Sliding Glass & Patio Doors

Sliding Glass & Patio Doors in Plantation, FL | TruePane Windows & Doors

Sliding glass and patio doors do more than connect a living room to a lanai. In Plantation, they’re a structural decision. Our impact-rated sliding door systems use laminated glass panels on a reinforced track, engineered to the same wind-zone design pressure as our window lines from PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass. What that means for your home is a wide opening that doesn’t compromise the building envelope when a storm rolls through Broward County. TruePane Windows & Doors installs these systems across Plantation with a level, plumb, square discipline that protects the rating. Call (772) 577-2915 to talk through sizes, glass packages, and a free measurement.

Call (772) 577-2915

Product Overview - Sliding Glass & Patio Doors

Sliding glass and patio doors are the largest operable openings in most Florida homes, and that’s exactly why they demand the most engineering discipline. In hurricane-prone construction, a 12-foot span of glass has to perform as a wall, not just a door. Our impact series is built around laminated glass panels riding on a reinforced track, so the entire assembly holds its design pressure as a unit.

Architecturally, these systems fit where a hinged door would eat too much floor space: great rooms opening to pools, primary suites with balcony access, kitchens stepping out to summer entertaining areas. Plantation homes built in the 70s and 80s often have original sliding doors that were never rated for what today’s Florida Building Code requires. Replacement is where we spend most of our time.

The frames come in aluminum or vinyl depending on the opening size and exposure. Aluminum carries larger spans with thinner sightlines. Vinyl offers thermal performance and a softer aesthetic on smaller openings. Both get the same laminated glass packages and the same installation care from our crews. We pull NOA documentation per configuration so your Plantation permit package is complete before we ever set the first screw.

Technical Specifications

• Frame materials: Extruded aluminum or multi-chamber vinyl, selected by span and exposure.
• Maximum size: Single panel systems up to 12 feet wide in select configurations.
• Track configurations: 2-track for one sliding panel plus fixed panel; 3-track for two sliding panels on a shared opening.
• Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, clear glass.
• Finish options: White, Almond, Bronze, Black, Tan - powder-coated or factory-applied per manufacturer line.
• Screen options: Retractable screen that disappears into the frame, or conventional sliding screen on a separate track.
• Design pressure: Matched to your Plantation wind zone, up to +/-100. Never higher than the opening requires.

Every configuration we quote carries its own Miami-Dade NOA or Florida Product Approval number. We verify it on your specific quote, because a 6-foot door in a gable-end wall has different documentation than a 12-foot span on an exposed second-floor terrace.

Hurricane & Compliance Performance

Laminated Impact Glass. Two panes of glass bonded to a PVB (polyvinyl butyral) interlayer. When debris hits, the glass fractures but stays in the frame. The opening remains sealed, which keeps wind and water from pressurizing your home. This is the core of what makes these doors impact-rated in the first place.

Miami-Dade NOA / Florida Product Approval. Every configuration carries a Notice of Acceptance or Florida Product Approval number issued for that exact size, glass type, and frame combination. We pull the correct document for your specific quote so the permit submittal is clean. If a configuration doesn’t have an NOA, we won’t quote it.

FBC / HVHZ Compliance. These doors are engineered to the Florida Building Code High-Velocity Hurricane Zone requirements. HVHZ is the strictest wind-borne debris standard in the state, and Plantation falls under it. The product, the anchoring, and the installation all have to work together. We treat them as one system.

TAS 201 / 202 / 203 Testing Context. HVHZ-rated products are tested under a specific protocol family. TAS 201 is the large-missile impact test. TAS 202 is cyclic wind-pressure loading: the door gets hit, then has to survive pressure cycling that simulates a storm passing over. TAS 203 covers forced-entry resistance. This is the testing battery these sliding doors are built around.

Design Pressure for Your Wind Zone. Design pressure is matched to the wind zone where your Plantation home sits, up to +/-100. Never higher, because over-engineering a door past what the opening needs adds cost without adding protection. We calculate the required DP from your exact location, not a generic county map.

