Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Door Installation Across Sunrise
Door installation in Sunrise, FL is not a simple swap. Every permitted door here has to meet Broward County’s High-Velocity Hurricane Zone code, which means impact-rated glass, a Miami-Dade Notice of Acceptance or Florida Product Approval, and an inspection pass. We’ve been installing doors in Sunrise long enough to know the two-approval bottleneck that trips up out-of-town crews: the county permit and the condo association’s architectural review board. You need both before a single hinge goes in. Call (772) 577-2915 and we’ll walk you through the exact sequence for your building.
We are Door Installation specialists, and we work the Sunrise market differently than a crew that drives in, hangs a door, and leaves. Sunrise is a planned city with tens of thousands of concrete-block condo units built between the late 1960s and mid-1980s. Sunrise Lakes alone spans four phases. Most of those original doors are single-pane aluminum sliders that don’t meet today’s wind-load requirements. Replacing them correctly means more than picking a pretty door from a showroom. It means knowing what the county inspector will check, what the HOA board will reject, and what your insurer needs in writing. That’s the work we do every week.
Why TruePane Windows & Doors Is Sunrise’s Preferred Door Installation Company
TruePane Windows & Doors has been serving Sunrise homeowners through the same family-operated craft tradition that Dale Kessler built. Dale’s rule hangs over every install: if the pane is not true, the job is not done. That applies to a French door, a pivot door, or a storm door in a Sunrise Lakes Phase II unit where the jamb has shifted a quarter inch since 1974. Our crews measure every opening twice, then check the measurements against the actual door’s spec sheet before ordering. The homeowners we work with in Sunrise tend to have lived in their unit for two decades or more. They remember the last guy who left a binding door and a fogged seal. They don’t want a cheap redo. They want a door that closes square the first time and keeps closing square in August when the humidity swells the frame.
Every TruePane technician is background-checked and uniformed. Every quote is written on paper, side by side, so you can see exactly what a given manufacturer charges for a given door with a given glass package. We never hand you a number and hope you don’t ask what’s behind it. Most single-door replacements in Sunrise take a single visit once the door is on the truck and the approvals are clear. And when the job is done, you get The Keystone Standard in writing: both manufacturer warranty layers registered, durations stated, and our Done Right Promise covering the workmanship. If something is not right, we make it right. No paperwork fights. No fine print.
We answer the phone. That sounds simple, but in Sunrise it matters because so many door jobs start with a failed lock, a broken roller, or a jalousie that won’t shut before a storm watch. A live person picks up 24 hours a day, 7 days a week. Not a voicemail tree, not a callback form. When you call (772) 577-2915, you get someone who can schedule your estimate and answer basic questions on the spot.
Our Door Installation Services in Sunrise
Entry & Swing Doors
A front entry door in Sunrise does more than welcome guests. It’s the first barrier against a 150 mph design wind gust. We install impact-rated entry and swing doors that carry current Miami-Dade NOA or Florida Product Approval documentation. For homeowners in Sunrise Lakes Phase I-IV, that paperwork matters: your association may ask for it, and your windstorm insurer will. We stock and order swing doors across common widths for concrete-block openings, and we check the existing rough opening before we order anything. A swing door sized for a Miami house built in 1995 is not automatically right for a Sunrise Lakes unit built in 1972.

Double & French Doors
Double and French doors are the most common retrofit we do in Sunrise, because so many of the original patio openings are wide sliders that owners want to convert or replace with something that actually seals. A French door carries more hinges, more weatherstripping, and more points of failure than a single swing door. We install double doors with reinforced frames and multi-point locking hardware where the opening width calls for it. In Sunrise, we routinely see French doors that were hung without accounting for the thicker insulated glass unit on the impact-rated panel. The sash binds, the lock will not engage, and the owner is left with a door that won’t pass inspection. We measure to the rough opening, not to the old jamb. That detail is the difference between a door that shuts and a door that needs a sledgehammer by July.

Storm Doors
Storm doors protect the primary entry door from direct rain, salt air, and debris. In Sunrise, the afternoon thunderstorms roll in fast and hit hard from the east. A well-built storm door with a proper sweep and sealed perimeter keeps driven rain out of the jamb and off your primary door’s hardware. We install storm doors with tempered glass, reinforced corners, and closers that hold up to the seasonal gusts. But we’re honest with you: a storm door is not a replacement for an impact-rated entry door. It’s a second layer. If your primary door is original to a 1970s Sunrise condo, the storm door never had the wind rating to be the last line of defense.

Bifold & Folding Doors
Bifold and folding doors open wide across a patio or balcony opening, and in Sunrise that opening still has to meet HVHZ code. We install multi-panel folding doors with interlocking sills and reinforced corner assemblies that carry the right product approvals. For a concrete-block townhome in Sunrise, a folding door is often the largest single opening in the unit. Get it wrong and the whole wall flexes under wind load. Get the track level and the panels aligned, and you have a door that opens with one hand and seals like a vault. Every folding door we quote includes the full NOA or Florida Product Approval paperwork, because your building inspector in Sunrise will ask to see it before sign-off.

