Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Pembroke Park
Door installation in Pembroke Park carries a set of rules most contractors in Broward County never deal with. This town has its own building department, and every door we hang here has to pass inspection through the Town of Pembroke Park, not the county. That’s a different portal, a different plan reviewer, and a different inspection queue than the same job ten blocks west in unincorporated Broward. We’ve been through it enough times to know what the Town wants to see, and we quote it honestly from the first visit. If you’re on Southwest 25th Street, off Hallandale Beach Boulevard, or tucked into the Lake Forest neighborhood, call us at (772) 577-2915 and we’ll walk the job with you before you spend a dime.
Why TruePane Windows & Doors Is Pembroke Park’s Preferred Door Installation Company
Pembroke Park is small, roughly 0.6 square miles, and it’s mostly CBS homes from the 1950s and 1960s. That matters to us because we see the same failure patterns on nearly every street: original aluminum door frames pitted from salt air, jambs sagged out of square, and hinges seized so badly the door scrapes the threshold by August. We’re not guessing when we quote a door here. We know what’s behind the stucco on these homes because we’ve opened enough of them.
Our Pembroke Park customers call us back because we show up when we say, we quote on paper, and we register both warranty layers before the truck leaves the driveway. That’s the Keystone Standard, and it’s written into every job. Dale Kessler founded TruePane in 2008 on a rule that still hangs on our shop wall: if the pane is not true, the job is not done. We’ve carried that rule into every door installation we’ve done in Pembroke Park since.
We’re not the cheapest bid, and we won’t pretend to be. We’re the crew that shows up with background-checked, uniformed technicians who measure every opening twice and tell you the truth about what your opening will and won’t accept. That’s why homeowners who’ve lived in Pembroke Park for twenty-plus years keep our number.
Our Door Installation Services in Pembroke Park
Entry & Swing Doors
Most of the entry doors in Pembroke Park are original aluminum units from the 1950s and 1960s, fastened into rough-buck openings that were never perfectly square. Salt air from the Atlantic, roughly three miles east, pits non-marine-grade aluminum and seizes the hinges. Our Door Installation team replaces those doors with impact-rated units on marine-grade hardware, re-bucking the opening when needed so the door actually closes square. We pull the permit through the Town of Pembroke Park, not the county, and we schedule the inspection ourselves.
Double & French Doors
We install a lot of double and French doors in Pembroke Park, mostly as patio transitions in mid-century CBS homes where the original slider finally failed. The challenge with these older homes is the same one we see on entry doors: the rough opening is rarely square, and the jamb needs flashing tape and proper anchoring into the masonry. A double door multiplies the alignment problem because both panels have to seal against each other in the center. We quote the buck work up front so there’s no surprise line item on the final bill.
Storm Doors
Storm doors on Pembroke Park homes take a beating from salt air and afternoon thunderstorms rolling in off the Atlantic. Cheap storm doors with aluminum frames and steel hinges corrode fast here. We specify marine-grade finishes and stainless hardware. For homes that want a storm door over an HVHZ impact door, we make sure the combination is code-compliant through the Town’s building department, because that detail trips up plenty of out-of-town installers.
Pivot Doors
Pivot doors are heavier than hinge-hung doors, and on older CBS homes in Pembroke Park that means the floor and header have to be checked for load before we hang anything. We’ve installed pivot doors on a handful of custom homes in the Park Lake Estates area, and every one required masonry anchoring that a standard hinge door would not. If the pivot isn’t perfectly plumb, the door will drift or bind, and we don’t leave until it’s right.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pembroke Park
We’re an authorized installer for more than a dozen manufacturer lines, and for Pembroke Park we lean on brands that engineer for coastal conditions. ViewLux fusion-welded impact doors hold up far better against salt air than mechanically fastened aluminum frames, and we stock their hardware locally so replacement hinges and sweeps don’t take two weeks to arrive. ES Windows and Andersen are also common on our Pembroke Park quotes, and we’ll lay out manufacturer options side by side on paper so you see exactly what you’re buying before you sign anything.
Common Door Installation Problems We See in Pembroke Park Homes
- Corroded original aluminum frames and hardware. Salt-laden air from the Atlantic three miles east pits non-marine-grade aluminum within a decade. We routinely pull doors off 1950s CBS homes where the hinges snap off the jamb from corrosion, not age.
- Out-of-square CBS rough openings. Pembroke Park’s mid-century concrete block homes were built fast, and the original rough-buck openings for doors and jalousie windows were rarely square. A pre-hung impact door installed without re-bucking and proper masonry anchoring will bind or leak.
