Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Window Replacement Across Pompano Beach
Window replacement in Pompano Beach is not a simple swap. Most of the homes east of Federal Highway are 1950s-1970s concrete-block ranches still carrying original jalousie windows, and those can’t be retrofitted legally under Broward County’s wind code. A typical full-frame impact window replacement in Pompano Beach runs $900-$1,700 per opening depending on size, manufacturer, and marine-grade frame requirements. That’s the honest starting point. If you’re west of Dixie in neighborhoods like Garden Isles or Palm Aire, the price shifts with different setback and permitting rules. Call (772) 577-2915 and we’ll walk the openings with you before anyone quotes a guess.
We’re TruePane Windows & Doors, and we’ve been replacing windows in Pompano Beach long enough to know which houses still have the original aluminum single-track sliders, which blocks flood where after a hard afternoon storm, and which HOA reviews east of A1A will reject a vinyl frame on sight. Our crews work Pompano Beach weekly. We coordinate from our South Florida office in Miami, but the men on your job know the difference between a Pompano Beach CBS ranch and a Fort Lauderdale mid-rise, because they’ve worked both.
Why TruePane Windows & Doors Is Pompano Beach’s Preferred Window Replacement Company
Dale Kessler founded TruePane in 2008 on a rule that still hangs in the shop: if the pane is not true, the job is not done. We’ve held to that since 2008 of combined trade heritage across our crew, and Pompano Beach homeowners call us for the same reasons they called their longtime roofer. We answer the phone. We show up when we say. We write down both warranty layers before the truck leaves your driveway, and we register them in writing, not in a promise.
The homes here demand a certain kind of care. A 1963 CBS ranch off NE 10th Street in Garden Isles is not the same job as a 1998 concrete-frame condo on the Intracoastal. We know both. Our background-checked, uniformed technicians measure every opening twice, quote manufacturer lines side by side on paper, and refuse to shortcut a permit path that will come back to bite you at resale.
We also stand behind the work with a Done Right Promise. If something’s not right, we make it right. No paperwork fights. No fine print. That’s the deal Dale set down from day one, and Pompano Beach homeowners hold us to it.
Our Window Replacement Services in Pompano Beach
Here’s what we actually do in Pompano Beach, day in and day out. Most jobs fall into one of these four categories, though plenty of homes need a combination. You can see the full scope of our Window Replacement work on the service page; what follows is how each applies here on the coast.
Full Frame Replacement
This is the dominant job in Pompano Beach, and it’s rarely optional. Original jalousie windows cannot be retrofitted to meet current HVHZ code, which means the entire frame comes out to the block and a new, impact-rated unit goes in its place. We do full tear-outs on 1950s-1970s CBS ranches east of Federal Highway nearly every week. These jobs include new bucking, flashing, and marine-grade fasteners, because the old aluminum frames are usually pitted beyond reuse from decades of salt air.

Insert Window Replacement
When the existing frame is structurally sound and was installed after Florida’s post-Andrew codes, we can sometimes set a new insert window into the old pocket. This saves money and preserves the interior trim, but it only applies to homes where the current frame still has a valid Miami-Dade NOA. West Pompano Beach subdivisions from the 1980s and 1990s are the more common candidates. We’ll tell you straight if your frame qualifies, because we’re not going to install an insert into a pocket that fails the next inspection.

Storm Window Replacement
Most Pompano Beach homeowners don’t want a storm window added on top of a fragile jalousie. They want the jalousie gone and a code-compliant impact unit in its place. That said, there are specific cases where a storm window makes sense: interior-mounted secondary glazing on a historic facade, or a temporary measure while a full replacement is scheduled. We’ll explain the difference and the cost with a written line-item quote either way.

