Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Custom Windows & Doors Across Tamarac
Tamarac homeowners looking for custom windows and doors face a specific problem: most stock units do not fit the rough openings in this city’s 1965-1985 CBS housing stock. TruePane Windows & Doors measures every opening twice, orders custom or semi-custom units sized to the actual masonry, and installs them to Miami-Dade NOA standards the first time. We serve the entire Tamarac area, from the Woodlands to the 55+ sections along Southgate Boulevard and McNab Road. Call (772) 577-2915 for a free estimate and a written line-item quote on paper.
Key Takeaways for Tamarac Homeowners
- Most Tamarac homes built between 1965 and 1985 have non-standard window rough openings. Direct-swap units rarely fit without masonry adjustment.
- Every replacement window and exterior door in Tamarac must carry a Miami-Dade County Notice of Acceptance (NOA) because all of Broward County sits in the High-Velocity Hurricane Zone.
- Original jalousie windows cannot be retrofitted to HVHZ compliance. A permitted project on a home with jalousies legally triggers full-opening replacement.
- Custom impact windows typically run $900-$2,400 per opening in Tamarac, including installation. Architectural grilles and SDLs add $150-$400 per unit.
- TruePane registers both manufacturer warranty layers in writing before the truck leaves your driveway. That is the Keystone Standard, and we put it on every job.
Why TruePane Windows & Doors Is Tamarac’s Preferred Custom Windows & Doors Company
Tamarac is not a generic Broward suburb. It was purpose-built as a planned retirement city starting in the mid-1960s, and that history shows up in the homes. We have worked on enough CBS single-family houses and low-rise condos here to know that the rough openings are rarely square, rarely standard, and rarely forgiving. Our techs adjust masonry anchors on nearly every custom window and door job in Tamarac. That is not a problem we discover on site. It is the thing we plan for before the first screw goes in.
TruePane is led by Dale Kessler, a second-generation glazier who started the company in 2008 on a rule he still keeps on the whiteboard: if the pane is not true, the job is not done. We hire local, train apprentices into journeymen, and act like a company that plans to be in Tamarac in thirty years. A live person answers our phone 24 hours a day, seven days a week. Not a voicemail tree. Not a callback form. You call, a person answers. That matters when you are a senior on a fixed income trying to get a straight answer about whether your windows can survive one more hurricane season.
We are also an authorized installer for more than a dozen manufacturer lines, including PGT, CGI, ES Windows. We quote those lines side by side on paper so you see exactly what you are buying and what each option costs before you commit. Every quote is a fixed price. No change orders on the back end. No surprise line items. If the pane is not true, the job is not done, and we stand behind it in writing.
Read more about our Custom Windows & Doors process and what the Done Right Promise covers.
Our Custom Windows & Doors Services in Tamarac
Custom Shape Windows
Arched, round, octagonal, trapezoid: Tamarac’s 1970s homes occasionally feature shaped glass that stock manufacturers no longer produce in the original dimensions. When those units fail, the fix is not a retrofit kit. It is a custom-fabricated replacement built to the actual opening, glazed with impact-rated laminated glass, and installed with new flashing and anchors. In Tamarac, a custom arch or radius window typically runs $1,100-$2,800 installed, depending on size and frame material.

Impact-Rated Custom Windows
Every exterior window in Tamarac must meet HVHZ standards, which means Miami-Dade NOA-rated glazing. We build custom impact units from PGT, CGI, and ES Windows lines. The glass is laminated, the frames are reinforced, and the product approval number goes on your paperwork. For Tamarac homeowners facing insurance renewal deadlines, we provide the documentation your carrier needs to verify code compliance. A typical custom impact window in a CBS opening runs $900-$2,400 installed.

Architectural Grilles & SDLs
Simulated divided lites, or SDLs, keep the original look of a mid-century Tamarac home without sacrificing impact ratings. We install exterior and interior grille profiles matched to the home’s existing sightlines, including colonial, prairie, and custom patterns. For 55+ community homes with deed restrictions on exterior appearance, we match the original grille style before we order the unit. Grilles and SDLs add roughly $150-$400 per window, and we show that as a separate line on the quote so you see exactly what you are paying.