Pivot Doors
A pivot door is a statement piece, and in Sunrise it’s a statement that has to stand up to wind-load math. The pivot hinge carries the door’s entire weight at two points instead of along a side jamb, which means the frame has to be anchored into concrete block with serious hardware. We specify pivot doors with engineered headers and reinforced jamb plates, and we verify the rough opening before the door is fabricated. Sunrise homeowners who go with a pivot door usually want something architectural. You should still get a door that closes square and carries a current product approval. We don’t sell pivot doors as decoration. We sell them as a structural assembly.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sunrise
We’re an authorized installer for more than a dozen manufacturer lines, and the ones we spec most often for Sunrise are, ES Windows, and ECO Window Systems. Andersen’s impact-rated French door lines carry the Miami-Dade NOA documentation that Sunrise lakeside condos need for both county and HOA approval. ES Windows builds a fusion-welded frame that holds its shape in the humidity and heat cycles typical in Sunrise. ECO Window Systems gives us a strong mid-price option with current Florida Product Approvals. We quote these brands side by side on paper so you can see the actual price difference, the actual glass package, and the actual warranty duration. We do not stock a single line and try to force every Sunrise home into it.
Common Door Installation Problems We See in Sunrise Homes
- Condo approval lag. A crew shows up with a Broward County permit but no architectural review sign-off from the Sunrise Lakes board, so the door sits in the truck while the HOA’s next meeting is three weeks out. We file both applications on the same morning.
- Non-compliant glass. An installer hangs a cheaper door without a current NOA, and the homeowner discovers at renewal that their windstorm insurer will not cover a Sunrise Lakes unit with a non-approved door. We only install products with valid NOA or Florida Product Approval current to today’s code cycle.
- Binding sashes from mismeasured thermal expansion. A sliding glass door is measured to the old jamb without accounting for the thicker impact-rated insulated glass unit, and the new sash binds and locks won’t engage. We measure to the rough opening and check the slab height.
- Rusted original hardware on concrete-block openings. The original 1970s slider in a Sunrise townhome has a corroded track and worn rollers, and the replacement gets set into a frame that was never properly flashed or anchored. We repair or replace the subframe before the new door goes in.
Pricing for Door Installation in Sunrise, FL
A typical entry or swing door replacement in Sunrise runs $1,800 to $4,200 depending on the door material, glass package, and whether the rough opening needs repair. A double or French door conversion typically runs $3,500 to $7,800 in Sunrise, and a storm door install runs $850 to $1,900. Pivot doors start around $5,500 for a code-compliant opening and go up with size and hardware. Bifold and folding doors for a Sunrise patio or balcony run $6,000 to $14,000 depending on panel count and finish. The factors that move your price are the condition of the rough opening, whether you need impact-rated glass, and which manufacturer line you select. We quote a fixed number in writing before you sign anything, and we line up the brands side by side so you can see exactly what each dollar buys. Call (772) 577-2915 for a free estimate. There’s no charge for us to come to your Sunrise home, take measurements, and put the numbers on paper.
We Also Serve Cities Near Sunrise
If your home is just outside the Sunrise city line, our crews also work in Plantation, Lauderhill, Lauderdale Lakes, and Davie. The same HVHZ code requirements apply across Broward County, and the same approval sequence applies for condo jobs. If you’re in one of those neighboring cities, call the same number and we’ll schedule your estimate. The shortest route to a door that passes inspection is the one that starts with the right measurements and the right paperwork.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Sunrise
Yes, for most units in Sunrise Lakes Phase III you need both a Broward County building permit and a separate architectural review approval from the association. The county permit covers code compliance, and the HOA approval covers frame color, style, and finish consistency. One does not substitute for the other, and the county will not care that your HOA is dragging its feet. That’s why we file both applications at the same time. Call (772) 577-2915 to have us start both tracks for your unit.
Most Sunrise condo associations, including Sunrise Lakes phases, want to see a current Miami-Dade NOA or Florida Product Approval for the specific door model and size being installed, plus a copy of the county permit. Some boards also want the manufacturer’s product data sheet and a photo or sample of the frame finish. We provide the full packet, registered in writing, before the truck leaves your driveway. That’s our Keystone Standard, and it applies on every job.
You almost always need a whole new door. The original aluminum single-pane sliding doors in Sunrise Lakes were never designed to carry a laminated impact-rated glass unit, and the frame will not handle the added weight or the wind-load rating. Replacing just the glass in an old aluminum frame will not get you a current NOA, and it won’t satisfy your insurer or the county inspector. The right move is a full replacement with an impact-rated product. Call (772) 577-2915 and we’ll tell you straight what your opening can take.
It can, but it depends on your carrier and your policy terms. Many Florida windstorm insurers apply impact-rated opening credits when doors and windows carry current Miami-Dade NOA or Florida Product Approval documentation. The key is having the paperwork registered and in the insurer’s hands before renewal. We give you the NOA documentation for your specific door on install day, so you can file it with your agent immediately. Call (772) 577-2915 for a quote and we’ll make sure the paperwork is there.
Plan on two to six weeks from the day we submit the permit to the day the door is installed and inspected, with most of that time waiting on Broward County’s permit timeline and your HOA board’s meeting schedule. The actual install is usually a single day, sometimes two if the rough opening needs work. We build the approval lag into our scheduling from day one, so you don’t get a crew showing up with a door and no permission to hang it. Call (772) 577-2915 and we’ll give you a realistic timeline for your building.
Get Your Sunrise Door Installation Quote
If the door you have does not close square, does not seal against the afternoon storms, or does not have the paperwork your insurer will ask for, it’s time to fix it properly. We serve Sunrise homeowners with written fixed-price quotes, current NOA documentation, and a workmanship promise that actually means something: if it is not done right, we make it right. Call (772) 577-2915 to schedule your free estimate. We’ll measure the opening, explain your options, and hand you a number you can take to the bank. No pressure, no games, no surprises on the bill.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Sunrise since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After