Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Southwest Ranches
Custom window and door work in Southwest Ranches is not the same as it is in Weston or Pembroke Pines. The homes here sit on multi-acre equestrian lots, and most were built between the 1970s and early 2000s with rough openings that match no standard size sheet. Our team works those measurements every week, so if you’re replacing original single-pane windows or fitting a heavy sliding barn door, we already know what your house is asking for. Call (772) 577-2915 and a live person answers. We’ll schedule a measurement visit that works around your horses, your paddocks, and your time.
Why TruePane Windows & Doors Is Southwest Ranches’s Preferred Custom Windows & Doors Company
We’re a second-generation glazier’s shop, founded by Dale Kessler in 2008, and we’ve spent the years since on a simple rule: if the pane is not true, the job is not done. Southwest Ranches homeowners call us because the work here is particular. Non-standard rough openings, HVHZ wind pressures, fine dust from equestrian paths, and a town that expects craftsmanship over shortcuts. We measure every opening twice. We quote manufacturer lines side by side on paper so you see exactly what you’re buying. We register both warranty layers in writing before the truck leaves the driveway. That’s The Keystone Standard, and it’s on every job we do in Southwest Ranches.
Our technicians are background-checked and uniformed. They work in your home the way they’d work in their own mother’s. And because we’ve served this community long enough to know the difference between a ranch lot on Stirling Road and a zero-lot-line build in Sunrise, we treat every Southwest Ranches property as the one-off it is.
Our Custom Windows & Doors Services in Southwest Ranches
This is the work we do most often on Southwest Ranches estate homes and equestrian properties. Each of these services starts with the same step: we measure the actual opening, not the size of the old frame, because the old frame was rarely right to begin with. A link to our Custom Windows & Doors service page covers the full scope, but here’s what matters locally:
Custom Shape Windows
Southwest Ranches is full of arched transoms, eyebrow windows, round porthole glass, and trapezoid-shaped openings above ranch-style entryways. These windows were often built by hand when the house went up, and nobody stocks a replacement at a supply house. We cut and order custom-shape insulated glass units to fit the existing opening exactly, then set them in frames that meet current HVHZ standards. Seal failure around irregular glass edges is the most common problem we find, and we replace the full IGU rather than trying to patch a fogged pane.
Oversized Glass Panels
Many Southwest Ranches homes were designed to face the pasture, the pool, or the tree line, and that means wall-to-wall glass. Oversized panels on open ranch lots flex more under wind load than they would in a denser neighborhood, so we spec heavier glass thickness and stronger frames than a builder-grade install would use. We also handle the logistics of getting a 10-foot or 12-foot panel onto a multi-acre property without breaking it or the surrounding landscape.
Architectural Grilles & SDLs
Ranch-style architecture in Southwest Ranches often calls for divided lites that match the original 1970s or 1980s look. Simulated divided lites, or SDLs, give you that pattern on the exterior and interior of an impact-rated unit, and we match the bar profile and spacing to what the house already has. On a lot where the home’s character matters more than curb-appeal trends, grilles are usually the right call.
Commercial Storefront Glazing & Curtain Wall Systems
Some Southwest Ranches properties include agricultural offices, equipment buildings, or small commercial structures along the property line. Storefront glazing and curtain wall systems on those buildings face the same open-lot wind exposure as the main house. We install and service both, using commercial-grade aluminum framing that handles the sustained humidity and wind pressure that comes with sitting at the western edge of Broward County against the Everglades drainage basin.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Southwest Ranches
We’re an authorized installer for more than a dozen manufacturer lines, and on custom work in Southwest Ranches we most often quote ES Windows, ECO Window Systems, depending on what the opening needs and what the homeowner wants to spend. Because we quote manufacturer lines side by side on paper, you’ll see the difference in frame material, glass package, and warranty before you commit. Parts and service for these brands are stocked locally, so a follow-up visit to Southwest Ranches doesn’t wait on a warehouse across the country.
Common Custom Windows & Doors Problems We See in Southwest Ranches Homes
- Fogged custom-shape windows. Seal failure around irregular glass edges is routine on estate homes built in the 1970s through the 1990s. The fix is a full IGU replacement, not a stop-gap defogging, because the original seal was never designed for decades of South Florida humidity.
- Binding barn door rollers. Fine organic dust from unpaved equestrian paths packs into sliding door tracks and window weep holes. That dust absorbs moisture, corrodes hardware, and causes rollers to seize. Regular track cleaning helps, but the real fix is sealed bearing rollers and a dust-resistant track profile.
- Flexing single-pane frames. On open ranch lots with no neighboring buildings, original non-impact single-pane windows flex under wind load. That flex cracks glass around the edges and breaks seals prematurely. Impact-rated, HVHZ-compliant frames are the only long-term solution on these properties.
