Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Salt Air Decides the Materials, Not the Schedule
If you’re replacing a door in Hollywood, the ocean is already in the room with you. The salt-laden breeze off the Atlantic eats standard aluminum door frames in ten to fifteen years on beachfront buildings closer than a half-mile to the surf. We’ve pulled corroded jamb anchors out of 1960s condo walls along A1A that had lost their structural bite entirely. That’s why every Hollywood door quote we write starts with the same two questions: is the product carrying a current Miami-Dade NOA, and is the finish rated for marine exposure. If both answers aren’t yes, the door doesn’t belong on your building. Call (772) 577-2915 and we’ll walk you through what that means for your specific building.

Why Hollywood Is a Different Kind of Door Installation Job
Hollywood sits entirely inside Florida’s High Velocity Hurricane Zone, the strictest wind-load and impact-testing standard in the country. Every replacement door, whether it’s on a single-family ranch home near Emerald Hills or a beachfront condo tower along Hollywood Beach, must carry a valid Miami-Dade Notice of Acceptance product approval. Broward County Building Division requires the specific NOA number and edition date printed on the permit application before they’ll accept it. We’ve watched contractors quote and order product without verifying the NOA was current for the exact configuration, then get the permit rejected after the doors were already sitting on a loading dock. That’s a three-week stall nobody planned for.
Then there’s the salt. Direct Atlantic exposure means marine-grade finishes aren’t an upgrade in Hollywood. They’re the baseline. Oceanfront units on Hollywood Beach see standard aluminum frames pit, bind, and lose their weatherstripping seal inside a decade if the product wasn’t specified for a coastal environment. Pair that with HVHZ wind-load requirements and you’ve eliminated most of the standard product lines sold at inland Florida supply houses. The dual requirement, impact-rated plus marine-grade, exists nowhere inland. Not in Davie. Not in Pembroke Pines. In Hollywood, that’s just what a correct door looks like. Our Door Installation team specs every job against that standard from the first site visit.
Our Door Installation Services in Hollywood
Entry and Swing Doors
Your entry door is the one opening in the house you touch every single day. In Hollywood’s older CBS construction, built mostly between the late 1940s and the 1980s, we see original wood and aluminum entry doors that swing through concrete block openings with tolerances that don’t tolerate anything. A door that binds in July, when the humidity peaks, is usually a door that was never shimmed correctly for this climate. We replace entry doors with impact-rated units carrying current NOAs for concrete block substrates, and we specify stainless steel hinges and marine-grade hardware on anything within a mile of the ocean. One entry door replacement in Hollywood typically runs $1,800 to $4,200 installed, depending on slab size and whether the opening needs reframing.

Storm Doors
Storm doors in Hollywood serve two purposes: they add a secondary barrier against wind-driven rain, and they buy you a little more life out of your primary entry door. The important thing here is that a storm door on an HVHZ building is not a substitute for an impact-rated primary door. It’s an extra layer. We install storm doors with tempered safety glass and marine-rated aluminum frames, and we make sure the door’s anchoring method matches the wall substrate. A storm door installed on a Hollywood house runs $600 to $1,500, and we’ll tell you honestly whether your primary door needs replacement first.

Arched and Custom Doors
Hollywood’s original 1950s and 1960s homes have a fair number of arched entries, especially in the Lakes and Hollywood Hills neighborhoods. Those radius tops don’t come off a shelf. We measure every custom door twice, quote the manufacturer’s actual lead time, and confirm the NOA covers the arched configuration before we order anything. Custom arched door projects in Hollywood typically start around $4,000 and can run to $8,000 or more depending on glazing and finish. The work takes two to three days on site, not one afternoon. If a contractor promises you an arched door in a week, they’re ordering it from someone who didn’t check the wind-load calcs.

Bifold and Folding Doors
Folding door systems are growing in Hollywood’s newer builds and in condo remodels where owners want to open up a balcony wall. On an oceanfront high-rise, a bifold door isn’t just a big glass opening. It’s a hurricane-rated structural element that has to handle positive and negative wind pressure at a height where the wind loads are higher than they are at grade. We quote bifold installations in Hollywood between $6,000 and $14,000 depending on panel count, glass package, and whether the header needs structural work. Every quote comes with the NOA number in writing.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hollywood
We’re an authorized installer for more than a dozen manufacturer lines, and for Hollywood’s coastal conditions we most often specify ES Windows for high-rise impact glazing, ECO Window Systems when a condo board needs a budget-conscious marine-grade option, and Andersen for single-family entry and French door work. Saying we stock local parts isn’t a marketing line. We keep the common hardware, weatherstripping, and threshold components for these brands in our South Florida inventory so a warranty callback in Hollywood doesn’t wait on a shipping manifest. You’ll see the manufacturer’s warranty durations on paper, side by side, before you sign anything.
Common Door Installation Problems We See in Hollywood Homes
After years of working door projects up and down the Hollywood corridor, we’ve learned the failure modes that repeat. They’re not random. They follow the salt, the age of the concrete, and the permit office. Here’s what we actually find:

