Single Hung Windows

Single Hung Windows in Plantation, FL | TruePane Windows & Doors

Single hung windows are the workhorse of Florida impact-rated replacement glazing: a fixed upper sash up top, and an operable lower sash below, both glazed in laminated impact glass. If you own a home in Plantation and you’re still looking at original builder-grade single pane windows, this is the profile you’ll most likely be quoted, and for good reason. It’s cost-effective, it’s code-compliant when specified correctly, and it fits the architectural language of most Florida ranch homes, Mediterranean-style houses, and newer concrete-block construction. TruePane Windows & Doors supplies and installs single hung windows across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines. We handle the measuring, the permitting paperwork, the install, and the final inspection. Call (772) 577-2915 to get a free on-site measurement started.

Call (772) 577-2915

Product Overview - Single Hung Windows

A single hung window has one moving part: the bottom sash. The top sash stays fixed, which reduces the number of moving joints compared to a double hung, and that’s part of what makes this profile so common in hurricane-prone construction. Fewer operable joints means fewer points where wind-driven rain and air pressure can work their way in. In Plantation, where we’re a few miles inland from the Atlantic but still squarely inside a High-Velocity Hurricane Zone, that matters.

The operable lower sash rides in a frame that can be aluminum or vinyl, depending on the product line and your home’s existing openings. The glass is laminated impact glass with a PVB interlayer, not tempered-only glass, and not annealed glass. That interlayer is what holds the pane in the frame when a branch or roof tile hits it at storm speed. The window still breaks, but it doesn’t shatter into your living room, and it keeps the building envelope closed so the wind doesn’t pressurize the house and lift the roof.

Architecturally, single hungs are a natural fit for the one-story and two-story homes you see across Plantation Acres, Jacaranda, Fountain Springs, and the older streets off Broward Boulevard. They’re clean-looking, they take a half screen or a full screen, and they don’t change the look of the house the way a casement or a horizontal roller sometimes can. It’s a quiet, low-profile update that does a serious structural job. TruePane Windows & Doors installs these every week across Broward County, and our crews know the specific wind zone and code requirements that apply to each Plantation neighborhood.

Technical Specifications

• Frame materials: Aluminum or vinyl, depending on product line and opening size
• Glass types: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, clear glass
• Finish colors: White, almond, bronze, black, tan
• Screen options: Half screen, full screen
• Design pressure: Matched to your specific wind zone, up to +/-100, never higher
• Compliance: Miami-Dade NOA and Florida Product Approval numbers issued per configuration; engineered to FBC HVHZ requirements

Each configuration is quoted with its own approval documentation. We don’t sell a generic “impact window.” We sell a specific window with a specific set of approval numbers that match the size, glass package, and frame material you’re buying. If you need a submittal package for a Plantation building permit, we’ll put it together for you.

Hurricane & Compliance Performance

Laminated Impact Glass
The core of the product is laminated glass with a PVB interlayer. Under impact, the glass cracks but the interlayer holds the pane together and keeps it in the frame. That’s the difference between a window that breaks and a window that protects. In a Plantation storm, a broken window that stays in place is doing its job. A broken window that falls out has turned your house into a wind tunnel.

Miami-Dade NOA / Florida Product Approval
Every configuration we quote carries a Miami-Dade Notice of Acceptance or Florida Product Approval number, issued per specific size and glass package. These aren’t generic marketing stamps. They’re the documents your Plantation building department will ask for when we pull the permit. You’ll see the exact numbers on your quote.

FBC / HVHZ Compliance
The windows are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. Plantation sits inside the HVHZ, which is the stricter of Florida’s two wind design zones. That means every component, from the frame to the hardware to the glass make-up, is designed for the pressure cycling that happens when a hurricane sits over Broward County for hours.

TAS 201 / 202 / 203 Testing Context
HVHZ-rated products are tested under a specific protocol family: TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. The 201 test fires a nine-pound 2×4 at the glass. The 202 test cycles pressure against the window thousands of times. The 203 test checks that after all of that, someone still can’t kick the sash in from outside.

Design Pressure Matched to Your Wind Zone
Design pressure is the structural rating that tells you how much wind force the window can take before the frame or glass fails. We spec each opening to the wind zone it sits in, up to +/-100. We never over-spec. A window rated for a higher DP than the opening requires costs you money you don’t need to spend, and we’re not in the business of padding quotes.

Energy Performance
Low-E and insulated glass options are available for single hung windows. Low-E reduces solar heat gain through the glass, which matters on the west-facing walls of Plantation homes that take afternoon sun. Insulated glass adds an air space between two panes, improving thermal performance compared to a single laminate. We’ll help you match the glass package to the exposure of each wall.

Color & Glass Options

Single hung windows from TruePane Windows & Doors come in five finish colors: white, almond, bronze, black, and tan. In Plantation, the choice usually comes down to the exterior style of the house. White and almond work best on the classic Florida ranches and older CBS homes that make up much of the city’s housing stock. Bronze and black read more contemporary and are increasingly popular on newer build-outs and remodels east of University Drive. Tan splits the difference and blends well on Mediterranean-style elevations with barrel tile roofs.

Glass selection is a functional decision more than a cosmetic one. Clear laminated impact glass is the no-frills option: maximum visible light, code compliance, and the PVB interlayer doing its job. Tinted glass knocks down glare and adds a little daytime privacy, which is useful on bedrooms that face a neighbor’s wall. Low-E insulated glass is the pick for homeowners who want to manage the heat load without giving up natural light. It’s the package we recommend for large west-facing windows in Plantation, where the afternoon sun is the real energy enemy. Whatever you choose, every glass option on this product carries the impact rating. You’re never trading protection for efficiency.

Installation by TruePane Windows & Doors in Plantation

A window is only as good as the opening it’s set into. We see this all the time in Plantation: a homeowner buys a genuinely good impact-rated window, and a rushed crew slaps it into an out-of-square opening with the wrong sealant, and now the window leaks and the NOA documentation doesn’t mean much because the system was installed wrong. An impact window is a system. The approval number applies to the window as installed, which is why the installation practice matters as much as the product.

Our process starts with a pre-install inspection of every opening. We check for rotted buck, out-of-level sills, settling cracks in the CBS, and existing water intrusion issues. We don’t install over rot. We fix the opening first. Then we set the window level, plumb, and square, using shims where needed, so the sash travels correctly and the weatherstripping engages evenly. The perimeter gets an AAMA 812 low-expansion foam sealant, which does two jobs: it seals the gap and it won’t bow the frame like a high-expansion foam will. Installation practice follows AAMA 2400/2410 standards.

Plantation-specific considerations come up on nearly every job. Homes on the east side of the city catch more coastal wind exposure than homes further west, and the wind zone calculation changes the design pressure requirement. Permitting here goes through the City of Plantation Building Department, and an HVHZ jurisdiction will require the Florida Product Approval or Miami-Dade NOA documentation for the windows you’re installing. We handle that submittal. After the windows are set, we run a water test, clean up the job site, and walk the property with you. If anything looks off, we fix it before we call the job done.

Frequently Asked Questions - Single Hung Windows

Get a Quote - Single Hung Windows in Plantation

If you’re pricing single hung windows for a Plantation home, the fastest way to get an accurate number is a free on-site measurement. We’ll spec every opening, pull the approval documentation, and put a written line-item quote in your hands. No pressure, no change orders once we start. Call (772) 577-2915 to schedule your free estimate.