Entry Doors

Entry Doors in Plantation, FL | TruePane Windows & Doors

An entry door does two jobs in Plantation. It has to look like the front of your home, and it has to hold when a hurricane pushes on it. TruePane Windows & Doors installs Therma-Tru fiberglass and steel entry door systems that do both. We’ve been setting impact-rated doors in Plantation long enough to know that the frame matters as much as the slab, and that a door that looks good but leaks air or flexes under load isn’t doing its job. If you’re replacing a front door, a side entry, or a rear door off the patio, call (772) 577-2915 and we’ll walk you through the options and get you a written quote.

Call (772) 577-2915

Product Overview - Entry Doors

Our impact entry doors are built on Therma-Tru fiberglass and steel chassis, which means the core of the door won’t warp, twist, or swell the way a wood door does in South Florida humidity. That’s the first thing we tell homeowners in Plantation: the material choice is about longevity, not just looks. Fiberglass gives you a woodgrain texture that takes paint beautifully but doesn’t absorb moisture. Steel gives you a tighter, denser feel and a slightly slimmer profile for the same strength.

What makes these doors different from a standard builder-grade unit is the engineering behind the rating. The slab, the frame, the hinges, and the hardware all work as one system. When we order a Therma-Tru impact door for a Plantation home, the entire assembly is spec’d to the wind zone where the house sits. That means the design pressure rating on the door matches what the building code requires for that particular lot, not just a generic coastal number. The door is tested and labeled as a complete opening, which is what a permit reviewer in a High-Velocity Hurricane Zone wants to see.

You get factory-finished color options or paint-grade woodgrain if you’d rather match a specific trim color on site. Either way, the curb appeal holds up – these don’t look like a storm door bolted onto a house. They look like an entry door that happens to be built for Florida.

Technical Specifications

• Frame materials: Fiberglass or steel, depending on the look and profile you want
• Maximum width: Up to 48 inches for most configurations
• Glass options: Decorative impact glass insert, Low-E insulated glass insert, or solid panel with no glass
• Finish options: White, black, bronze, or paintable woodgrain texture
• Impact compliance: Design pressures matched to your wind zone, up to +/-100, never higher
• Documentation: Miami-Dade NOA and Florida Product Approval numbers available per configuration

TruePane Windows & Doors installs these systems across our Therma-Tru lines throughout Plantation and the surrounding Broward County area.

Hurricane & Compliance Performance

Laminated Impact Glass

When the door includes a glass insert, that glass is laminated with a PVB (polyvinyl butyral) interlayer. If debris hits the glass, the PVB holds the broken pieces in the frame instead of letting them blow into your living room. The door keeps its structural integrity even with the glass damaged, which buys you time through the storm.

Miami-Dade NOA / Florida Product Approval

Every configuration we order for Plantation homes carries the appropriate NOA or Florida Product Approval number. These are issued per configuration, so the specific door you choose gets its own documentation. We’ll verify the exact approval number on your quote so your permit package is clean.

FBC / HVHZ Compliance

These doors are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. HVHZ applies to most of Broward County, including Plantation, and it’s the strictest wind-load standard in the state. The door system is designed from the start to meet that code, not retrofitted to it.

TAS 201 / 202 / 203 Testing Context

HVHZ-rated products are tested under a specific protocol family: TAS 201 covers large-missile impact, TAS 202 covers cyclic wind-pressure loading, and TAS 203 covers forced-entry resistance. These are the tests that simulate what a door actually endures during a hurricane, and our impact entry doors are built within that framework.

Design Pressure for Your Wind Zone

Design pressures are matched to the wind zone of the home, up to +/-100, never higher. We don’t oversell a rating you don’t need, and we wouldn’t sell you a door that falls short of what your specific Plantation lot requires. The right DP rating comes from the wind zone calculation, and we order accordingly.

Energy Performance

For homeowners who want the impact door to also help with cooling costs, Low-E insulated glass inserts are available. Low-E cuts solar heat gain through the glass, which matters in Plantation where west-facing entryways take direct afternoon sun. You get the impact rating and the energy performance in one door.

Color & Glass Options

Plantation homes lean toward a few distinct architectural styles, and the finish on your entry door should fit the house. White and black are the workhorses here – white suits the coastal and Key West-inspired elevations you see all over Plantation Acres, while black gives a clean contrast on Mediterranean and modern builds. Bronze works well on homes with darker roof tiles or bronze window frames, and it hides dust and water spots better than lighter colors.

The paintable woodgrain fiberglass option is the right call if you’re matching a specific paint color, whether that’s a deep navy, a muted gray-green, or a custom shade your HOA approved. It gives you the texture and finish flexibility of wood without the warping and moisture issues we see with real wood doors in South Florida.

On the glass side, a solid panel door gives you the maximum impact resistance and the most privacy, and it’s the right choice for rear entries or side doors facing a utility area. A decorative impact glass insert opens up the entry with natural light and gives the front elevation more presence, and Low-E insulated glass adds the energy performance benefit we touched on above.

Installation by TruePane Windows & Doors in Plantation

An impact-rated entry door is only as good as the installation around it. We’ve pulled out doors in Plantation where the slab was rated for the right design pressure but the perimeter seal was sloppy, the frame wasn’t square, and air and water were getting through the rough opening. That’s why we install every entry door to AAMA 2400/2410 practice, which is the industry standard for proper installation of fenestration products in commercial and residential applications. That’s not a glazing certification claim – it’s a description of how our installers actually do the work.

Our process starts with a pre-install inspection of the rough opening. We check the condition of the framing, the sill, and the weather barrier before we order anything, because what’s behind the door is as important as the door itself. We then set the unit level, plumb, and square, shimming precisely so the frame doesn’t rack once the hardware is hung.

We seal the perimeter with AAMA 812 low-expansion foam sealant, which fills gaps without distorting the frame. After the door is set, we run water on the exterior and check the interior for any trace of moisture. The final step is making sure the permit documentation matches the installed product exactly, which matters in an HVHZ jurisdiction like Plantation where the building department will inspect the installation against the approved drawings.

In Plantation specifically, we pay attention to coastal exposure. Homes closer to the eastern edge of the city catch more wind than homes further west, and the design pressure requirement reflects that. The permit process for an entry door replacement is straightforward when the documentation is right, and we make sure the NOA or Florida Product Approval number on your quote matches the door we actually set.

Frequently Asked Questions - Entry Doors

Get a Quote - Entry Doors in Plantation

If you’re ready to replace your entry door, start with a measurement. We’ll come out to your Plantation home, assess the opening, confirm the wind zone requirements, and give you a written quote with the exact configuration and documentation you need. Call (772) 577-2915 to schedule your free on-site measurement. We’ll help you pick the door that’s right for your house and install it like it’s our own.

Written by the team at TruePane Windows & Doors, serving Plantation, FL and the surrounding Broward County area.