Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterVLX 80 Awning Window in Plantation, FL | TruePane Windows & Doors
The VLX 80 Awning Window is a top-hinged, outward-opening aluminum window built for South Florida living. In Plantation, where afternoon thunderstorms roll through without warning, this window lets you keep fresh air moving even when it’s raining. That’s the core appeal: ventilation without the water. We’re TruePane Windows & Doors, an authorized installation partner for the company that manufactures the VLX 80. Homeowners across Plantation come to us because they want a premium window installed to a standard that protects the warranty and holds up to hurricane season. Call (772) 577-2915 to talk specs or schedule a measurement.
Product Overview - VLX 80 Awning Window
The VLX 80 belongs to ViewLux’s architectural aluminum line, and it’s the window we recommend most often for Plantation homes that need to breathe. The top-hinged design means the sash opens from the bottom, tilting outward to create a sloped shield. Rain hits the glass and slides off, while air flows in from the sides and bottom. For a city that gets roughly 60 inches of rain a year, that’s not a gimmick. It’s a daily quality-of-life feature.
What makes the VLX 80 stand out from budget aluminum windows is the thermal break. Aluminum conducts heat, which is a problem in South Florida. A thermal break is a non-conductive barrier fitted between the interior and exterior aluminum profiles. It interrupts that heat transfer. The result: the frame stays cooler to the touch, your AC doesn’t work as hard, and condensation is far less likely to form on the inside edge.
The 1.97-inch profile width gives the window a slim, modern sightline without sacrificing structural rigidity. And at 0.079 inches of wall thickness, the extrusion resists flex and twist over decades of daily use. Buyers choose this series for three reasons: they want ventilation during rain, they want energy performance that actually shows up on the power bill, and they want a window that won’t sag or bind after a few humid seasons.
Technical Specifications
- Frame material: Extruded aluminum with thermal break technology, wall thickness of 0.079 inches
- Profile width: 1.97 inches across the frame face
- Operation: Top-hinged awning, outward opening with multi-point locking
- Glass options: Clear, Frosted, Low-E, Tempered, Laminated (including impact-resistant laminated)
- Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
- Screen options: Fixed screen or retractable screen, mounted on the interior side
- Performance compliance: NFRC-rated for energy performance, AAMA 2400/2410 installation standard, AAMA 812-compliant foam sealant on perimeter joints
- Wind load: Engineered to meet Florida building code wind-load requirements for the Plantation area
Performance Features
Thermal Efficiency. The thermal break in the VLX 80 separates the exterior and interior aluminum, cutting heat transfer through the frame itself. NFRC-rated energy performance means you’re getting documented numbers, not a sales pitch. In a Plantation summer, that translates to a cooler interior wall and lower AC runtime.
Acoustic Performance. The same tightly sealed design that keeps water out also keeps sound down. Laminated glass takes it further, reducing noise from traffic, lawn equipment, and the general hum of suburban life. We install these regularly in Plantation homes near busy roads, and the difference is noticeable the first night.
Airtightness & Weather Seal. Weatherstripping around the full sash perimeter prevents air leakage that you’d feel as drafts or see as dust buildup. This window is designed to seal tightly when closed, which matters when you’re running AC ten months of the year.
Waterproofing. The top-hinged design naturally sheds water away from the opening. Pair that with a properly installed perimeter seal, and you get a window that doesn’t leak during the kind of wind-driven rain Plantation sees in summer storms.
Wind Resistance. The VLX 80 is wind-load rated for local climate requirements. With the impact-resistant laminated glass option, it’s a window you can rely on during the worst part of hurricane season, not just the pleasant months.
Security & Hardware. Multi-point locking engages at several points along the sash, not just one center latch. The hardware is built for the corrosion challenge of coastal humidity. This is aluminum, not steel, which means rust isn’t a conversation you’ll be having in five years.
Color & Glass Options
The VLX 80 comes in six finishes. Premium Black and Pure White dominate Plantation’s newer developments and modern renovations, where clean lines and high contrast are the design language. Anodized Silver has an industrial, minimal look that works well on mid-century homes and contemporary builds. Bronze and Champagne read warmer and lean more traditional, pairing nicely with homes built in the 1980s and 1990s that dominate much of Plantation’s established neighborhoods. Teak Wood is a powder-coated woodgrain finish that gives the strength of aluminum with the visual warmth of wood trim, useful when matching existing architectural details without the maintenance of real wood in Florida humidity.