- Misaligned jamb hardware on oversized doors. Heavy swinging or sliding doors on stables and equipment buildings drift out of alignment when the frame settles or the track fills with dust. We re-square the jamb, replace the rollers, and check the reveal on every side before we call it done.
Pricing for Custom Windows & Doors in Southwest Ranches, FL
Custom work in Southwest Ranches prices differently than tract-home work because the openings are different. A custom-shape window with impact glass and architectural grilles typically runs $1,800 to $4,200 per unit, depending on glass package and size. Oversized glass panels start around $3,500 and go up from there, driven by panel dimensions and wind-load requirements. Sliding barn door hardware for equestrian outbuildings runs $1,200 to $3,800 installed, including track, rollers, and a heavier-gauge frame. Residential impact windows on non-standard openings fall between $2,200 and $5,000 per opening. Every estimate is free, line-itemed, and fixed before work starts. Call (772) 577-2915 to schedule yours.
One more thing on price: no change orders. The number we write on your proposal is the number on your final invoice. That’s been the rule at TruePane since Dale Kessler first put his name on the truck.
We Also Serve Cities Near Southwest Ranches
Our crews serve Southwest Ranches and the surrounding Broward cities, including Plantation, Lauderhill, Lauderdale Lakes, and Sunrise. If you have a custom window or door project in any of those areas, the same measurement-first process applies. See our Custom Windows & Doors in Southwest Ranches service area page for full coverage details.
Serving Southwest Ranches, FL - Our Local Coverage Area
We’re based in the Southwest Ranches area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Southwest Ranches
Because Southwest Ranches is Broward County’s only incorporated equestrian community, and its custom estate homes were built one at a time. Most of these houses went up between the mid-1970s and early 2000s, before Broward’s High Velocity Hurricane Zone product requirements existed, and the rough openings were cut to fit the house, not a manufacturer’s standard size sheet. That means off-the-shelf units simply don’t fit, and forcing them in would leave you with shimmed gaps, voided warranties, and a frame that works loose in the first good storm. We measure every opening twice and order custom units to the actual dimensions. Call (772) 577-2915 for an exact quote on your openings.
Yes, you generally need a permit for window and door replacement in Southwest Ranches, and because the town is not governed by a uniform HOA design code like neighboring Weston, the review is often tied to the town’s building department rather than a private architectural committee. Impact upgrades that meet current HVHZ code are the standard we install to, and we pull the permits, schedule the inspections, and don’t ask for final payment until the town signs off. If your property has any agricultural or equestrian outbuilding classifications, we check those requirements before we quote, because they can affect what’s allowed on the building.
Yes, we install heavy-duty sliding barn doors on horse barns throughout Southwest Ranches, and dust is the main reason they bind. Fine organic dust from unpaved equestrian paths packs into the track, mixes with humidity, and turns into a paste that seizes rollers. We use sealed bearing rollers, a dust-resistant track profile, and specify a heavier-gauge frame than you’d see on a residential sliding door. After install, we show you how to clear the track in five minutes with a stiff brush and a dry rag. Pick up the phone at (772) 577-2915 and we’ll come measure the barn opening.
For most Southwest Ranches properties, we recommend impact-rated laminated glass with a low-E coating and argon fill. But because your lot sits open with no windbreak, we spec a heavier glass thickness than the minimum HVHZ requirement, and we use a heavier-gauge flashing tape around the rough opening. On a recent job off Stirling Road, our crew replaced original 1970s single-pane casement windows with custom ViewLux impact-rated units, fusion-welded to fit the non-standard openings, and finished with low-E argon-filled glass to handle the added wind pressure and sustained humidity. The homeowner added architectural grilles to match the ranch-style architecture, and the install wrapped without disturbing the adjacent horse barn’s schedule.
We stage our equipment on hardscape or a driveway edge, never on paddock grass, and we confirm the access path with you before work starts. That means our team walks the property with you on the measurement visit, identifies the shortest route from truck to opening, and notes any gate widths, overhangs, or soft ground that would complicate the job. The price we quote accounts for the access as it actually is, so there’s no surprise labor charge on install day. Horses are routine around our crews, and we keep compression noise to a minimum around the barn. Call (772) 577-2915 to schedule your free measurement visit and we’ll talk through access before you commit to anything.
If you’re in Southwest Ranches and you’ve been putting off a custom window or door replacement, the best next step is a measurement. We’ll send a background-checked technician who measures every opening twice, quotes manufacturer lines side by side, and gives you a fixed number before any work begins. Dale Kessler’s rule still holds: if the pane is not true, the job is not done. Call (772) 577-2915 today and we’ll be there when we say.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Southwest Ranches and Broward County with years of glazing craft in the family.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.