Energy-Efficient Upgrade
Salt air and Hurricane Alley are not the only concerns here. The same marine environment that rusts hardware also drives utility bills up when single-pane jalousie glazing lets conditioned air pour out. Pompano Beach electric bills in August are brutal. Upgrading to low-E, argon-filled impact glass cuts heat gain noticeably, keeps the AC from running nonstop, and adds a meaningful resale credit in a market where home inspectors flag old fenestration on every transaction. We spec frames in marine-grade aluminum alloy rather than standard aluminum or vinyl, because twenty miles inland is a different calculation than a quarter mile off A1A.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pompano Beach
TruePane is an authorized installer for more than a dozen manufacturer lines, and for Pompano Beach jobs we most often quote, PGT, and ECO Window Systems side by side so you can compare warranty durations and glass packages on paper. We keep standard frame stock and hardware for PGT and Andersen in rotation for Pompano Beach customers, which means faster turnaround when a window fails between quotes and closing. We also work with ES Windows for higher-end coastal projects where the HOA or the homeowner wants a specific aesthetic. You’ll see the manufacturer warranty duration written down next to the workmanship guarantee, every time.
Common Window Replacement Problems We See in Pompano Beach Homes
- Salt-corroded aluminum frames and hardware. Homes within a half mile of the Intracoastal or the ocean see pitting and white oxidation on standard aluminum within five to seven years. The sashes bind, the weatherstripping rots, and the glass seal fails. Marine-grade aluminum alloy and stainless hardware is not an upsell here; it’s the baseline spec.
- Jalousie windows that cannot pass inspection. The 1950s-1970s CBS ranch stock east of Federal Highway still carries original louvered glass. There is no code-compliant retrofit for these. If a home inspector has flagged them, the only legal path is full-frame replacement with impact-rated units carrying a Miami-Dade NOA.
- Fogged double-pane seals on aging condominiums. Along A1A and the Intracoastal corridor, the older condo towers from the 1970s and 1980s have single-track aluminum sliders with failed seals. The fog is not an HVHZ violation by itself, but if the frame is also non-impact rated, the whole assembly has to go before closing on a sale.
- Improperly flashed replacements on low-slab ranch homes. Pompano Beach’s flat, low-slab CBS homes leave little slope to shed water. If the flashing detail around a replacement window is wrong, wind-driven rain pools at the sill and sends rot into the block pocket. We see this most often after cheap installs where the crew flashed against the stucco instead of into the rough opening.
Pricing for Window Replacement in Pompano Beach, FL
A full-frame impact window replacement in Pompano Beach typically runs $900-$1,700 per opening for a standard bedroom window. Larger living-room or sliding-glass openings run $2,200-$4,500. Insert replacements, where the existing frame qualifies, run $600-$1,100 per opening. Energy-efficient upgrades with low-E, argon-filled impact glass generally add $150-$350 per window over the base impact unit. Marine-grade aluminum alloy frames add roughly 10-15% over standard aluminum, and in Pompano Beach east of Federal Highway, that is money well spent. Septic-lot homes west of Dixie Highway may require a county permit and drain-field setback confirmation, which adds $150-$400 in permit coordination depending on the property. Every quote is written, line-item, and fixed. Call (772) 577-2915 for a free estimate, and we’ll put all of this on paper for your exact openings.
We Also Serve Cities Near Pompano Beach
TruePane crews live and work across Broward County. If you’re in Margate, Fort Lauderdale, Plantation, or Coral Springs, we handle Window Replacement in Pompano Beach and the surrounding communities with the same permitting knowledge and warranty practice. Same phone, same crew standard, same Done Right Promise.
Serving Pompano Beach, FL - Our Local Coverage Area
We’re based in the Pompano Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Pompano Beach
You can’t because jalousie frames were never engineered for a laminated impact pane, and no Miami-Dade NOA exists for that retrofit. Pompano Beach is entirely inside Florida’s High-Velocity Hurricane Zone, so every replacement window must carry a Notice of Acceptance. Jalousie frames fail the wind-load and missile-impact test requirements outright. The only legal fix is a full-frame teardown and a new impact-rated unit. Call (772) 577-2915 and we’ll show you the NOA paperwork for the units we’d put in.
No. Every property in Pompano Beach, east or west, falls under the same HVHZ rules and the same Broward County product approval requirement. What changes west of Federal Highway is the building stock and sometimes the property type. Many newer subdivisions have frames eligible for insert replacements, and many older septic-lot homes need county rather than city permit coordination. The wind-load standard does not relax.
Salt air corrodes standard aluminum and hardware in five to seven years on Pompano Beach homes near the ocean or Intracoastal. You’ll see pitting, white oxidation, binding sashes, and failed seals. The fix is marine-grade aluminum alloy frames with stainless steel hardware, which resists chloride corrosion much longer than the mill-finish aluminum used on inland homes. We spec marine-grade as standard east of Federal Highway because it’s the honest answer here.
Fogged glass itself is not an HVHZ violation; it’s a failed seal. But if the window assembly is non-impact rated, the inspector will flag that as a code matter, and that does need to be resolved before closing. In Pompano Beach’s older east-side neighborhoods, fogged single-track sliders are usually non-impact and original, which means full replacement. Call (772) 577-2915 and we’ll tell you exactly which situation you’re in before you negotiate with the seller.
Yes, generally. On septic-lot homes west of Dixie Highway, the county health department reviews window projects that change rough openings adjacent to a drain field, and the county building department issues the permit. We coordinate that directly with the county, confirm the setback, and pull the permit before we start. It adds a few hundred dollars and a few days, and it prevents a failed final inspection.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Pompano Beach since the company’s founding in 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After