On the glass side, Clear is the standard and most economical. Frosted works well for bathrooms, laundry rooms, and any window facing a neighbor’s wall or a walkway. Low-E glass reflects infrared heat while letting visible light through. It’s the single biggest energy-efficiency upgrade per dollar. Tempered glass is safety glass that shatters into small chunks instead of sharp shards, often required by code for low windows. Laminated glass is what we recommend for any ground-floor window or any room you want to keep secure. The impact-rated laminated option adds storm protection and serious noise reduction.
Installation by TruePane Windows & Doors in Plantation
Here’s the thing about premium windows: a great product installed poorly performs like a cheap one. That’s why we built our installation process around the AAMA 2400/2410 installation standard, which is the recognized benchmark for window and door installation in the United States. We start with a pre-installation inspection of the rough opening. We check the framing condition, measure in three places for width and height, and confirm the existing waterproofing at the opening.
Then we set the window. Level, plumb, and square aren’t buzzwords here. They’re checked with a digital level at every step. A window that’s even 1/8 inch out of square will bind, leak, and eventually fail. We don’t rush that part.
Around the full perimeter, we apply AAMA 812-compliant low-expansion foam sealant. This is the barrier that stops air and water at the joint, and it matters enormously in Plantation’s rainy season. We also install flashing and sealant per manufacturer spec, which is what keeps the warranty intact. Improper perimeter sealing is the number one reason window warranties get voided, and it’s the most common thing we find when we’re called to fix someone else’s install.
Finally, we run a water test on the opening and clean the workspace thoroughly. We don’t leave foam shavings and old caulk in your flower bed. The goal is that in ten years, the only reason you think about this window is when you open it to let the evening breeze through.
Plantation’s climate throws two things at windows: extreme humidity and wind-driven rain. Both punish installs that were sealed “good enough.” We install to a standard that accounts for both.
Frequently Asked Questions - VLX 80 Awning Window
Lead time for the VLX 80 typically runs 3 to 5 weeks from order confirmation, depending on glass type and finish availability. Custom sizes and impact-rated laminated glass can push that to 6 weeks. We confirm the timeline before you sign anything. Call (772) 577-2915 and we’ll give you a current lead time based on your specific configuration.
Yes, in most cases. The VLX 80 with Low-E glass meets the Energy Star criteria for windows installed in Florida, which means it can qualify for federal energy tax credits. We’ll help you confirm eligibility for your specific setup before you order. Call (772) 577-2915 for a free estimate and we’ll walk you through the paperwork.
The VLX 80 carries a manufacturer’s warranty from ViewLux covering the frame, hardware, and glass. The critical detail: the warranty is only valid when the window is installed by an authorized partner to AAMA standards. That’s exactly what we do at TruePane Windows & Doors. Improper installation voids the warranty, which is why ordering this window through an authorized installer like us matters.
Yes. The VLX 80 is fabricated to your measurements, not cut from stock sizes. We measure every opening individually because most Plantation homes, especially those built before 2000, don’t have perfectly square openings. Custom sizing means the window fits your actual opening, not the nearest standard dimension. Call (772) 577-2915 to schedule a free on-site measurement.
Aluminum frames need very little maintenance. Wipe the frame and track with a damp cloth every few months, and keep the weep holes at the bottom of the frame clear of debris. That’s it. The powder-coated finishes don’t fade, peel, or require repainting. No wood to rot, no vinyl to warp. For homes in Plantation’s humidity, aluminum is about as low-maintenance as a window frame gets.
Get a Quote - VLX 80 Awning Window in Plantation
You’ve got the specs. You’ve got the performance details. The next step is pricing for your specific openings, and that requires a measurement. We offer free on-site measurements and written line-item quotes so you know exactly what you’re paying for. No vague ballparks, no surprise change orders. Call (772) 577-2915 today to schedule your measurement and get a firm quote on the VLX 80 Awning Window.
Written by the team at TruePane Windows & Doors, authorized ViewLux installation partners serving Plantation, FL.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images
