Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Door Installation Across Wilton Manors
Door installation in Wilton Manors is rarely a simple swap. Most homes here are mid-century CBS block, built between 1950 and 1975, and the rough openings were framed for jalousie and louvered units that no longer exist on the market. A modern impact-rated door won’t fit those pockets without custom masonry work first. That’s the job we do every week. TruePane Windows & Doors serves Wilton Manors with crews who know this housing stock, the HVHZ code requirements, and what salt air off the Middle River does to hardware. If you’re replacing an entry door, a slider, or a custom pivot door, call (772) 577-2915 for a free estimate and a straight answer about what your wall will require.
Why TruePane Windows & Doors Is Wilton Manors’s Preferred Door Installation Company
We’ve been installing windows and doors across South Florida since 2008, and the homes in Wilton Manors keep us honest. The combination of concrete block walls, non-standard mid-century rough openings, and Broward County’s High-Velocity Hurricane Zone code means a sloppy install shows up fast. In this city, a door that’s out of true binds within the first humid June, and a frame that wasn’t flashed properly leaks during the first real summer storm. Our technicians measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers in writing before the truck leaves the driveway. That’s the Keystone Standard, and it’s how we’ve built a reputation in Wilton Manors for work that holds up.
Our founder, Dale Kessler, came up as a glazier, not a franchise operator. He built TruePane in 2008 around a rule he still keeps on the whiteboard: if the pane is not true, the job is not done. That applies to every door we set in Wilton Manors, whether it’s a simple entry door on NE 9th Avenue or a custom arched unit near the Middle River. A live person answers our phone 24 hours a day, seven days a week. You call, you get a person who knows this work, not a voicemail tree.
Our Door Installation Services in Wilton Manors
Our Door Installation team handles everything from standard entry replacements to fully custom architectural doors. These four services cover most of what Wilton Manors homeowners ask for:
Entry & Swing Doors
Entry doors in Wilton Manors sit in CBS walls that were poured with rebar voids and rough openings sized for 1950s hardware. We often see a 34-inch jalousie door opening where a modern 36-inch impact door needs to go. The fix involves saw-cutting the block, installing a structural buck, and setting the new frame level and plumb in one visit. Most entry door replacements here run $1,800 to $4,200 depending on the slab type and how much masonry resizing the opening requires.

Double & French Doors
Double French doors are popular in Wilton Manors because they open onto patios and pool decks, but they carry a heavier code burden than a single slab. Both panels must carry Florida Product Approval, and the threshold flashing has to handle the salt and humidity that roll off the Atlantic Intracoastal less than two miles east. We regularly replace corroded aluminum tracks and water-damaged sills on homes near Hagen Park and the Middle River. A double French door install in Wilton Manors typically runs $4,500 to $9,800 with HVHZ impact glazing.

Bifold & Folding Doors
Bifold doors are going into a lot of renovated Wilton Manors homes where owners want to open an entire wall to the backyard. The catch is structural: a 12-foot folding door in a CBS block wall means cutting out a load-bearing section and adding a steel header. We coordinate that engineering and pull the permit so the job passes inspection the first time. Pricing for bifold door systems in Wilton Manors starts around $8,000 and runs to $15,000 or more depending on panel count and glass package.

