Casement Windows

Casement Windows in Plantation, FL | TruePane Windows & Doors

Casement windows are the side-hinged, crank-operated workhorses of Florida impact glazing. They open outward like a door, press against a full compression seal when closed, and give you the tightest air seal of any operable window style. For Plantation homeowners, that matters twice: once for keeping conditioned air in during July, and again for keeping wind-driven rain out when a named storm tracks through Broward County. TruePane Windows & Doors installs impact-rated casements across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, so your configuration options are broad and your NOA paperwork is real. Call (772) 577-2915 to start a project conversation.

Call (772) 577-2915

Product Overview - Casement Windows

A casement window hangs on side hinges and swings outward using a crank mechanism. When you close it, the sash pulls against the frame and compresses a continuous seal around all four sides. That compression is the whole story. Sliding windows rely on overlapping tracks and weatherstripping to keep water out. A casement, by contrast, physically clamps itself shut. Under hurricane-pressure loading, that mechanical advantage matters more than most people realize.

In Florida hurricane-impact construction, casements are prized for three reasons. First, the full-perimeter seal limits air infiltration, which keeps humidity, dust, and wind-blown debris from sneaking around the sash. Second, the outward swing gives you unobstructed ventilation: no center rail, no fixed panel, just open glass catching the trade breeze from your lanai or side yard. Third, the hardware geometry allows for larger single sashes than many other operable styles, which means more daylight and clearer sightlines.

For Plantation homes built in the Mediterranean Revival, ranch, or mid-century styles common across neighborhoods like Jacaranda Lakes, Plantation Acres, and Lauderdale West, casements read as clean and architectural without shouting. We frame them in aluminum or vinyl, glaze them to your wind zone requirements, and install them square, plumb, and level so the seal line stays true for years.

Technical Specifications

TruePane Windows & Doors supplies casement windows in configurations that match both your architectural goals and your structural requirements. Here’s what you can specify:

• Frame materials: Aluminum or vinyl. Aluminum gives you the narrowest sightlines and is the default choice for most Broward County impact work. Vinyl offers a lower-maintenance thermal break at a friendlier price point.
• Glass options: Laminated impact glass with a PVB interlayer, Low-E insulated glass, tinted glass, or clear glass. Mixing is common: laminated impact glass on the storm-facing elevations, Low-E insulated on the eastern morning-sun walls.
• Finish options: White, almond, bronze, black, and tan. All are factory-applied finishes, not site-painted afterthoughts.
• Screen options: Fixed screens for year-round insect protection, or retractable screens that disappear when you want the view without a mesh layer.
• Operation: Crank-operated with multi-point locking hardware that draws the sash tight against the compression seal.

Hurricane & Compliance Performance

Laminated Impact Glass
The glass in our impact casements is laminated with a PVB (polyvinyl butyral) interlayer. When a projectile strikes the outer lite, the PVB holds the glass fragments in the frame instead of letting them become airborne shrapnel inside your living room. The window may look shattered after impact, but the opening stays sealed.

Miami-Dade NOA / Florida Product Approval
Our casement configurations carry Miami-Dade NOA (Notice of Acceptance) and Florida Product Approval numbers. These are issued per configuration, so the specific number on your quote depends on your size, frame material, and glass selection. We provide the paperwork you need for your Plantation permit submittal.

FBC / HVHZ Compliance
Casements from TruePane Windows & Doors are engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements. Plantation sits inside Broward County’s HVHZ designation, which is the strictest wind-load jurisdiction in the state. We don’t sell non-HVHZ products into this market.

TAS 201 / 202 / 203 Testing Context
HVHZ-rated casements are tested under a specific protocol family: TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. These tests simulate what a debris-laden hurricane actually does to a window: hit it, then pressure-cycle it thousands of times, then try to pry it open.

Design Pressure Matched to Your Wind Zone
We specify design pressures matched to your wind zone, up to +/-100, and never higher. The number on your quote reflects your specific elevation, exposure, and opening size, as calculated per FBC. Over-specifying a window wastes your money. Under-specifying is dangerous. We do the math honestly.

Energy Performance
Low-E and insulated glass options are available on our casement lines. Low-E coatings cut solar heat gain through west and south-facing openings, which matters a lot in a Plantation afternoon. Insulated glass units add a second airspace for better thermal performance on air-conditioned rooms.

Color & Glass Options

Finish selection is where the product starts looking like it belongs on your house. White and almond remain the most common choices in Plantation for good reason: they pair naturally with the stucco walls and barrel-tile roofs that dominate Broward County’s 1970s and 1980s housing stock. Bronze and black have gained ground on contemporary remodels in neighborhoods like Plantation Acres, where black frames against light stucco read as sharp and intentional. Tan works well on homes with earth-toned exteriors or darker roof lines.

On the glass side, clear laminated impact glass is the standard starting point if you don’t have a strong sun problem on that elevation. Tinted glass reduces glare and afternoon heat without a reflective coating. Low-E insulated glass is the right call if the window faces east or west and you’re tired of that wall of heat at 4 p.m. We’ll help you map which glass belongs on which side of the house, because a uniform spec rarely serves a Florida home well.

Installation by TruePane Windows & Doors in Plantation

An impact casement is only as good as the hole it’s placed in. A NOA-rated window installed out of square will bind at the hinge, stress the crank hardware, and leave gaps in the compression seal that undermine the entire point of the product. This is why we handle installation ourselves and follow a defined process on every job in Plantation.

We start with a pre-install inspection of the rough opening. We check for rot, termite damage, out-of-plane framing, and any existing water intrusion around the old window. If the opening isn’t structurally sound, the new window can’t perform. We fix the opening first or we tell you before we start, not after we’ve already cut anything out.

Then we set the frame level, plumb, and square, shimming as required to keep the side hinges in perfect alignment. The perimeter gets sealed with AAMA 812 low-expansion foam sealant, and the installation follows AAMA 2400/2410 practice for the flashing and integration details. After the sash goes in, we cycle the crank through its full range, check the compression seal line around the entire frame, and run a water test on the exterior. Cleanup happens the same day. Your Plantation permit package includes the NOA or Florida Product Approval documentation specific to your configuration, and we know what Broward County plan reviewers expect to see.

Frequently Asked Questions - Casement Windows

Get a Quote - Casement Windows in Plantation

If you’re replacing windows in Plantation, the time to nail down your casement configuration and your NOA paperwork is before you file the permit, not after. We’ll measure your openings, calculate design pressures, walk through glass and finish options, and give you a line-item quote that stands up to plan review. Call TruePane Windows & Doors at (772) 577-2915 to schedule your free on-site measurement.

Written by the team at TruePane Windows & Doors, serving Plantation, FL with hurricane-impact window and door installations across all major Florida product approval lines.