Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Sliding & Patio Doors Across Pembroke Park
Sliding and patio door replacement in Pembroke Park usually costs between $2,800 and $7,500 depending on the opening size, glass package, and what our crew finds inside the wall once the old unit comes out. Every door we install here must carry a Miami-Dade Notice of Acceptance (NOA) or HVHZ-compliant Florida Product Approval, because Pembroke Park sits entirely within Broward County’s High Velocity Hurricane Zone. That’s not optional, and it’s not something we negotiate. Call (772) 577-2915 to schedule a free estimate and we’ll walk you through exactly what your home needs.
We know Pembroke Park’s housing stock, because we work on it every week. The town is built almost entirely of mid-century concrete block homes from the 1950s and 1960s, and most still have the original rough-buck openings sized for jalousie or early aluminum sliders. When you open up one of those walls, you do not find a clean opening ready for a modern frame. You find dry rot, out-of-square masonry, and framing that predates current code by sixty years. That is exactly what we plan for, and it is why our estimates are written with allowances, not guesses.
Why TruePane Windows & Doors Is Pembroke Park’s Preferred Sliding & Patio Doors Company
We have been installing and replacing Sliding & Patio Doors in South Florida long enough to know that Pembroke Park is different from the cities around it. The town has its own building department, which means permits, inspections, and plan reviews do not go through Broward County. A contractor who works streets away in unincorporated Broward but has never pulled a Pembroke Park permit can burn two weeks figuring out the submittal portal. We know the process, the inspectors, and what they look for, because we go through it on nearly every job here.
Dale Kessler founded TruePane Windows & Doors in 2008 around a rule that still sits on the whiteboard at our shop: if the pane is not true, the job is not done. That is not a slogan. It is the standard our crews work to on every sliding door, every patio door, and every inspection. We measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves the driveway. Our reputation in Pembroke Park is built on showing up when we say we will and standing behind the work in writing. That includes the Done Right Promise: if it is not done right, we make it right. No paperwork fights, no arguing.
We understand the customer here. Many Pembroke Park homeowners have lived in the same house for twenty, thirty, even forty years. They have seen what salt air does to a cheap aluminum frame. They have lived with a sliding door that binds in July and rattles in August. They are not shopping for the lowest bid. They want a company that will still be in town and still answer the phone if something goes wrong. We plan to be.
Our Sliding & Patio Doors Services in Pembroke Park
Different Pembroke Park homes need different door solutions, and we do not treat a 1950s CBS rancher the same as a newer build near the municipal complex. Here is what we handle most often for Pembroke Park homeowners.
Patio Sliding Doors
A standard two-panel patio sliding door in Pembroke Park typically runs $2,800 to $4,800 installed, depending on the glass package and whether the rough opening is square. Most homes here still have the original single-pane aluminum slider, which means the opening was never flashed properly and the frame has been corroding for decades. We pull the old unit, inspect the buck, and correct the opening before the new door goes in. You get a door that slides on rollers sized for marine-grade use, not one that seizes up after two hurricane seasons.

Panoramic Sliding Systems
Panoramic sliding systems, which open a wall almost entirely to the outside, are a growing request in Pembroke Park as homeowners lean into South Florida’s indoor-outdoor living. These are big units, often 12 to 20 feet wide, and they demand a sturdier header and a perfectly level track. On a mid-century home, that usually means structural reinforcement to the concrete block opening. Cost for a panoramic system here runs $6,000 to $15,000 or more depending on the number of panels and the glass spec. We will not quote one without measuring the opening and checking the header first.

Heavy-Duty Sliding Doors
Heavy-duty sliding doors are built for openings that get used every single day, often as a front entry or a main access point to a patio. In Pembroke Park, where salt-laden air eats non-marine aluminum, the hardware on a heavy-duty unit matters. We specify stainless steel rollers and marine-grade track systems. A heavy-duty slider in this market typically runs $3,500 to $6,500 for a two-panel unit with impact glass. For wider openings or higher wind loads, the number moves up. Every unit we install complies with the HVHZ requirements the Town of Pembroke Park will inspect.

