Custom Windows & Doors in Plantation - Free In-Home Measure, Written Price

Trusted Custom Windows & Doors for Plantation Homeowners

A custom window or door job in Plantation, FL typically runs between $900 and $4,800 per opening depending on size, glass package, and frame material, with architectural shapes and oversized panels landing toward the higher end. We’ve been setting windows and doors in Broward County since 2008, and Dale Kessler founded TruePane in 2008 because he was tired of seeing out-of-true installs and voided warranties on other companies’ work. If you need our Custom Windows & Doors in Plantation, call (772) 577-2915 and a live person answers, any hour, any day.

Call (772) 577-2915

What you’re buying with custom work isn’t just glass in a frame. It’s an opening that has to be measured twice, ordered exactly, set level, flashed correctly, and sealed so it stays true through hurricane season and ten summers of afternoon storms. We treat every custom opening that way, and we put it in writing with the Keystone Standard: both manufacturer warranty layers registered before our truck leaves your driveway, durations stated plainly, and our Done Right Promise behind the labor.

Key Takeaways

• Custom windows and doors in Plantation generally cost $900-$4,800 per opening, with shape, size, and glass driving the range.
• TruePane installs and services custom work for Andersen, Pella, Marvin, and Milgard, plus a dozen other manufacturer lines.
• Every job gets both manufacturer warranty layers registered in writing and a Done Right Promise on labor.
• A live person answers (772) 577-2915 24/7, not a voicemail tree or a callback form.

What Our Custom Windows & Doors Service Includes

Best Custom Windows & Doors in Plantation, FL cover a lot of ground. Some houses need an arched window to match the original 1970s elevation. Some need a storefront re-glazed after a break-in on University Drive. Some need an eight-foot sliding glass wall that opens onto a lanai. We handle all of it with the same rule on the board: if the pane is not true, the job is not done.

Custom Shape Windows

Custom shape windows are the circles, half-rounds, trapezoids, eyebrow arches, and clipped-corner units that don’t match any stock size. In Plantation, we see these most often in mid-century ranches and newer custom builds where a builder framed an opening around an idea instead of a catalog number. We measure every radius and angle twice, order the unit from the manufacturer with exact dimensions, and set it so the reveal is even all the way around. A round window that’s off by a quarter inch looks wrong from the street every single day. Ours don’t.

Commercial Storefront Glazing

Commercial storefront glazing is the aluminum-framed glass you see on retail storefronts, office lobbies, and restaurant entryways along Broward Boulevard and State Road 7. Custom Windows & Doors - Fort Lauderdale and Plantation businesses call us when a door’s been kicked in, a panel has stress-cracked, or the original framing has sagged so the door drags against the sill. We replace insulated glass units and rework framing so the door swings clean and the lock catches without a shove. The job gets done in one visit when the opening is standard, and we quote it before we start so there are no surprises on the invoice.

Curtain Wall Systems

Curtain wall systems are the non-structural glass assemblies that cover the face of larger commercial buildings, usually spanning floor to floor. They keep water out and conditioned air in, and when a seal fails in South Florida humidity, the condensation shows up inside the mullions and people start calling. TruePane reglazes curtain wall panels, replaces failed gaskets, and pulls and resets warped or leaking sections. We come out, assess the opening, and tell you straight what can be repaired and what should be replaced. No upsell, no fear talk, just numbers on paper.

Architectural Grilles & SDLs

Architectural grilles and simulated divided lites, called SDLs in the trade, are the bars that give a window its traditional Colonial or Craftsman look while the glass underneath stays one solid insulated unit. We order them from manufacturers like Marvin and Andersen to match the width and profile of the original grilles, which matters when you’re replacing one window on the front of a house and the neighbor can see the difference from the sidewalk. We also install true divided lites for homeowners who want the real thing, with individual panes set in a muntin frame. Both get quoted side by side on paper so you see exactly what each option costs.

Oversized Glass Panels

Oversized glass panels are anything beyond the standard stock sizes, usually starting around 40 square feet and going up from there. In Plantation, these show up as floor-to-ceiling windows on lakefront homes, giant sliding doors, and picture windows framing a backyard pool. These panels weigh hundreds of pounds and require a setting crew that knows how to handle glass without torquing it, because a stress crack from a bad lift doesn’t show up until the panel’s been in the opening for a month. We bring the right equipment, the right number of hands, and we set the panel once. Then we stand behind it.

Brands We Service for Custom Windows & Doors

We’re an authorized installer for more than a dozen manufacturer lines are the names we quote most often for custom residential work in Plantation. Andersen, for example, we know from the inside out: their frame joinery, their hardware mounting, their glass performance codes, and where to source exact-match replacement parts for units that are still under warranty. When a homeowner has a warped Andersen French door or an old crank-out window that won’t seat, we can usually repair it without replacing the whole unit, which saves money the customer didn’t expect to keep.