Custom Doors for CBS Openings
Front entry doors, sliding patio doors, and side lites in Tamarac’s older concrete block homes have the same non-standard opening problem as the windows. We order custom doors to the actual rough opening, install them with masonry anchors, and register the warranty in writing. Impact-rated front entry doors in Tamarac run $2,500-$6,000 installed, including frame, hardware, and NOA documentation. Sliding glass patio doors run $1,800-$4,500 depending on width and glass package.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tamarac
We are an authorized installer for PGT, CGI, ES Windows, among others. That matters because warranty claims move faster when the installer has a direct relationship with the manufacturer. We quote brands side by side on paper so Tamarac homeowners see the actual difference in glass, frame construction, and warranty duration before they spend a dollar. We do not push one line. We show you the facts and let you decide. And we register both warranty layers before the truck leaves your driveway. That is the Keystone Standard, and no one else in Tamarac offers it in writing.
Common Custom Windows & Doors Problems We See in Tamarac Homes
- Seal failure in aging aluminum insulated glass units. Tamarac’s intense UV exposure and brackish inland air eat through sealant on 30- and 40-year-old aluminum frames. Homeowners eventually notice fogged panes and lost argon fill. By then the insulating value is gone and the only honest fix is a full unit replacement, not a reseal job.
- Jalousie windows still in service. Many of Tamarac’s older 55+ community homes still have louvered glass-slat jalousie windows. They cannot be brought into HVHZ compliance under any circumstance. A homeowner who calls for a simple broken-pane repair on a jalousie is actually looking at a full-opening replacement, which catches many fixed-income seniors off guard.
- Non-standard rough openings on original CBS homes. The 1965-1985 concrete block construction in Tamarac means window openings are often 1 to 2 inches off modern standard sizing. Direct-swap units do not fit. Fly-by-night installers will force a standard unit in with shims and caulk, and that opening will leak and fail inspection. We measure and order custom-sized units instead.
- Insurance-driven replacement pressure. Florida’s homeowner’s insurance crisis is hitting Tamarac’s long-tenured senior population hard. Carriers are demanding proof of HVHZ-compliant openings or issuing cancellation notices. We help homeowners prioritize which openings need impact-rated custom units first to stop the bleeding and keep the policy in force.
We replaced a set of irreplaceable jalousie windows on a 1972 CBS home in the Woodlands section of Tamarac with custom-sized, Miami-Dade NOA-rated impact casement windows from Andersen. The original openings were 1.5 inches narrower than any standard unit, so our techs adjusted the masonry anchors and installed fusion-welded frames with flashing tape before setting the sashes. The homeowner, who had called for a simple repair, ended up with a fully code-compliant opening and a lower insurance premium after proof of HVHZ compliance. That is the difference between a company that sells windows and a company that understands Tamarac’s homes.
Pricing for Custom Windows & Doors in Tamarac, FL
Here is what Tamarac homeowners should expect to pay for custom windows and doors, installed, with Miami-Dade NOA-rated product and written warranty registration:
- Custom impact single-hung or casement window, standard size: $900-$1,600 per unit
- Custom impact window, oversized or non-standard rough opening: $1,400-$2,400 per unit
- Custom shape window (arch, radius, trapezoid): $1,100-$2,800 per unit
- Architectural grilles or SDLs: add $150-$400 per unit
- Impact-rated custom front entry door system: $2,500-$6,000 installed
- Impact-rated sliding glass patio door: $1,800-$4,500 installed
Three things move the price: the size of the opening, the type of frame (aluminum versus vinyl versus clad wood), and whether the existing opening needs masonry anchor adjustment, which most Tamarac CBS homes do. The quote we give you is the price you pay. Fixed. In writing. Call (772) 577-2915 for a free estimate and a side-by-side quote on the manufacturers you are considering.
We Also Serve Cities Near Tamarac
Our crews work throughout Tamarac and the surrounding Broward communities, including Plantation, Lauderhill, Lauderdale Lakes, and Sunrise. Same crew, same Keystone Standard, same written warranty registration on every opening. If you live in one of those cities, you will get the same fixed pricing and the same live-person phone answer.
Serving Tamarac, FL - Our Local Coverage Area
We’re based in the Tamarac area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Tamarac
No. Jalousie windows provide virtually no wind or water resistance and cannot be retrofitted to HVHZ compliance under any circumstance. A permitted window project on a Tamarac home with jalousies legally triggers full-opening replacement. We understand that is a surprise when you called for a simple glass repair. We walk you through the replacement cost honestly and help you prioritize which openings to do first so the project fits your budget. Call (772) 577-2915 and we will give you a straight answer after looking at the openings in person.
Tamarac’s housing stock was built between 1965 and 1985 as a planned community, and the concrete block openings on those CBS homes are frequently 1 to 2 inches off modern standard window sizing conventions. A standard-size replacement window will not fill the opening properly without excessive shimming and caulk, which leads to air leaks, water intrusion, and failed inspections. We measure every opening twice and order custom or semi-custom units sized to the actual masonry. The cost difference between a standard unit forced into a non-standard opening and a custom unit sized correctly is usually $200-$500 per window. The custom unit is the cheaper decision over the life of the home.
If you see fogging, condensation between the panes that does not wipe off, or a hazy film that will not clean, the seal on the insulated glass unit has failed and the argon gas fill is gone. Tamarac’s high humidity and intense UV exposure accelerate this failure on aging aluminum frames, particularly on homes where the original windows are decades past warranty. Once the seal fails, the only honest fix is replacing the unit. A reseal job does not restore the gas fill or the insulating value. We inspect failed units in Tamarac for free and give you a written replacement quote on the spot.
In most cases, yes. Florida insurance carriers discount premiums for homes with documented HVHZ-compliant openings, and many carriers now require proof of Miami-Dade NOA-rated windows and doors before they will write or renew a policy. We provide the documentation your carrier needs, including product approval numbers and installation records. The homeowner in the Woodlands whose jalousies we replaced with custom Andersen impact casements saw a lower premium after submitting proof of compliance. We cannot quote the exact discount your carrier will apply, but the documentation we provide is what they ask for. Call (772) 577-2915 and we will explain the paperwork trail on any unit we install.
A standard non-impact replacement window in a typical Tamarac opening runs $600-$1,000 installed, while a custom Miami-Dade NOA-rated impact window runs $900-$2,400 installed. The gap closes when you factor in the cost of forcing a standard unit into a non-standard CBS opening: masonry anchor adjustment, extra flashing work, and the risk of a failed inspection. And the standard unit will not satisfy your insurance carrier. The custom impact unit is the only one that checks every box: code compliance, insurance documentation, and fit. We quote both options side by side on paper so you see the real numbers before you decide. Free estimates are always available at (772) 577-2915.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Tamarac, FL.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After