Pivot Doors
Pivot doors are the one request that shows up more in Wilton Manors than almost anywhere else we work. The city’s renovation wave pushes owners toward a dramatic entry statement. A pivot door swings on a top and bottom hinge rather than side hinges, and in a CBS wall that means the rough opening must be nearly perfect before the frame goes in. We’ve done pivot doors in Wilton Manors with custom glass, solid teak slabs, and steel frames. Expect $6,500 to $14,000 depending on the slab, the hardware, and the glass spec. Lead times, not labor, drive the schedule on these.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Wilton Manors
We’re an authorized installer for more than a dozen manufacturer lines, including. That matters in Wilton Manors because the HVHZ code doesn’t allow just any unit. Andersen and Marvin both make impact-rated French and sliding doors that meet Broward County’s requirements, and Pella’s Architect Series covers custom arched units. We stock common hardware and replacement parts for these brands locally, so a warranty follow-up on a door we installed doesn’t mean waiting two weeks for a part to ship. When we quote a door for your Wilton Manors home, we put the manufacturer options on paper side by side. You see exactly what you’re buying before you sign anything.
Common Door Installation Problems We See in Wilton Manors Homes
- Original louvered doors removed without addressing the non-standard masonry opening. The old door comes out, the new impact frame goes in, and the frame sits loose in the pocket because the rough opening was built for a mid-century jalousie unit. The first summer storm finds the gap. We size and reframe every opening before the new door is ordered, not after.
- Interior-moisture-rated hardware used on salt-air exteriors. Wilton Manors sits between the Middle River and the Intracoastal. Hardware that works fine in a dry inland entry corrodes within 18 months near the water. We spec marine-grade stainless hinges and latches on any door within a few blocks of the river or the Intracoastal.
- Custom pivot doors ordered with standard tempered glass instead of HVHZ impact-rated glazing. The architect specs a beautiful pivot, the permit office rejects the submittal, and the job stalls for six weeks. We check the glass spec against HVHZ requirements before anything is ordered. It saves the re-spec and the delay.
- Thresholds that were never flashed for wind-driven rain. South Florida storms push water horizontally. A door threshold that isn’t flashed with marine-grade tape and sloped away from the opening will leak under the slab within a season or two. We flash every threshold we touch, and we’ve repaired plenty that someone else skipped.
Pricing for Door Installation in Wilton Manors, FL
Door installation in Wilton Manors runs a real range, and the price depends on what’s behind the old jamb. A standard entry door replacement with minimal masonry work runs $1,800 to $4,200. Double French doors with HVHZ impact glazing run $4,500 to $9,800. Pivot doors and custom arched units run $6,500 to $14,000, sometimes more with specialty glass or a steel frame. The masonry resizing that CBS block homes almost always require adds $400 to $1,800 depending on the opening. What doesn’t change: our price is fixed in writing before the door is ordered. No change orders appear after we open the wall. Call (772) 577-2915 and we’ll give you a line-item quote for your Wilton Manors home. The estimate is free, and there’s no obligation.
We Also Serve Cities Near Wilton Manors
TruePane installs and services doors in Wilton Manors and the surrounding Broward cities. If you’re in Plantation, Lauderhill, Lauderdale Lakes, or Sunrise, our crews cover those areas with the same Keystone Standard and Done Right Promise. For Door Installation in Wilton Manors and nearby communities, call (772) 577-2915. We’ll send a technician who knows your city’s housing stock.
Serving Wilton Manors, FL - Our Local Coverage Area
We’re based in the Wilton Manors area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Wilton Manors
Yes. Every replacement door in Wilton Manors must meet Broward County’s High-Velocity Hurricane Zone standards, regardless of distance from the Middle River or the Intracoastal. HVHZ is a countywide designation, not a coastal-line rule. Your door and its glazing must carry Florida Product Approval, and the permit office will reject a non-impact unit. We handle the product approval paperwork as part of every install. Call (772) 577-2915 if you’re unsure whether your existing door would pass a code inspection.
Because Wilton Manors homes were built for jalousie and louvered door units, not the 36-inch-by-80-inch rough opening that modern impact doors assume. The original openings are often 2 to 3 inches off in width or height, and the concrete block around them may have rebar voids that complicate a clean cut. We saw-cut the block, install a structural buck, and set the new frame level and plumb. It’s standard work for us in Wilton Manors, but it’s the step that separates a door that seals from one that leaks. Call (772) 577-2915 for an exact assessment of your opening.
An arched door can absolutely meet HVHZ code if the glazing is impact-rated and the frame is engineered for the arch. The problem we see in Wilton Manors is when an architect or designer specs a beautiful arched unit with standard tempered glass. The permit office rejects it because the glazing doesn’t meet HVHZ impact standards. We order arched doors from Pella and Marvin with impact-rated arch glazing already specced. It costs more up front, but it passes permit the first time. Call (772) 577-2915 and we’ll quote your arched door with the right glass from the start.
Within three or four blocks, salt air becomes a measurable factor in hardware lifespan. Homes directly on the Middle River or within a few blocks of the Intracoastal should use marine-grade stainless hinges, latches, and threshold materials. We’ve replaced aluminum tracks and steel hinges that corroded within 18 months on riverfront properties. For a double French door near the water in Wilton Manors, we spec marine-grade hardware and flash the threshold with marine-grade tape as standard. Call (772) 577-2915 for a quote specific to your home’s exposure.
Plan for 10 to 16 weeks from order to install, and understand that the glass spec is what drives the schedule. A pivot door with architectural glass and HVHZ impact rating is a custom order from the manufacturer. The slab, the glass, and the pivot hardware all come from different suppliers, and the impact glazing has to be fabricated to spec. We keep you informed of the lead time at every stage and the price is fixed in writing before we place the order. If you want a pivot door by a specific date, call (772) 577-2915 early. We’ll give you a realistic timeline, not a sales pitch.
Door Installation in Wilton Manors, Done Right
Wilton Manors is not a city where a generic door installation makes sense. The CBS block walls, the non-standard mid-century openings, the HVHZ code, and the salt air off the Middle River all change how a door gets measured, ordered, and set. TruePane has been doing this work in South Florida since 2008, and we treat every Wilton Manors door the same way Dale Kessler has always done it: measure twice, set the frame true, flash the threshold, register the warranties in writing, and stand behind the work. The Done Right Promise covers every job we do. If it’s not done right, we make it right. No paperwork, no arguing.
Call (772) 577-2915 for a free estimate on door installation in Wilton Manors. A live person answers 24 hours a day, seven days a week. We’ll schedule your estimate, send a background-checked, uniformed technician, and give you a line-item quote with the manufacturer options on paper. That’s a square deal.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Wilton Manors and surrounding Broward County communities with years of glazing and door installation craft.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After