Pella and Marvin are the go-to lines for architectural shapes and SDL grille patterns, because their custom order windows come in more profile options than most other manufacturers offer. Milgard, meanwhile, is a solid workhorse brand we install often for impact windows and fiberglass options. Whether you have one of those makes or any other brand already in your home, we can help you match it, repair it, or replace it. We work on what’s in your wall, not just what’s on our truck.

Signs You Need Custom Windows & Doors Right Now

• Fogging between the panes. When condensation shows up inside an insulated glass unit, the seal has failed and the inert gas that made the window energy-efficient is gone. In Plantation humidity, this shows up as a haze you can’t wipe off either side. The fix is a new glass unit, not a new window, in most cases, and we can tell you which one you need.
• A door that binds or drags in summer. Wood and aluminum both move with heat and humidity, and a door that started dragging in July is telling you the frame or slab has shifted out of square. If you let it go, the hardware wears out and the weatherstripping tears. We square the door so the latch catches cleanly, then check the reveal around all four sides so it stays swinging true.
• Cracked or chipped glass that’s spreading. A small impact chip can turn into a crack running across the pane with the next temperature change. South Florida sun heats one side of the glass harder than the other, and the thermal stress finds the weakest point. If the crack’s growing, call us now. We’ll measure and order the replacement before the pane fails completely.
• Daylight visible around the frame. If you can see light around the edge of a window or door when it’s closed, the weatherstripping’s gone, the frame’s out of square, or the unit was installed wrong in the first place. That gap lets air-conditioned air out and humid air in, and your electric bill shows it. We’ll tell you whether it’s a seal replacement or a re-setting of the frame.
• Hard to operate or won’t open at all. A window that takes two hands to open, or won’t open, is often a balance or crank mechanism issue, not a window issue. But it can also be a frame that’s swollen from water intrusion. We diagnose it on the spot, show you what we found, and quote the repair or replacement honestly.

Our Custom Windows & Doors Process - Step by Step

1. 1
   Call and talk to a person. You call (772) 577-2915 and a live person answers, 24/7. You describe the opening, the problem, or the project, and we set a time to come out. You won’t get a voicemail tree or a regional call center.
2. 2
   On-site measuring and consultation. A background-checked, uniformed technician comes to your home in Plantation and measures every opening twice. We check the rough opening dimensions, the condition of the existing frame, the exposure, and the glass package that’s appropriate for your wall. If there’s a manufacturer line that fits your opening and budget better than another, we’ll quote them side by side on paper.
3. 3
   Written line-item quote. You get a quote with the manufacturer, glass package, hardware, labor, and lead time spelled out. No surprise line items later. If your project needs a permit, we pull it and the inspection gets passed before we call it done.
4. 4
   Installation and warranty registration. On install day, we bring the right crew and equipment for the opening. For oversized panels or second-story work, we bring extra hands and the right rigging. Before the truck leaves your driveway, we register both manufacturer warranty layers in writing with their durations stated. That’s the Keystone Standard.
5. 5
   The Done Right walkthrough. If anything isn’t right after installation, you call us and we make it right within 90 days. No paperwork fight, no arguing. You’re not chasing a subcontractor. You’re calling the company whose name is on the job.

How Much Does Custom Windows & Doors Cost in Plantation?

Custom Windows & Doors Near Plantation - Our Service Area

TruePane is headquartered close enough to Plantation that we’re on site within about an hour for a service call in most cases, and we schedule custom installations around the manufacturer’s lead time plus one day of on-site work. We serve Plantation and the surrounding Broward County cities including Sunrise, Davie, Tamarac, Lauderhill, Lauderdale Lakes, Fort Lauderdale, North Lauderdale, Oakland Park, Wilton Manors, Cooper City, and Dania Beach. If you’re in one of those neighborhoods, we answer the phone and we’ll be there when we say. You can also see our pages for Custom Windows & Doors in Lauderhill and Custom Windows & Doors in Lauderdale Lakes if those are closer to you.

Frequently Asked Questions - Custom Windows & Doors in Plantation

Schedule Your Custom Windows & Doors Service in Plantation Today

You’ve been through a fogged seal or a door that binds. You don’t need a second round of it. Call TruePane Windows & Doors at (772) 577-2915 and talk to a live person who’ll set up your free, no-obligation estimate in Plantation. We quote it square, we set it true, and we stand behind it in writing. That’s the whole deal.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Plantation since 2008.