton Window Installation Nationwide | TruePane Windows & Doors

Simonton Window Installation: The Plantation Owner’s Guide

Simonton window installation in Plantation typically runs $95 to $210 per window for a sash replacement or balance system, and $340 to $780 for a full window replacement with frame work. Most jobs are completed in a single visit. We stock Simonton-compatible balances, pivot bars, tilt latches, and sash guides on our trucks, so if you call before noon, we can usually have a technician at your home the same day with the right part in hand.

Call (772) 577-2915

The way most Plantation homeowners discover they need Simonton window installation is gradual. A window that used to glide now needs two hands to lift. Or it drops shut on its own. Or it tilts in for cleaning and won’t lock back into place. By the time you’re fighting the window, the part has already failed. What you need is someone who knows which Simonton part failed, whether it’s worth repairing, and what the honest installed price is. That’s what this page covers.

Key takeaways:

• We install Simonton-specific parts and full windows across Plantation, including Reflections, ProLine, and Impressions series
• Installed part replacement starts around $95; full window installation starts around $340
• We register both manufacturer warranty layers in writing before we leave your driveway
• TruePane is an independent service provider, not affiliated with Simonton

Which Simonton Models This Applies To

Simonton has manufactured several window lines over the years, and the part that fits one series often won’t fit another. The three most common series we see in Plantation homes are the Simonton ProLine (contractor-grade, common in 1990s and 2000s construction), Reflections (mid-range, with a wider frame profile), and Impressions (premium, often with wood-laminate interiors). Each series uses different balance mechanisms and tilt hardware, and even within a series, the part changes depending on sash weight and window width.

Here’s the compatibility gotcha: Simonton balance systems are stamped with a code that corresponds to sash weight, not window width. A 32-inch ProLine sash and a 32-inch Reflections sash may take completely different balances. If a technician shows up with a generic balance from a supply house, it may fit the channel but not carry the sash weight correctly. The result is a window that either slams shut or won’t stay up. We match parts by the stamp code on the old balance and the sash weight, not by guessing from the frame width.

On the OEM versus aftermarket question: Simonton-branded parts are still available for most series, but lead times run two to three weeks. Quality aftermarket equivalents from manufacturers like Caldwell and Truth are often in stock locally and perform identically when matched correctly. We’ll show you the price difference on paper and let you decide. For the ProLine series specifically, Simonton changed balance vendors around 2012, so we always check the date code on the window before ordering anything.

To identify your window series, look for an etched code in the glass corner or a label on the top of the sash. If it’s faded, the window width and the style of tilt latch are usually enough for us to narrow it down.

Signs Your Simonton Window Installation Is Failing

• The window is heavy to lift or drops when released. This is almost always a failed balance system. In South Florida’s humidity, the coil springs inside the balance corrode faster than they do in drier climates, and once one balance goes, the other follows within months.
• The sash tilts in for cleaning but won’t stay latched. The tilt latches are plastic, and after years of UV exposure from Plantation’s sun, the latch springs get brittle and break. The window will clean fine until one day it just won’t lock back vertical.
• The window locks from the inside but still rattles in the wind. This points to worn sash guides or a failing interlock between the top and bottom sash. On Simonton double-hungs, the interlock is part of the sash extrusion, and if it’s worn, the window will never seal tight without a sash replacement.
• Condensation between the glass panes. That’s a failed seal in the insulated glass unit, not a hardware issue. For Simonton sashes, the glass unit can sometimes be replaced without replacing the entire sash, depending on the series and age.
• A white powder or pitting on the aluminum frame. Salt air from the coast works its way inland, and older Simonton aluminum frames in Plantation show corrosion at the weep holes first. Once the frame gets pitted, the window may not seal properly even with new weatherstripping.

Replacement Cost & What’s Included

Here’s what Simonton window installation costs in Plantation, installed by TruePane, as of this year.

The range depends on two things: which series you have and whether the part is in stock locally or needs to come from Simonton. Parts we stock on the truck are priced at the low end. Special-order parts carry a freight cost we’ll show you on paper before you approve anything. Every job includes removal of the old part, installation, adjustment so the window operates correctly, and cleanup. The labor is covered by our Done Right Promise, and the part carries its own manufacturer warranty, which we register in writing before we leave.

If you’re comparing bids, ask the other company which part they’re installing and whether it’s Simonton-branded or aftermarket. Then ask if the price includes adjusting the window so it locks square. We’ve taken over more than a few Plantation jobs where the first contractor swapped a balance and never checked the window for plumb.

DIY or Call Us?

There are a few things you can safely check before you call. Look at the tilt latches to see if the plastic ears are broken. If they are, that’s a $10 part and a 20-minute fix with a screwdriver. You can also check whether the window is square in the frame by measuring diagonally corner to corner. A window that’s out of square by more than 1/8 inch will wear out new parts faster than you can install them.

What you shouldn’t do is try to remove a Simonton sash with a failed balance without the right tools. The balance still holds tension even when it won’t lift the sash, and releasing it wrong can send a spring-loaded cartridge flying. We’ve seen homeowners put a screwdriver through drywall trying to pry out a stuck balance. That’s not a knock on anyone’s competence. It’s just that the right way requires knowing how to decompress the balance before removal.

If the window is heavy to operate, call (772) 577-2915 and describe what it’s doing. A live person will answer, and we’ll tell you honestly whether it’s a simple latch or a sash that should be replaced. The estimate is free.

FAQs