Therma-Tru Window Replacement Nationwide | TruePane Windows & Doors

Therma-Tru Window Replacement: The Plantation Owner’s Guide

We stock and install Therma-Tru-compatible window replacement parts throughout Plantation, with most sash replacements, balance systems, and weather-seal jobs running between $185 and $520 installed. A technician can usually match your part on the first visit because our trucks carry the common Therma-Tru profiles, balances, and seal kits that fail most often in South Florida humidity. Most homeowners discover the problem the hard way: a window that suddenly drops when opened, a sash that won’t stay up, or condensation you can’t wipe away because the seal is gone and the argon escaped.

Call (772) 577-2915

If you’re reading this, you probably already know the window is not right. Maybe it binds in one corner. Maybe you hear air when the wind comes off the Everglades. The job now is matching the right component to your exact Therma-Tru model so it fits, operates correctly, and doesn’t void whatever warranty remains. That matching work is where we spend most of our time on these calls, and it’s the reason we keep OEM and quality aftermarket parts side by side in the truck rather than forcing one option on every house.

Key Takeaways:

• Therma-Tru window replacement parts in Plantation typically cost $185-$520 installed, depending on whether it’s a balance, seal, sash, or full hardware set.
• We stock common Therma-Tru balances, pivot bars, sweep seals, and sash locks on the truck for same-day match in most cases.
• TruePane is an independent service provider, not affiliated with Therma-Tru. We work on their windows every week and source parts accordingly.
• Both warranty layers get registered in writing, durations stated, before the truck leaves your Plantation driveway.

Which Therma-Tru Models This Applies To

Therma-Tru’s window lines are not one big interchangeable parts bin. The entry-level sliding and double-hung units sold through builder supply houses in the 1990s and early 2000s use a different balance system than the newer Performax and H3 lines, and mixing those parts almost guarantees a window that slams or sticks. Before quoting anything, we identify the window two ways: by the AAMA label on the frame if it’s still legible, and by measuring the sash weight, visible glass size, and the balance channel profile. On older Plantation homes where the sticker faded years ago, we fall back to the measurement method, which works every time.

The OEM-vs-aftermarket decision matters for Therma-Tru specifically because their balance systems changed suppliers at least twice over the last twenty years. A genuine Therma-Tru balance for a 2004 vintage double-hung may not be manufactured anymore, and the aftermarket equivalent from a supplier like Amesbury or Truth Hardware will actually fit better than a new-old-stock part that’s been sitting on a warehouse shelf. We explain this to homeowners plainly when it comes up, because the goal is a window that operates correctly, not a brand label on a part no one will ever see. For seals and weather stripping, we lean toward aftermarket silicone and high-density foam profiles that outlast the original material in Florida heat.

Signs Your Therma-Tru Window Replacement Is Failing

• Sash drops when you open it or won’t stay in place. The balance system has failed. On Therma-Tru double-hungs, this is usually the block-and-tackle or spiral balance, and once the internal spring gives out, no amount of force makes the window stay up.
• Fog between the glass panes. The insulated glass unit seal has failed. Once the desiccant inside is saturated, you get permanent interior condensation in a Plantation summer because outside humidity is pressing against a seal that no longer holds.
• You can feel air moving around the sash when the window is closed. The weather stripping or the sweep seal has compressed and hardened. In a coastal-humidity climate like ours, original Therma-Tru foam seals typically last 5 to 8 years before they lose their memory and stop recovering.
• The lock doesn’t line up or the window binds in one corner. This usually means the frame has settled, the sash has a broken pivot bar, or the install was out of square from day one. We see the last one more often than anyone wants to admit, especially on production-built Plantation subdivisions from the 1990s.
• Visible cracking or warping in the vinyl or composite sash. South Florida UV exposure is brutal on older plastic components. Once the material has gone chalky and brittle, it’s a replacement job, not a repair.

Replacement Cost & What’s Included

Labor and parts pricing in Plantation is straightforward. Here is what a Therma-Tru window replacement typically runs:

• Balance system replacement (per window): $185-$310 installed, depending on size and balance type.
• Weather stripping and seal kit: $95-$175 installed per window.
• Insulated glass unit replacement for a Therma-Tru sash: $220-$480, depending on glass size and whether it’s standard clear, Low-E, or impact-rated.
• Full sash replacement (pre-hung existing frame): $380-$650 for most single-hung and double-hung Therma-Tru models.

Every quote includes the part, the labor to remove and reinstall, cleanup, and the registration of both manufacturer warranty layers in writing before we leave. The Done Right Promise covers the workmanship. If it is not done right, we make it right, no paperwork, no arguing. Most single-sash jobs are completed in one visit because the technician has already identified the part and brought it to the house.

DIY or Call Us?

Here is the honest split. You can safely check a few things yourself: look for the AAMA label on the frame or sash, try to identify the window series from your original purchase paperwork, and measure the visible glass width and height to the nearest eighth of an inch. That information gets us halfway to the right part before we even arrive. What we don’t recommend is removing a sash with a failed balance and trying to swap the spring yourself. On most Therma-Tru double-hungs, the balance is under tension even when the window is down, and an incorrectly released block-and-tackle balance has sent more than one do-it-yourselfer to urgent care with a hand injury. The same goes for insulated glass units, which are heavier than they look and unforgiving when the corner catches a tile floor.

If the part is a simple sweep seal or a sash lock, an experienced homeowner with basic tools can often handle it, and we’ll tell you that on the phone. If it’s a balance, a pivot bar, or a glass unit, call (772) 577-2915 and let us do it right the first time. Dale Kessler has been setting windows in Broward County since he finished the building trades program at McFatter Technical College, and the rule is still the same one he keeps on the whiteboard: if the pane is not true, the job is not done.

FAQs