- Permit rejections from using Broward County forms. Pembroke Park is an incorporated municipality with its own building department and submittal portal. Contractors who file through Broward County get rejected and the homeowner waits weeks for a re-submittal.
- Fogged glass in original door panels. Many early aluminum slider and French door units in Pembroke Park were single-pane, and when the seal fails, the glass fogs. On doors this old, we almost always recommend full replacement, not a glass swap, because the frames are too corroded to re-glaze well.
Pricing for Door Installation in Pembroke Park, FL
A standard impact-rated single entry door in Pembroke Park runs $2,800 to $4,600 installed, including the Town permit and inspection. Double French doors start around $3,900 and top out near $7,500 depending on width, glass package, and how much buck work the opening needs. Storm doors run $600 to $1,400. Pivot doors are a different animal entirely: $6,000 to $12,000, with engineering time included. What moves the price in Pembroke Park specifically is the condition of the rough opening and whether we have to re-buck the masonry. We’ll give you a written, line-item quote before work starts, no surprises, and we’ll pull the Town of Pembroke Park permit ourselves. Call (772) 577-2915 for a free estimate.
We Also Serve Cities Near Pembroke Park
Our crews serve Pembroke Park and the surrounding Broward communities. If you’re in Plantation, Lauderhill, Lauderdale Lakes, or Sunrise, we bring the same Keystone Standard to your door: written quotes, registered warranties, and a team that shows up on time. Dispatch and scheduling are coordinated from our South Florida office, but the crews work these neighborhoods daily.
Serving Pembroke Park, FL - Our Local Coverage Area
We’re based in the Pembroke Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Pembroke Park
You need a permit from the Town of Pembroke Park, full stop. Pembroke Park is an incorporated municipality with its own building department, and Broward County forms will not be accepted. We handle the Town submittal, plan review, and inspection scheduling for every door we install there, so you don’t have to learn the portal. Call (772) 577-2915 and we’ll walk you through it.
Pembroke Park sits roughly three miles from the Atlantic, and the salt-laden air accelerates corrosion on non-marine-grade aluminum and uncoated steel hardware. Original doors from the 1950s and 1960s were rarely built with marine-grade finishes, so the frames pit, the hinges seize, and the bottom sweeps rot out far sooner than the same door would ten miles west. We spec stainless steel hinges, marine-grade sweeps, and impact-rated frames built for coastal exposure. Call us for a free estimate at (772) 577-2915.
In almost every case, the wall does not need rebuilding. We re-buck the rough opening, which means we remove the original wood buck, square it up with new pressure-treated or composite material, anchor it properly into the masonry, and then flash the jamb before the new pre-hung impact door goes in. This is standard work for us on 1950s and 1960s CBS homes in Pembroke Park. The honest answer on cost: re-bucking typically adds $400 to $900 to the job, and we’ll quote it up front so you know exactly what you’re paying for. Call (772) 577-2915 for a detailed quote.
Every replacement door in Pembroke Park must be HVHZ-compliant, which means it carries a Miami-Dade Notice of Acceptance or an HVHZ-compliant Florida Product Approval. For entry doors, that almost always means impact-rated glass: laminated insulating glass units that meet Miami-Dade County’s missile impact and cyclic pressure standards. We’ll quote HVHZ-compliant doors from manufacturers like ES Windows, and Andersen, and register both warranty layers in writing before we leave your driveway. Call (772) 577-2915 and we’ll explain your options on paper.
If the door is a modern insulated glass unit with a failed seal, we can sometimes replace just the glass panel. But most fogged doors we see in Pembroke Park are original single-pane aluminum units from the 1950s or 1960s, and those cannot be re-glazed cleanly because the frames are too corroded and the openings are not sized for modern glass packages. For doors that old, full replacement is almost always the better call, and it gets you an HVHZ-compliant impact door instead of a repair on a frame that’s already failing. Call (772) 577-2915 for a free assessment.
Call TruePane Windows & Doors for Door Installation in Pembroke Park
If you live in Pembroke Park and your door is corroded, binding, or fogged, call us at (772) 577-2915. We’ll come out, measure the opening twice, quote your options on paper, and tell you exactly what the Town of Pembroke Park will require. Estimates are free. We stand behind the work, the warranty, and the price, in writing.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Pembroke Park and surrounding Broward County communities with the Keystone Standard.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.