- Corroded jamb anchors on beachfront condos. On a 1960s tower along A1A near Hollywood Beach, we found original jalousie doors with aluminum frames so eaten by salt that the anchors had no bite left in the concrete block. Replacing them meant impact-rated, marine-grade stainless steel hinged doors with a current NOA for CMU, plus a permit re-submission because the first NOA edition had expired. Salt doesn’t stop. It just waits.
- Expired NOA rejections after product delivery. We see this on condo jobs where a contractor quoted a door that carried a valid NOA a year ago. Broward County checks the edition date. If it’s lapsed, the application gets rejected, and the doors sit in a warehouse while someone scrambles. We verify the NOA is current before we order.
- Binding doors on original CBS openings. Concrete block houses from the 1950s and 1960s were framed with whatever tolerance the masons had that week. A door that’s square in the frame but fights you in damp weather usually isn’t the hinges. It’s the rough opening. We reshim and reseal, and we install with anchors speced for block, not wood studs.
- Jalousie and single-pane aluminum doors failing HVHZ standards. Florida’s post-Surfside condominium inspection law, FS 553.899, is pushing a wave of mandatory replacements in Hollywood’s older beachfront towers. Original jalousie doors provide no meaningful hurricane protection and are typically flagged during milestone inspections. If your association is telling you replacement is required, they’re often right.
Pricing for Door Installation in Hollywood, FL
In Hollywood’s market, you’ll pay a real premium for a door that’s correctly speced versus a door that just fits the hole. Here are the numbers we see most often across our service area:
| Door Type | Typical Hollywood Price Range | What Drives the Price |
|---|---|---|
| Standard entry door, non-impact | $800 - $1,800 | Basic slab, standard hardware, inland location |
| Impact-rated entry door with current NOA | $1,800 - $4,200 | HVHZ product, concrete block anchoring, permit fees |
| Storm door, marine-grade frame | $600 - $1,500 | Tempered glass, salt-rated hardware |
| French or double door, impact glazing | $3,500 - $7,000 | Glass package, threshold system, anchoring |
| Arched or custom door with NOA | $4,000 - $8,000+ | Custom fabrication, lead time, structural checks |
| Bifold or folding door system | $6,000 - $14,000 | Panel count, wind-load engineering, header work |
The gap between a standard inland-spec door and a marine-grade impact-rated door in Hollywood is usually $1,200 to $2,500 per opening. And the cheap spec costs you more within a decade when the salt has eaten the frame and the association is telling you to replace it again. We’ll give you a written, line-item quote that shows exactly what you’re paying for. Call (772) 577-2915 to schedule a free estimate.
We Also Serve Cities Near Hollywood
TruePane Windows and Doors serves Hollywood and the surrounding Broward County communities, including Fort Lauderdale, Plantation, Pembroke Pines, and Pompano Beach. If you’re a homeowner in one of those areas researching Door Installation in Hollywood, you’re getting the same coastal-spec discipline and the same backup, because we run our crews across the whole corridor. The salt doesn’t stop at the city line, and neither do we.
Serving Hollywood, FL - Our Local Coverage Area
We’re based in the Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Hollywood
Yes. All of Hollywood is inside the High Velocity Hurricane Zone, regardless of distance from the ocean. Every replacement door must carry a valid Miami-Dade Notice of Acceptance. That’s the rule for a 1950s ranch house near Hollywood Hills just as much as it is for a condo tower on the beach. Call (772) 577-2915 and we’ll confirm the right NOA for your specific building.
Usually because the NOA number on the product didn’t match the exact configuration you were proposing, or the NOA edition date had expired. Broward County Building Division prints the NOA number and edition date on the permit application, and if either one doesn’t match the product being installed, the application gets rejected. We verify the NOA is current and covers the exact size, anchoring method, and wall substrate before we order anything.
On oceanfront buildings within a half-mile of the surf, standard aluminum door frames can fail within 10 to 15 years. That’s pitting on the frame surface, binding hinges, and weatherstripping that no longer seals. Marine-grade finishes and stainless steel hardware extend the life of a door on Hollywood Beach significantly, and for that reason we specify them on any project within a mile of the ocean. The cheap frame costs less now and gets replaced twice.
You can, but the non-impact door still has to be a product approved for use in an HVHZ building, and the permit application will reference the shutter system as the impact protection method. The problem is that many condo associations in Hollywood have their own requirements that go beyond the code minimum, and they often won’t accept a non-impact door at all. Before you buy anything, check your association’s documents and call us. We’ll tell you what your building will actually approve.
Long answer short: likely yes, and soon. Original jalousie and single-pane aluminum doors in Hollywood’s 1960s and 1970s beachfront condos don’t meet current HVHZ impact requirements, and Florida’s post-Surfside milestone inspection law is flagging them on a growing number of buildings. If your association has told you replacement is required, they’re almost certainly following a mandatory inspection report. We replace these with impact-rated, marine-grade doors carrying current NOAs for concrete block, and we’ve done enough of them on A1A buildings to move quickly. Call (772) 577-2915 and we’ll take a look at your building’s specific requirements.
Call TruePane Windows and Doors for Door Installation in Hollywood
Dale Kessler started TruePane out of a simple rule: if the pane is not true, the job is not done. That rule governs every door we install in Hollywood, from a single entry door on a ranch house in Emerald Hills to a full jalousie replacement on a beachfront condo tower. We’re licensed and insured, we background-check every technician who walks through your door, and our quotes come in writing with the NOA number printed on them. You call, a live person answers, and we’ll schedule your free estimate. Call (772) 577-2915 today.
Written by Dale Kessler, Owner at TruePane Windows and Doors, serving Hollywood and the surrounding Broward County communities with the Keystone Standard on every job.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After