Pocket & Barn Doors
Pocket and barn doors are a different animal in an older CBS home, because the pocket cavity sits inside a concrete block wall. Retrofitting a pocket door into a 1960s Pembroke Park wall is real structural work: you are cutting into block, reframing, and often relocating electrical. We do it, but we quote it accurately. Barn doors, which mount on a track outside the wall, are a simpler and often more cost-effective option for many Pembroke Park layouts. A barn door kit with installation starts around $900; a true recessed pocket door in a CBS wall starts around $3,000 and goes up from there. We will tell you plainly which makes sense for your wall before you spend a dollar.
Screen Door Installation
Every sliding door in South Florida deserves a good screen door, and Pembroke Park’s mosquito season runs long. We install and service retractable and sliding screen doors matched to the new or existing door frame. A quality retractable screen for a standard patio slider runs $350 to $700 installed, and it is one of the best-value upgrades you can make to a door you use daily.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pembroke Park
We are an authorized installer for more than a dozen manufacturer lines, including. That matters in Pembroke Park for a specific reason: when a homeowner calls us about a sliding door from a line we install, we know the hardware, we know the track system, and we know what parts are compatible. We quote side by side on paper so you can see exactly what you are buying and what each line costs before you commit. We do not push one brand. We show you the numbers and let the door earn the sale.
Common Sliding & Patio Doors Problems We See in Pembroke Park Homes
- Seized rollers from salt corrosion. Three miles from the Atlantic, the air here is wet and salty. Non-marine aluminum rollers corrode until the door will not slide, and homeowners who have lived with a jammed panel for years forget what a working door feels like. We replace the rollers or the whole frame depending on the damage.
- Twisted frames in out-of-square CBS openings. Mid-century concrete block was not always poured square. A modern fusion-welded frame forced into a rough opening that is off by half an inch or more will bind, twist, and eventually fail the insulated glass seal. We correct the opening, not the door.
- Rotted wood bucks hidden behind stucco. This is the one nobody expects. The original wood buck surrounding the opening wicks stormwater for decades, and by the time we pull the old jalousie out, the wood is powder. We write the buck replacement into the estimate as an allowance so it is not a surprise line item mid-job.
- Missing flashing tape and water intrusion. Most 1950s and 1960s Pembroke Park homes have no flashing tape behind the stucco around the door opening. When we install a new slider, we flash it properly before the new stucco goes back on. If we do not, water gets into the wall cavity and you are back here in five years buying another door.
Pricing for Sliding & Patio Doors in Pembroke Park, FL
Here are the numbers as they stand in this market. A basic patio sliding door in Pembroke Park runs $2,800 to $4,800. A heavy-duty sliding door runs $3,500 to $6,500. Panoramic sliding systems start around $6,000 and go to $15,000 or more. Pocket doors in CBS walls run $3,000 and up. Screen doors add $350 to $700. Those ranges include the door, installation, flashing, and the permit work through the Town of Pembroke Park. They do not include buck replacement or masonry correction if the wall reveals problems, which is common in this housing stock. We write allowances into the estimate so you see the range before we start, and any change order is priced and approved in writing before our crew touches it. Call (772) 577-2915 for a free, written estimate with no obligation.
We Also Serve Cities Near Pembroke Park
Our crews work regularly in Plantation, Lauderhill, Lauderdale Lakes, and Sunrise. If you are in one of those cities and need a sliding or patio door inspected or replaced, the same team, the same warranty registration, and the same estimate process apply. Call (772) 577-2915 and we’ll schedule a visit.
Serving Pembroke Park, FL - Our Local Coverage Area
We’re based in the Pembroke Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Pembroke Park
Yes and no. Pembroke Park sits entirely inside Broward County’s High Velocity Hurricane Zone, the same HVHZ that covers Hollywood, Miramar, and every coastal city in the county. The wind code itself is the same. What is different is the enforcement path: Pembroke Park is an incorporated town with its own building department, so the permit, plan review, and inspection run through the Town of Pembroke Park, not through Broward County. A door that meets Miami-Dade NOA or HVHZ Florida Product Approval standards is required everywhere in this area. We specify compliant units on every job and handle the Town’s submittal process end to end. Call (772) 577-2915 for a free estimate and we’ll confirm what your opening needs.
Because the old jalousie was never meant to hold a modern impact-rated sliding panel. The original rough opening is usually out of square, the wood buck behind the stucco is often rotted, and the opening was never flashed to keep water out. That means the scope of work includes masonry correction, buck replacement, and proper flashing before the new door goes in. A contractor who quotes a simple swap is either not planning to pull a permit or is going to hit you with a change order the moment the stucco comes off. We write allowances into the estimate up front so the number you see is the number the job looks like. Call (772) 577-2915 and we’ll inspect your opening before we quote.
Yes. Pembroke Park has its own building department with its own inspectors, and work performed without the right permit can be stopped and red-tagged. Worse, an unpermitted sliding door is a liability when you sell the house, because the next buyer’s inspector will flag it. We pull every permit through the Town of Pembroke Park for every door we install. It is not optional and it is not something we will skip to save a few hundred dollars. Call (772) 577-2915 and we’ll handle the paperwork from start to final inspection.
Look for the etched marking in the corner of the glass. Every impact-rated unit carries a permanent label identifying the manufacturer, the standard it meets, and the Miami-Dade NOA or Florida Product Approval number. If the glass has no marking, it is almost certainly not impact-rated, and on a home three miles from the Atlantic, that is a real vulnerability. We can inspect your existing door and tell you definitively whether it will pass the next storm or whether it needs replacement. Call (772) 577-2915 to schedule a look.
A broken seal means the insulating gas between the glass panes has escaped and the glass is now just two pieces of glass with damp air between them. You will see fog or condensation, and the door loses most of its thermal performance. In Pembroke Park’s humid climate, that also means the glass sweats and the frame collects moisture. Your air conditioner works harder, and the seal will never fix itself. Replacing the sealed glass unit or the entire door is the only real fix. Call (772) 577-2915 for a free estimate and we’ll tell you what the repair or replacement will cost before you decide.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Pembroke Park with honest pricing and properly permitted sliding and patio door installation.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After