Energy Performance. Low-E and insulated glass options are available for openings that take direct afternoon sun. A west-facing patio door in Plantation will cook a living room without Low-E. We spec the glass package to the orientation of the wall, not just the minimum code requirement.

Color & Glass Options

The finish palette for our sliding glass and patio doors is White, Almond, Bronze, Black, and Tan. Almond and Tan blend into the warm stucco tones common in Plantation’s Mediterranean-style neighborhoods like Jacaranda and Plantation Acres. Bronze and Black give a contemporary edge to newer builds and remodeled mid-century homes east of University Drive. White stays a classic on coastal-inspired homes with light trim.

Glass selection is about three things: impact, heat, and glare. Laminated impact glass with the PVB interlayer is the non-negotiable base. From there, Low-E insulated glass cuts heat gain on south and west exposures. Tinted glass handles glare on doors that face the pool all afternoon. Clear glass is the cleanest look when you want zero color shift from inside looking out. We’ll walk you through the trade-offs for your specific wall orientation before you commit to a package.

Installation by TruePane Windows & Doors in Plantation

An impact sliding door is only as good as the opening it sits in. We’ve torn out plenty of HVHZ-rated doors in Plantation that were installed wrong: shimmed uneven, sealed with the wrong product, anchored with the wrong fastener pattern. The NOA rating doesn’t survive a sloppy install.

Our process starts with a pre-install inspection of the rough opening. We check the header, the king studs, the sill condition. We check for rot, termite damage, and out-of-square framing before the new door ever arrives. Then we set the frame level, plumb, and square, per AAMA 2400/2410 installation practice. The perimeter gets AAMA 812 low-expansion foam sealant, which seals without bowing the frame. Anchoring follows the manufacturer’s approved schedule for the NOA configuration. Then we run a water test on the sill and threshold before trim goes back on.

Plantation sits in an HVHZ jurisdiction, which means permits and inspections are part of every door replacement. We handle the product approval documentation on your permit package and schedule the inspection once the work is done. Cleanup includes hauling the old door and any concrete or stucco debris. You’re left with a working door and a signed-off permit.

Frequently Asked Questions - Sliding Glass & Patio Doors

What wind zone / design pressure is the Sliding Glass & Patio Doors rated for? Design pressure is matched to the specific wind zone where your Plantation home sits, up to +/-100, and never higher than your opening requires. We calculate the required DP from your exact address and exposure, then quote the configuration that meets it. Call (772) 577-2915 and we’ll pull the wind zone for your street.

What is the lead time? Lead time runs roughly 4 to 8 weeks from final sign-off, depending on the manufacturer line, frame material, glass package, and finish. Custom sizes and 3-track configurations tend toward the longer end. We lock the order only after your permit documents are confirmed, so the clock starts clean. Call us for a current estimate on the configuration you’re considering.

Does it require a Miami-Dade NOA or Florida Product Approval submittal for my permit? Yes. Every configuration we install carries its own NOA or Florida Product Approval number, and the correct document has to go into your Plantation permit submittal. We handle that documentation as part of the quote, so the permit package is complete before installation is scheduled. If the configuration you want doesn’t have the right approval, we won’t sell it to you.

Can I customize the size or configuration? Yes, within the product’s tested range. 2-track and 3-track layouts, panel widths up to the tested span, and your choice of glass and finish options. What you can’t do is build a custom size that falls outside the tested NOA envelope, because that would void the rating. If you describe the opening, we’ll tell you what’s possible and what isn’t.

How do I maintain the frame? Keep the bottom track clear of sand and debris, which is a constant task in Plantation with our soil and wind. Rinse the track with water and wipe the sill dry. Lubricate rollers once a year with a dry silicone spray. Inspect the perimeter sealant annually and recaulk if you see gaps. That’s the whole routine.

Get a Quote - Sliding Glass & Patio Doors in Plantation

If you’re replacing an old slider or planning a new opening, the right first step is a free on-site measurement. We’ll check your rough opening, pull your wind zone, and quote the exact configuration with its NOA documentation. Call TruePane Windows & Doors at (772) 577-2915 to schedule your free estimate in Plantation.

Written by the team at TruePane Windows & Doors, serving Plantation, FL with hurricane-impact window and door installations.